The FLY General Discussion Forum

If you've downloaded the Manchester parts of Paul Brooks' 'UK North West VFR photo scenery then you'll need a chart like the CAA 2171AB '1/2 mil' sheet or the Jeppeson equivalent. However a cheaper alternative is to download from http://www.caa.co.uk/docs/299/Manchester.pdfThis is one of the new 'On Track CAA' pdf's, aimed at stopping VFR pilots from infringing controlled airspace in 'difficult areas'.the document is 13 pages, the first page being a good 'sectional map' of the Manchester/Liverpool TMA's which includes the airfields of Manchester EGCC/Woodford/Barton and Liverpool.The next pages are pictures of the associated 'visual reporting points'. You can ignore print…

Hallo all,This morning I got a request from Yves Pebayle (ROTW)I think this is what he wanted.N`est ce pas Yves?Regards

Anybody from this community lives in Singapore? I am looking for an address where I could get yoke and pedals to install for the Fly! program. Thank youRakham/Java-Indonesia

I couldn't find this in the AVSIM libraries.Thanks for any information.Bruce.

Here's a nice package in the MS library for FS Import. It's called IAH2001.zip and it includes nice modeling for both IAH and downtown Houston.

Does anyone know if further development is onging with Squawk Box. I have heard from someone a while ago of a later version in the works. Anyone have any further on this. I guess I'm going to dust SB off and move to that enviroment ver. Tri's Multiplayer server.

Is Danny Vickers still out there?VinPMDGwww.precisionmanuals.comhttp://www.vinscimone.com/dancnkid.gif

This is the ENSO airport for fs2002.Enjoy the pics!!http://home.online.no/~johsvenn/artimages/div/stord5.jpghttp://home.online.no/~johsvenn/artimages/div/stord6.jpghttp://home.online.no/~johsvenn/artimages/div/stord7.jpghttp://home.online.no/~johsvenn/artimages/div/stord8.jpghttp://home.online.no/~johsvenn/artimages/div/stord9.jpgJohnny"I'LL BE BACK"[div align=center]http://www.avsim.com/hangar/fly/josve/zone.jpg ][/div

Hi folks,Today a learned a lot about importing metar.These beautiful sky was produced by FLY2 after importing metar withInfometar.There was wind ,rain now and then and a beautyful cloud layer.I have seen this before ,exactly the same, then from a real plane.Today I could not tell the difference.Just three screenshotsGreets

I feel I'm addicted to flying in lousy weather at dusk. Here are some shots from a short hop between LaGuardia and Essex County in the Cessna 172 Trainer. Weather is 17 Nov 2002 23z (18:00 in New York).-DK----David KohlFly! II v230Dell 8200 P4/1.8G, 1024MB RAM, Nvidia GF4 Ti4600 v30.82, WinXP Home Edition.CH Pro Pedals and Yoke USB.

I just ask the question because I see several posts unchanged for the answers as well as the views.I have posted a message concerning printing troubles, I opened it several times but the counting stays at 0 and this goes for other messages as well. I have tried with 3 distincts PC today, and I have the same results. Thanks for your kind attention.Rakham

If I delete this file, will Fly build a new at the next start up ?Regard

The TWA 757-200 repaint of PMDG's 757-200 for Fly! II is available from the AVSIM server. I didn't have any time last night to work on the TWA St.Louis Rams or Trans World/American Airlines Intrim liveries and didn't want to delay the TWA any longer. The TWA/Rams and TWA/AA liveries will be posted as soon as possible.Pete

Felt like doing a pair.Pete

Have installed Fly! and Fly! II using Win98 compatibility mode under WindowsXP. Other planes fly normally, but the C172 just won't lift off at normal flying speeds-- get stall warning horn at 70-80 kts, and no movement on vertical speed indicator.Both programs work fine on another cptr under Win98.After the WinXP install, I applied patch (v.1.01.87) to Fly!, and the patch (v.2.10) to Fly!II. (Before the installs, I removed the Fly.ini and Render.ini files from both, pasting them back in after install.)Indications are that I'm getting full power at full throttle.Any ideas? Thanks --Larry H

I am trying to print the wonderful job of Basil Copeland "A trip to the wine country" but I can not get it fit in any page setup:-(I tried Landscape, portrait, I played with the margins etc etc but always it ends up with half pictures missing, specially at the bottom pages.I work with Win XP Pro and the printer is an Epson Stylus Photo 720.There is a little software addon that can manage the setups but I can not recall the name and the place to download it.Anybody could help me?Thanks and regardsRakham

Hello all:Last evening, in an attempt to fly around the French countryside, I received the following three error messages, when attempting to fly into or out of the three airports associated with Paris:Can't load Texture DATAd00116700B21F1E4.RAW, DATAd00116700b220244.RAW, DATA00116700B21B5B4.RAW.Can someone email me the above files or point me to a place whereby I can obtain the missing files.Any help would be appreciated. Thanks in advance!The files can be emailed to me at [email protected]

After work on the TWA St.Louis Rams and TWA/American Intrim are completed this beaut will be next.Pete

Is it possible to replace the default airport terminals in Fly2 and how? thanks.chrisrpll

I did it!Tks Tonyc your info was really useful. I have one week trying to make this work finally is done, although still some problems that maybe can be fix in the future by Padriac, I found some object disappear depend of the view and of 7 scenery that I converted last night only two were really alignment to the taxiway others complete out of area, but no complain at all. Great utility for Fly2.This is what I did. This is only for people who has FS2002 or 2000 installed in their machine.-Just make sure that the add on scenery folder is in the fs2002 or other FS -Add new folder in the Add Scenery folder with the name of the airport. We gonna call this scenery Miamiexampl…

Just Wondering , Are you Still Working on the Repaint Tutorial????? Jeff Akinsaka: [email protected]:-hmmm

VFR photo scenery of the UK is getting a 'lot of press' over in the 'other sim',with the release of the first amazing 'Visual Flight VFR scenery CD'. However we have some more available for Fly! very soon as I'm uploading Paul Brooks 'UK North West' scenery in 4 parts.There is nothing in my view like navigating your 'GA flight sim aircraft' over the real countryside below. It's why I first fell in love with this sim (thanks Todd Klaus for Terrascene) and now we can have the same in the UK, not just from ,accurately placed textures' but from real photos.Get you 'UK sheet 2171 Northern England' map out and find that elusive 'Manchester Low-Level Corridor' into Manchester Ai…

Including Pete's American 757 Repaint... :)http://ftp.avsim.com/dcforum/User_files/3dd94b912de9032a.jpghttp://ftp.avsim.com/dcforum/User_files/3dd94cce35704bb4.jpghttp://ftp.avsim.com/dcforum/User_files/3dd94d8238f9a68b.jpgVinPMDGwww.precisionmanuals.comhttp://www.vinscimone.com/dancnkid.gif

Hello everybody.Some old files showed up of my Bell407el2.For thoseinterested I uploaded it today.It's a further development of my earlier Bell407 el (electronic displays)This one with working cycliccentering light.Only light up when cyclic stick is in a position farout from center.Also possible to run engine at ground idle(bearly)Thenit's easier to perform autorotations without shutting down the engine.It's not perfect,but IMO better than default.As you can see from pic.the CC light is on during a bank.Should be avoided in real life.Hopefully it works on your PC's too :) Thanks to the ROTW team for thedatafiles needed for the light to work.Jan

I've tried using FS-Import and tried following the steps in the Readme file but I can't generate or convert a single scenery. Perhaps someone can make a step-by step tutorial (with screenshots)for both MSFS & non-MSFS owners. Thanks.chrisrpll