The Level D 767 | Wilco PIC 767 Forum

Hello everyone,I've been using a "homemade" PIC-POSKY merge for a long time now. I go the POSKY files from my VA, along with some ".air" files that I don't believe are original POSKY, and some aircraft.cfg. I aliased the panel & sounds, and added the PIC "electrical" section into the aircraft.cfg. Everything appeared to work correctly, but I have no idea how accurate the FDE was.About a week ago, I came across the PIC Flying Club webpage, and downloaded the "official" PIC-POSKY merge available there. It installed fine, built up the .cfg files, copied the ".air" file, etc. I tried out the plane, it started up fine, and appeared to take off fine (I'm not a 767 driver in…

ive been trying to figure this one out for awhile. on the legs page entry theres sometimes a waypoint with an entry like (500) 090 trk .is basically a track heading with an altitude restriction then another one follows. How do you punch those types of waypoints in from the fmc from what i know you need a location first . And is not a radial entry cause it would show as one.

Hi there,has any one tried to use the Gamma Ray board -manufactured by Beta innovations- in PIC 767. thanks,mofa

OK fellas, it's Sinbad again.I have been able to find out what the LRC function is through a search on this forum. I have not been able to discover what the flap/spd function on the APP REF page does or about the ECON or ENG OUT blocks on the VNAV page. Have I missed something in the manual or is it like the LRC function and not implemented?You all have been a great help by the way. I appreciate it.ThanksSinbad

Hello, I don't want to confuse this with engine anti-ice, but can wing-anti ice be turned on after start in icing conditions? I read somewhere that the valves stay closed on the ground. Does it even work on the ground? And is it even necessary when the deicing vehicles can deice you? Can someone give me the rundown on when it can or cannot be used? Thank you :-wave

Hi Guys,It appears someone has got the PIC767 working in FS9, however, it does appear pretty complex;http://www.flightsimnetwork.com/dcforum/DC...mID3/11131.htmlLet's hope version 2 arrives soon.

is there anyway to get the 767 into FS2004? i really dont want to reinstall FS2002 because of comp space.adamYou cant truley understand flying until you have actually tasted and felt it.

Simavionics have authorised me to provide a preview of their upcoming 757/767 Replica Throttle Quadrant. http://forums.avsim.net/user_files/56045.jpgThis is a heavy duty unit that features a full die cast metal casing, base, levers and handles.The electronics are supplied by Betainnovations, a company run by Leo LaClava. Leo is one of the premier developers of USB electronic components for FlightSim hardware.For durability MIL SPEC Potentiometers are used throughout.For me the best part about this product is the price. $349 US + Shipping. This is cheaper than the Go-Flight Unit.Simavionics plan to be launching their website over the next few days. I will be one of the 1st…

Simavionics have posted an update about the upcoming 757/767 Throttle Quadrant.www.simavionics.com

Hi,I'm back from christmas holidays, and online again. So, if you have requested the FDE in the past few days (1-2 weeks), email me again, so I know which ones I haven't still sent. I got over 650 emails, which I just hammered through, and I might have missed some [email protected]

Hello,Where can I find the night bitmap for the PIC 767 main panel? I have looked but cannot find it anywhere.Regards,Alexander Martin.

Until the 767PIC Flying club flight just before Christmas it is a while since I flew the 767PIC but during that flight and a subsequent one I noticed I no longer have landing or taxi lights visible from Randy's landing view.AFAIK nothing has changed since I flew 767PIC more regularly other than a graphics card change, this change is reflected in fs2002.cfg.I am using the PIC/POSKY merge with Randy's landing view and do get rain on the windscreen.If anyone could suggest what to look for to get the landing and taxi lights back I would be grateful.I have checked the zip file for Randy's modified view and all files, including the gauge files look to be OK.I don't know if this…

Hello everyone. About a week ago I had to reinstall fs2002 and now I need to reinstall the PIC767. I purchased the download version about three months ago. I put it on to a CD as a back up. When I opened the CD, the set up comes up as a white box and it won't run. Please help me. I am about to just buy the boxed version. Erik

On my PIC EHSI, near the speed tape is during climb a green F wich desapears some time later. I did not find in the manual what means this F.Can anybody help me?ThanksPeterLSZHPIC and WidevieW user.

Dear PIC V2 makers,Besides all the features that allready exist as add ons and will be incorporated no doubt, like framerate friendly exterior, Landing panel, taxispeed fix and TCAS , these two things are what I hope for most in PIC Ver 2:- Autocoordination dissengaging when A/P off, or semi-hidden clickspot for dissengaging autocoordination.- Panel including the Stand By Instruments, perhaps as an alternative... (Have BIG monitor).:-wave

Several times have prgramed some electrical failures, both on the ground and in flight. Each time the failure occurs the computer freezes. CONT+ALT+DEL then task mgr- cancel, then back to FS and continue with the failure and flight. Anybody have any ideas as to what the problem could be? No other problems with my system or programs. Thanks, lr.AMD Anthlon 1.4GeForce IV, 256mb

Hello,I thought I just post some shots of a "new" 767. http://forums.avsim.net/user_files/56371.jpghttp://forums.avsim.net/user_files/56373.jpgThe 767-200!http://forums.avsim.net/user_files/56374.jpg Included are all models and variants. It's not 100% accurate but what model is? Also the frame rates are good. You can download the aircraft here; (you have to register to download it.)www.ai-china.netI hope they will all get painted up in some attractive liveries sometime soon. Hopefully the PIC767 gauge problem can be solve too with a little program called "style builder" but I'm not holding my breathFinally, bring on the PIC767v2!

Question: Is there anyway to get the PIC767 to work in FS2004?Dear forum readers and community. When this question listed above gets asked again,and no doubt it will, what we ALL should respond with is listed below. After the post is answered once, no one should respond again to any other posts pertaining to the thread, unless it is re-posted another time in a new thread, by yet another bonehead who is to lazy to search.I personally, am really sick of hearing that the pic767 is being "chopped up" in feable attemps, to make it work in FS9. The 767V2 is coming. Paitence is required.OFFICIAL ANSWER: asked many times...answered many times...you might want to try a search.My $…

Hi guys,My provider has blocked my web site again due to the download data limit of 1Gb per month. And this time after a record braking 5 days!I'm sorry you'll have to wait till February first. Hope to show you a picture of my finished PedelHead then.Regards,Nicowww.nicokaan.nl (but no use trying till Feb 1st...)

Hello everyone! A couple of months ago I purchased the download version of the PIC767 and I love it. Anyone I had some problems with fs2002 and I had to reinstall it. When I tried to install the PIC767 again, I get the same error over and over again. It says "error installing IKernel.exe:(0X10000). Can anyone please help me with this. I love this plane and I would hate to waste it. Thanks Erik

Dear simming community,I am new in simming community and just bought the pic767 . Today i have tried to install it in fs2002 .In addition i download the patch for this 1.0 to 1.1 and tried to upgrade it . First of all i would like to inform that when upgrade it the win xp pro does not recognise under add remove programs! of win xp pro. It seems only the 1.0 version Secondly when starting fs2002 getting an error message fs2002 has detected a 3 party software that may not compatible with this version of flight simulator FILE: ADVDISPLAY.DLL AND B767W.DLLDO YOU WANT TO LOAD THIS SOFTWARE? CLICKING NO WILL DISABLE THIS SOFTWARE. Please if anyone knows about those errors…

Hi all. Perhaps this is of interest to some of you.http://www.boeing.com/commercial/aeromagaz..._09/flight.html

Hi guysI am holding the cash in hand to purchase the EFIS and EICAS system and the MCP from Aerosoft in Australia. Do any of you have it and would you recomend it?Charityflight's cockpit is being built and this seems to be the best way to go with the expansion slots for the encorders and switches. Any help we can get would be welcomed at this point. We don't want to buy something that is junk and we would have to scrap. I don't think this is however.

Hi, maybe someone knows the answer. I want to re-install FS2000 because of scenery trouble. Looks as if I had mislaid my PIC CD after a couple of years. PIC is nicely installed on my hard drive though. I seem to remember that during installation PIC modifies a number of FS2000 files. If that is the case, I wouldlike to know whichfolders/files are modified. I could then back them up and overwrite the new FS2000 files after re-install. Or won't it work like that? Any hint is greatly appreciated. Would hate to dig any further for the PIC disk (after 2 removals and 2 children...)Thanks in advance, Dieter :-beerchug

Hewo!Hope all had a good holiday, and shall soon have a happy New Year.Not sure how many old PIC associates of mine are still around. I left my nice happy civilian lifestyle to join the USAF this past April. All is nice and well with my new life. Finally able to get some time back on the sim. So, with that said. If anyone would be oh so kind to fill me in with the PIC 767 happenings of the past 8 months. . . anyone? Please?Thanks Guys! (dont have to comment about PIC w/ FS2004, as I have searched and read up.)