The FLY General Discussion Forum

You're the most prolific add-ons author of all time, all sims!!!!! Amazing!!!http://library.avsim.net/authorgraphpic.php Cheers!Pascal

Hello my frinds. I have a look all this hours at this site and I see a three 3 . I have some ponder and a looksee and things its a count up are something. Sorry if I should wear muzzles but I wonder some.Is Dauphin ready for me. IvorGo look and see it 3 http://www.f2fdesign.com Were is Ivor picture gone? Nice doggy though

So, here I is again with da same problem that I incured with the Beech D17 Staggerwing. I've downloaded the Beeech 1900D ver6 and upon switching aircraft I get the following error messageInvalid Guage Identifier (absw)File: cockmngr.cppLine 1506Now with the staggerwing there were some hidden .dlls that I found through your help, put them in the data folder and vois las the D17 Staggerwing worked great, but with the Beech 1900D ver6 there are no hidden .dlls in the unzipped folder and all the readme file says is that if you have the acdefaultfix.pod should be present in the aircraft folder as indicated belowInstallation:Simply replace the b1900.pod with the new B1900ver6.A…

Hi folks,Yesterday I started a new repaint.I hope it looks real enoughhttp://forums.avsim.net/user_files/76727.jpgthe real thinghttp://forums.avsim.net/user_files/76728.jpgpainted modelRegardsLeen (ROTW)

Thanks for tips guys, I figured it out with your help, I changed the resoluiton on the fly startup menu and it works fine now and the overhead and center console are now centered. On the default aircaft you can use the mouse or shift/arrow to position the panel but you can't on the overhead or the center console on the Saab. By the way are there any more aircraft for downloading in the files section, I've been scouring through and haven't found to many others yet for FlyII other than the D17 Staggerwing, DC9 and the Saab340Thanks againAllan

Alex and Roger et al,I decided to continue with a new thread, as the original was getting a little out of hand. Here's the latest on my test with Alex's fix for the pressurization system of the Malibu:1. The aircraft will now pressurize properly, pressurizing at the selected rate and maintaing the selected cabin altitude once reached. Panel presurization bypass knob on the panel is in (default) - Dump switch on overhead set to pressurize (default).2. If the Dump switch is depressed, she instantly depressurizes - turn it back on and she repressurizes.3. Pulling the Pressure bypass knob when climbing has no effect - the cabin continues to pressurize. Pulling it when level a…

Hi Leen could you email me please, I have an [email protected] Thanks mate, Steve.http://mysite.freeserve.com/ysomdesign/banner.jpg My Websitehttp://www.wrexhamspace.orghttp://www.cafeshops.com/wrexhamspace

I've being out for a while, but planing to come back. I'm introducing my new web site. http://jjlobo.sites.uol.com.br/index.htmThere is a small bug going into Brazilian HUB page but I'm working on that. Press NO twice and you'll be there.___ JJLobo ___55 11 37268158___ JJLobo ___55 11 37268158

First off, many thanks to Randall and Ken for thier help in getting my Beech Staggerwing problem fixed, once I opened the hidden files and placed the .dll in the proper folder it works great, thank you again.Now I've downloaded the Saab340 beta2 aircraft and have the .pod file in the aircraft folder and the .dll files in the module folder, it works, but and here comes the but, when I go to the overhead panel, I can only get the left part of it and it wont move with the mouse so I can center it. Also the center console with the throttles won't budge either, I can use the throttles fine but using the mouse I'm not able to move the window. Could I be missing a .dll file, is …

The Hawker needs a better centerpost...tony

I've noticed what I suspect is engine torque pulling this great PA-28 to the right constantly. I'm wondering if I've not set something correctly, b/c it seems like there is too much right tendancy, even when the engine is not at full power. I am learning to (really) fly in a PA-28, and I would love to increase the realism a bit more since I expect engine torque on takeoff, but not in cruise.-DK----David KohlFly! II v2.5.240Dell 8200 P4/1.8G, 1024MB RAM, Nvidia GF4 Ti4600 v52.16, WinXP Home Edition SP1.CH Pro Pedals and Yoke USB.

G'day Roger,Question if I might. Which video card are you using with the nVidia 45.23 drivers? I have a GeForce4 Ti 4200 128mb card, and when using Fly!2K, I cannot get an exterior view of the Learjet to show. Not sure if its the model or the video slots. Not sure if its my poor attempts on allocating video slots or not in the VCF file. Would you mind sharing your VCF values for comparison? Many thanks!!Also - have your feedback notes and getting them addressed as I can between work work and housework... ;-)Many Cheers!Ken Wood :-sun1http://www.avsim.com/hangar/fly/dfdg/bannernewkw.jpgGateway 700X; Intel P4 2.4GHz; 512MB RAM; NVIDIA Ti4200 4X AGP 128MB; SB Audigy; Thrus…

Hi to all,as I am regularly observing the FlightGear developers mailing list I found two links which might be of interest to developers or repainters of Boeing aircrafts:Aircraft walkaround pictures (some good, some bad, have a look)http://s96920072.onlinehome.us/walk.htmDFX files of nearly all Boeing aircraft for airport construction purposes: http://www.boeing.com/assocproducts/aircompat/3d_view.htmlExample: MD90 in TurboCAD 6.0:http://forums.avsim.net/user_files/76437.jpghttp://forums.avsim.net/user_files/76438.jpghttp://forums.avsim.net/user_files/76439.jpghttp://forums.avsim.net/user_files/76440.jpgMight helpRegardsGeorg (EDDW)

Hi I just uploaded my shapefiles for the south east of lower Austria. Please let me know if they work.Harald

HiI'm a newbie to avsim and the forums and after a couple of days of looking around and checking out the files section, I came across the Beech Staggerwing D17 download for FlyII and decided to add it to my aircraft. After downloading the zip file and unzipping I placed the .pod file in my aircraft folder and can see the aircraft on the the select aircraft menu, the problem I have is when I select the Beech the prompt tells me it's switching then the program shuts down and I get the following messageSubsystem is not registered (crT2)File: Subsystem.cppLine: 254The readme file says there is a .dll file that your supposed to unzip then place in the module folder, but no suc…

Enjoy!http://forums.avsim.net/user_files/76192.jpg Stevehttp://mysite.freeserve.com/ysomdesign/banner.jpg My Websitehttp://www.wrexhamspace.orghttp://www.cafeshops.com/wrexhamspace

I took same hours in a 737 full flight sim and trained the start procedure.After that I noticed that using the PMDG757 N2 is rising to quick.Is this a bug ?Can I amend a figure in the e.g. NGN file ?Thanks for your help.

I just uploaded some Cones.http://forums.avsim.net/user_files/75839.jpg Taxi carefully!Stevehttp://mysite.freeserve.com/ysomdesign/banner.jpg My Websitehttp://www.wrexhamspace.orghttp://www.cafeshops.com/wrexhamspace

G'day guys,One small step for the guru's one giant leap for Roger. :-jumpyThanks to Giorgio and Steve and to all on the forum who have helped me come to grips with 3dsMax. It's been a long haul but finally at last I am beginning to feel that there is light at the end of the tunnel. Giorgio, by following your pictorial tutorial I have finally achieved success in texturing a primative in 3dsMax. Thank you for creating such a great simple to follow tutorial.Many thanksCheers,Roger @YSSY

I have recently flown the Hawker and whenever I get above 7,000 ft. I ge the alarm of "unsafe cabin pressure".The Dump Valve is closed. After departure I turn on the right and left Main Air Valve.I don't have this problem in the other aircraft. So what am I doing wrong?

does anyone know how one might be able to "write" letters on the taxiways graphics that are view with the vector map. For taxxing purposes, having letters indicating the names of all taxiways would be great for online flying. The new SB will be so great that this feature would make taxiing easy. tony

is that the letters written on them are unreadable. I don't know if it's resolution or simply a question of creating a much larger sign.Any ideas? I would like to have readable signs while taxiing.tony

....By the ROTW Team....Available at Simvol .....soon

Check this out :-eekhttp://msnbc.msn.com/id/4970837/ Stevehttp://mysite.freeserve.com/ysomdesign/banner.jpg My Websitehttp://www.wrexhamspace.orghttp://www.cafeshops.com/wrexhamspace

Hi Guys,I'm back to the Fly! community after almost one year out. After Rich's death, I lost my interest with Flight Simulators and decided to give a break trying to dedicate more time with my band playing drums.Now I'm returning. I spent my last weekend installing almost EVERY addon developed for Fly! II and now everything is working VERY FINE in my computer (including my Brazilian Scenarios). I would like to know what I missed (aircrafts, addons, scenarios, etc.) in this time and where can I get them.It's nice to back home and see that some guys still are here. I'm very pleased to see that Fly! is still alive and have some future.BTW, I'm thinking to return and finish m…