The Level D 767 | Wilco PIC 767 Forum

Can somebody tell me how to use the PIC Panel with a 757 flight model?Thanks

Hi again.I know there's another thread on this, but I wanted to create a new clean one specifically for PIC as the other one was too generic.So, what can Virtual Co-Pilot can do for your PIC flights?Not much actually... The panel already has most of the features that VCP has, so I had to disable them in VCP. And there are other features that do not work with PIC because of how the gauges are programmed.Let's first see what doesn't work with PIC.1. Upon selecting VCP from the adventure menu, and load it, you will see that the panel has been put in a rather strange stage! The Starters will be both in the GND position, FMC data lost etc. I don't know why this happens. Th…

Hi Everyone,I was just wondering how you go about using Wilcos PIC 767 panel with another aircraft model........can anyone point me in the right direction please. Some instructions on how to go about doing this and can you reccomend a better improved 767 /757 aircraft.....were can I go for this.Thanks.Paul.

I am using the PIC panel with an add-on aircraft (not a PIC 767). It seems I can only make it to FL250 before the plane begins to stall. So, I have to level off to increase speed. The plane is fully loaded with fuel too. Now, is it common for a plane to level off at a lower altitude, burn some fuel and then ascend to the cruise level?I can't believe that a fully loaded 767 cannot make it to FL350. Also, the panel indicates 105% of N1 on the engine gauges, but at full throttle, I can only get to 98%.

hi , anyone know where to find these? for the complete world. Henry. CYXT

Hey everyoneI am having trouble keeping the airplane going straight down the runway on takeoff. It pulls to the right everytime, so I have to apply left rudder continuously. I have the same problem after disconnecting the autopilot for landing. The problem is NOT evident on straight and level flight w/o autopilot.... I have checked the rudder trim (for takeoff). I have set FSIUPC. I have tried two different joysticks. No luck. I have the same problem with the POSKY 767, but only when using the PIC panel. I don't have this problem with any of my other airplanes.What am I missing???PS. I have been using MSFS forever, so I am getting really frustrated because I can't fi…

Hi, this is my first successful work on the 767PIC after an hour of tweaking and coffee and i wish to share it with all who need it here. Its basically a taxi light addon so you can taxi with taxi lights not landing ligts :) I know the switch is not in the correct position as opposed to 767s in real life, but i personally feel thats the only place a switch can smoothly blend into the panel, since I do not know not to make an invisible gauge i had to make a visible one and the result is this.Anyway Randy, this mod is not intended to compete with your excellent VFR views, I know your panel has taxi lights, but I couldnt find a link so I made mine. I hope you don't mind :) D…

I'm getting this on my annunciator on the take-off roll. I'm assuming the aircraft is out of trim.How do you determine the trim setting?

Thanks to all who helped me with getting the FMC in 767 PIC to work using FSBUILD. Now I apparently have another problem. Now that I can successfully transfer the information to the FMC from the flightplan, I am not sure how to use the flightplan in the FMC with FS2002. FS2002 seems to freeze up when after I load the flightplan into the FMC. Is there a tutorial anywhere that I can download and/or read? What I basically want to do is create a flightplan, put it into the FMC, and use the autopilot on 767 PIC to fly the plane once at cruising altitude. Thanks again for any help.

Will the 757 air file be included on all the 757's iFDG releases here shortly or just the Transavia livery?

Hi guys!!I would like to know if you have the same pain as me...Some products like PSS744,PSSA320 and PIC767, when you started engines and would like to enjoy the visual model, after switched back to the cockpit, the cockpit sound is a bit different, sounds like the balance is changed, or became a bit odd, it just different with the one i heard before i switched to the spot view....In my experience, in PSS A320, i could eliminate the difference by press "P" or "alt" then come back to the flight, But in PSS744 and PIC767, once i switched to the spot wiew then come back to the cockpit, the cockpit sound would never back to original unless i shut down all engines and stratin…

Hello, I have been reading this forum and wonder if the VCP product mentioned is available now? If so where can I obtain a copy?Thank You

Dears PIC Flyers, Hello. I would like to know if someone would be good to provide me info about this kind of on-line flights were we all get together. Thank youBest Regards,Bruno Francescoli.Miami, FL.

New version of Virtual Co-Pilot is about to be released.Now it works with PIC!The new version will be specifically for FS2002 and will not work with prior versions.Many of you may already know what I'm talking about, others maybe not. It's been around since the days of FS5. Do you want a co-pilot? But this is another type of co-pilot... You can't nag to him. Instead, he nags to you all the time!Virtual Co-Pilot is intended to make your flights more realistic by adding a complete airliner environment. This version of Virtual Co-Pilot features:* Complete set of custom sound files.* Parking brakes to set confirmation.* Cockpit Crew checklists compiled and recorded by actua…

I accidentally hit time accel for more than 4x, gettinghtet PIC dialog that this is not supported while the autopilot is engaged. Not a big deal , excpet for the fact that the dialog never goes away during the Flight sim session- I get a black boox that will not close or go away.Is there a fix for this other thatn 'don't do that'?Tim

Hey how about download versions of your products? I would have bought them already! Unfortunately where I live I'd have to order and wait. Most buyers are impulse buyers anyway and I think you'd rack up extra sales with downloadable versions.

I'm sorry , this is not the best place to say how sorry we in Israel are for what happaned to Columbia.We feel so bad for the Americans , who were so generose in giving an expensive place for our first Israeli astronaut ILAN RAMON.They were all such a lovely crew, each very proffesional (I know ILAN was the best of the best) and i'm sure they all were.We hope that after the investigation NASA will continue with its space planes and maybe will consider taking another Israeli.very very saduri

my first ever post on avsim. This is a big thanks to Randy Smith and all that made this part of flying the 76 just that bit more life like. I now feel that I can judge what should be seen when landing a peek at the instruments, see were you are go-ing pilot view.not the fish tank fs one that is about as real as flying with one eye shut.I thank you all.

I am new to 767 PIC. I bought the disk and loaded it up. Then I went and loaded the patch to make it work for 2002. Everything worked fine except I cannot "transfer" a FS2002 Flight Plan to the FMC in 767 PIC, even with the new patch. Can someone help?ThanksHarold

Where can I find it guys??ThanksClear skies, Happy landings!!!

Hi there,I have a scrollwheel on my Logitech keyboard. Does anybody know if and how to use this as a throttleThanksJAR

Anyone else noticed this?This morning I was entering a bunch of different routes into the FMS while on the ground. I had clicked on the KA spot on the FMS for direct keyboard entry into the FMS. However, I noticed that some keystrokes were being passed on to the PIC panel. For example, the K would cause warnings to recall and the X would cycle the #2 engine display modes. Further investigation, shows that this only happens after RC3.01 is started and the ADVdisp is in use. If I launch just FS then this is not a problem. Once I have started RC the problem continues even after RC is closed.I'm running RC on a client using Wide FS. The problem occurs with FSUIPC 2.95/…

Guys, my iFDG Gmax 757 (Transavia) will be out shortly and I have recreated the entire FDE for it. I spent countless hours on it and have it near perfect as much as I can, based on my QRH and own experience. It will feature:- accurate climb performance from SL to FL420 at all weights- accurate descent performance from FL420 to SL at all weights- accurate speedbrake characteristics- accurate acceleration and deceleration rates- idle thrust taxi at low weights and thrust required at higher weights, just like the real thing- accurate fuel flows for the entire flight regime except taxi (impossible for me to modify but oh well)She flies a very steady approach, even manual and …

Folks,I have downloaded real 767 flightplans and would like to convert them to fs2k2 or NAV format so that I can use Radar Contact on my flights. There used to be a utility called PIC2FS for FS2K. Does a similar utility exist to convert PIC flight plans to FS2K2? Many thanks in advance!

Hey guys,listen, is there a way to get the Top Of Descent marking on the display? for some reason I cant get it to show up. I get Top of Click but not TOD. Hope to hear from one of you soon. THanks in advance for all of your help!Nick Rockbrune