The FLY General Discussion Forum

Should be available this afternoon or tonight.Pete

http://ftp.avsim.com/cgi-bin/dcforum/dcboa...rum=DCForumID47Rodger :-beerchug

Coming sometime next week.Pete

Here's the repaint of the Braathens 737 in their white rudder and national flag livery. I'll pod and post tomorrow.The engine graphic is a perfect match on the port side but is misaligned on the starboard side. This is beyond my control.Pete

When importing weather, do winds aloft aver get imported correctly? Every time I download or import weather, it seems that the winds aloft are the same direction & same speed at EVERY altitude. Is the accuracy of winds aloft something that fly2 is not capable of?ThanksSincely,Chris

:-(I've tried three different drivers now and I still get the lines. I am running Windows XP proffesional. I switched to direct X 7 and the lines went but it then I had blue textures in places and it was very very ruttery. 1fps maybeCould some one with XP and a Radeon 8500 please list their driver and direct X / setup.thank you again-Paul

RandallI'll need to do some Dex editing to slightly re-position London City for my new scenery so I've had a look at the Rwy 10/28 approaches.City is surround by buildings and therefore has 5.5deg ILS's. These are not currently implemented in Fly!2, the database shows 3deg.I've just changed the 'Glide Slope' settings in the ILS.POD to 5.5 but when I fly the approach I'm still getting a 3deg GS. The GS starts about D6.7 out but it should start at D3.4with the steeper angle. Can you check it and see what I'm doing wrong? Does Fly! support a 5.5deg GS?Docs can be found at http://www.ais.org.uk/uk_aip/aip/pdf/ad/EGLC.htmDaveT

Dear Sirs,I am running the latest version of FLY II with the Radeon 8500. Everything is super! But I'm getting lots of tiny black lines running horizontally across the screen. They transit the screen up and down. It's destroying the picture clarity. However, when I take screen shots to show people they dissappear!!Is it a fault with the monitor? But I've never had it with any other program.Many many thanksPaul

http://fly.simvol.org/images-forum/micro-sim_103.jpgWell done !All the best from the ROTW crewhttp://www.simvol.org/fly/avatars/logojp.gif

Hi all,I have a little problem with the Skyhawk. After applying Rob Young

All I have to do is zip her up and send off to the AVSIM server. Tomorrow morning I'll send her and you'll be able to Fly! her Friday afternoon.Pete

Good Day. Taking a break.Joe Ranos.Oshkosh Pictures From 2001 (Part 1) 78 Pics in Frames with 1mb in ThumbnailsHigh speed connection Recommended:http://home.attbi.com/~flypics1/FrameSet.htm.Oshkosh Pictures From 2001 (Part 2) 106 Pics in Frames with 1.5mb in ThumbnailsHigh speed connection recommended:http://home.attbi.com/~flypics2/FrameSet.htm.Picture Gallery of My Flight in a 1945 SNJ-6 on June 1st, 2002Joliet, Illinoishttp://home.attbi.com/~jranos/FrameSet.htm.http://home.attbi.com/~jranos/mysig.jpg http://avsim.com/hangar/air/bfu/logo70.gif

Hello allSeveral months ago Paul van Roy made some scenery fo the Netherlands.( for FLY2 )I understood that there where problems in continueing this project.Making scnenery is very complicated and I do not want to disturb orhurry Paul , so I am putting this question here.Can we have more Dutch scenery in the future??GreetsLeen de JagerEHRD:-wave

Flying with Fly I often found the need to adjust rudder trim to keep my aircraft in straight and level flight (without using the A/P). Switching between cockpit views is not always manageable when I have to keep my eyes on instruments to cross-check the trim settings and the wings position. (Not to mention the need to release the joystick and operate the trim wheel with mouse!)There is no such thing in the "Controls" menu like Rudder Trim, so I cannot assign it to joystick buttons. Does anybody have any solution????ThanksNight Owl

Cleaning out software cupboard when right at the back covered in dust I found my copy of the Original Fly!. Tried installing it but had no luck> When I pressed the start icon it just came up with an irrecoverable error report. A couple of questions: Will Fly! run under XP? If it can where can I now find the patches that came out for the first release?. I see no sign of them at iflytri - none for Fly 2k2 either for that matter. Do they still exist?Clyde WilliamsLevin NZAthelon 2100+Soltem SL-75DRV4 Mainboard768MB DDR RAMGe 4Ti 4400 128 mb

Saw the term N 3 on a video last night. What is that?Sincerely,Chris

No, not of the personal type, but of a more "simulated" nature. I recently reformatted my PC and installed WinXP PRO. Not wanting to lose my hours of work with Terrascene and Terramodels, I copied over my data, scenery, art, modules, aircraft, taxiways, and taxiway folder. After getting WinXP installed, then installing Fly!II, addnig the super patch thing, Globalupdate patch, the .230 exe file, Paris, SanFran, NYC, I thought I might just be able to drop my saved "data" directory, "scenery" etc in and have Fly!II just as it was. Well, I was wrong. I knew I was asking a bit much from it. I have all my Terrascene stuff working, but Fly!II no longer likes my Terramodels…

I'm getting sorted now, but after about 40mins into a flight when I go to the outside view Fly and my whole PC crashes. Restart button is the only way out. I've also edited the fly and render files as I've been told under the new flyers section.Also, I'm getting lots of black lines the screen.Could someone help me again? BTW - C4TO is amazing!-Paul :-)

When I (would) start flying with FLY!, it freezes 9 times out of 10, when I press the big red FLY button. I have AMDk-6/233 with 112MB RAM, S3 Trio 3D/2x 8MB Video (PCI) and 3dfx Vodoo II 12MB accelerator card. The M/B is AMptron PM9400. Normally there is a change in screen resolution when it starts up, from 800x600 to 640x480. But in most of the cases it is just an anoying frozen picture of flight planning screen, that can only be eliminated by ctr+alt+del.Anyone any idea?Night Owl

What does it mean when the wind component for a flight is 75mph (headwind)? Is the plane actually flying through 75mph winds? How is the wind component calculated?Sincerely,Chris

http://ftp.avsim.com/cgi-bin/dcforum/dcboa...rum=DCForumID47

Is anyone working on prop airliners like the DC-4/6/7 series for Fly?Just curious....

Using the TAB I get readouts at the top of the screen. But none of them are frame rates.Any idea's [email protected]

Just re-installed the amazing Fly II after my system update a long time ago. I just wondered if you guys could tell me the best Freeware to get for Fly II.Many Thanks-Paul

How do you pod a scenery .SOxx file, or do i need to pod that file to upload that the fly!II editor gives in the data folder So that others may enjoy as their own scenery. Just wanted to know, now that harold krafts fileglidersv2 pod is in my editor and it does work. Jeff Akins