MS FSX | FSX-SE Forum

I have been looking for this answer and can't seem to find it. I have been having great fun installing planes/repaints into UT2 but there are a couple airline packages I would like to add from WOAI into UT2. How do I go about installing these WOAI packages into UT2? I can't seem to find a guide or anything that explains the entire process. I saw a process about how to get the schedules imported but I saw nothing about installing the planes or what I need to change in UT2 to make it work. I just don't want to screw up UT2 by replacing the default UT2 airlines with these packages. Thank you in advance. Happy Holidays!!

hey everyone hoping someone can help me with a Kai Tak Flight plan (Flytampa) i wanna fly the pmdg 777 i have already updated the Nav data in the 777 to accept and reconize the VHHX however i get no stars. i realize its a visual approach but i'm not 100% there with charts i also use PFPX to plan fights and AivlaSofts EFB either of those programs will flight plan to VHHX any tips or help would be great

Hello, i'm new and i don't know that this is right section... I have a problem with this file. I have downloaded Blue UI by Jiri Soukup, and that's the problem: What is happening? Sorry for bad English.

trying to land at TNCM tonight and the wind was so bad it hovered my plane when trying to land ha it bounced me down hard and wrecked my plane i got a laugh out of it it also made the clouds roll by super fast and the water is going mad this is tonight/today anyone else fly in it JHo

A2A KAP140 I can turn the AP off, and fly an interception to the GPS track, but it still will not pick up the proper heading? Hope the screenie shows.

After installing REX4 Direct. I don't use REX Essential weather...only the texture engine..so..can I clean up my hard drive and fully delete REX E, and only now use REX4? Is it safe to fully delete REX E from off of your hard drive? ---------------------------------------------------------------------------------------------------------------------------------------------------------

Merry Christmas, I have been having trouble with wind shifts on descent. Just before the flight, I downloaded the latest beta. Today I flew into KJFK. Everything was find but at about 17,000, I had a sfift from 214/56 to 146/52. I noticed that my recovery altitude was set to 17,000. My past troubles were many shifts on the way down but this flight it was only one. I also noticed on final approach, it finally nailed the reported winds on short final. It was pretty good. Is there anything else I can do to eliminate the last single shift I experienced today? Brad

My weather station has just recorded its lowest pressure since records began in May 2009. Currently 964.4hPa or 28.48" if you prefer. The transition from QNH to Standard and back again should make for some interesting flights! :biggrin:

I just came off a three hour same-loaded flight plan in both weather injectors, and my personal opinion on the matter is... -------------------------------------------------------------------------------------------------------------------------- They both have great strengths, they have different features, and how they arrive at giving you custom atmospherics. They both DO NOT duplicate the exact same rendered atmospheric scenario. No sir. Not with an apples to apples loaded flight plan comparison of the sky being rendered and atmospheric effects enacting upon the flight path, and air frame. They give you quantitatively, different output and end results. I am…

Since switching to ASN I haven't been totally happy with my texture theme and am looking for recommendations on any rex od theme that people are enjoying with ASN.

Hi folks Could anyone feel this: I use PFPX to planning. Also I use REX ESS + OVD with the FS GLOBAL REAL WEATHER as a weather engine (I don't like REX weather engine). I need to plan my flight with thus programs and I cannot know from what point can I began. Also I need to know what the most accurate choice in what kind of live weather to it use with PFPX, historical , static or update the weather each 5 minutes. also how to know what the active runways for the departure and arrival depending on the wind direction, speed etc.... Also where csn I found the metars which downloaded by fs global real weather (note : fs global weather not contain a META…

I've recently run into a lot of issues trying to use EZdock and am hoping someone has a solution. I recently installed Ezdock and upgraded to v 1.17. I always run the ezca.exe before I start FSX. I have several issues going on: 1. EZCA will not open in full screen mode, only in windowed mode. 2. Once open in widowed mode, it does not cycle through default views, and it pauses FSX. I unchecked pause on task in FSX settings and it still does it. 3. Center mouse button does nothing. I have uninstalled and re-installed several times starting with v 1.15 to 1.16, and finally v 1.17. Still no change. I went into FSX and deleted all te button assignments arrows, …

I want to test something and for that I have to add various things to the Scenery Library. Now I know that to get rid of whatever you added, you simply have to remove them from the library. But I was wondering if that really completely removes every possible trace or not. Which files are actually changed when you add something to the Scenery Library? Really only the Scenery.cfg? I'd like to make a backup of everyt affected file before I add anything!

When I try to set up live camera views in the standard captain's seat VC view in this plane the panel disappears ... Alan

I have the saitek pro flight yoke system with 2 seperate throttle units. I can't for the life of me get the throttle calibrated properly with FSUIPC. I have tried the send to FSUIPC calibration and I have tried send to normal fs axis. There is no subtle thrust increase. I pretty much go from idle to 108 and then to 300 rpm in a very little movement of my throttles. It is nearly impossible to taxi with the amount of thrust and inaccurate throttle movement. It shows the throttles just barely moving but I can move it about a 1/8 of an inch and get no increase in RPM and then move another 1/8 in and go from 100 to 300 like that. Someone please help.

Hello. Have a stupid problem. When i change the setings in the control system for buttons and key command it just go back to normal after restart FSX acc... Regards Klint

After glancing at the QW $20 sale on their B752, and realizing the only tube I have that's not outdated is the B738, I think I'd like to fly something faster than the NGX. But it needs to have Navigraph support, which rules out the F18 Superbug I already own. Since we don't have any updated bizjets (I also own the C750) which would easily cruise mid mach .8 I am starting to think harder and consider the PMDG B772. But golly, it's almost $90. Which is a lot to me because this tube thing isn't normally my type of flying. But the max cruise is around mach .89 - that's REALLY fast! When I fly it's online and I simulate being a bzillionaire with a private aircraft that…

Hey everyone, Happy holidays to all. I just did a short hop from (taxi2gate) KMCO to (FSDT) KFLL. Upon landing at KFLL, I noticed all of the scenery buildings and such have gone missing. When I looked at it in the add on manager, it says my FSDT scenery is activated, but outdated. It just so happens that I just reinstalled my QW757 on this machine and it installed a BGXman file ( I think ) which I think caused and older version of the add on manager to be installed??? This is the only scenery thus far I have seen issue with. I also just installed Razbams MetrolinerIII the other day. Thats another story..... It's been so long since I've had this issue, I forget how…

Odd problem that has only started appearing over the past few weeks. When I land in a larger aircraft (ie BAC 1-11, QW 146 etc) despite landing at the correct speed and flare they have a habit of rolling from side to side, sometimes quite violently. I switched off ASN thinking that was the cause but even with nil weather I am still get the same problem with bigger jets. Removed the LUA friction entry from FSUIPC thinking that may have something to do with it but same problem. Anyone have any ideas what's up? Thanks Adam

Last few days I have been noticing the scenery while I am on the ground is shaking or flickering a bit. It's much more noticeable in any view except VC where it seems to be basically nothing. Any ideas as to what can cause this? It's mostly noticeable with terminal buildings as well as trees.

SPECS i7 2600 3.5 gtx550 ti 8gb ddr3 PLANE USED AIRBUS X EXTENDED Recently was testing PC in frankfurt with the aerosoft eddf scenery and i was looking for ways to increase fps around frankfurt with the aerosoft scenery I get around 17-24 FPS so i was curious what fps i would get with defualt fsx scenery at EDDF Frankfurt........ turns out I get exact same FPS maybe 1 or 2 more (MAYBE) I want to know how is that possible and what must be the problem .... How can i recieve same fps at default Eddf then in Aerosoft eddf any other scenery i have like FOR INSTANCE I TESTED aerosoft Barcelona 25- 30 fps on my rig with airbus x and when i…

ASN Warning ... If you have ASN installed and wish to use the OpusFSX Live Weather Engine (for realism purposes for instance) then please remember to remove and disable the ASN EXE and DLL files. This will also require removing the any entries within the simulator's EXE.xml and DLL.xml files. The ASN DLL in particular is an invasive and proactive library. It will actively prevent other weather engines from functioning correctly and being able to control all aspects of the weather. For instance, it will block all precipitation so you will not see any rain or snow falling. Contrary to popular belief you DO see precipitation 'outside' of cloud, any RW pilot w…

Because I have to have either Service Pack 1, Service Pack 2, or Acceleration installed, do I need to play the PMDG 737 NGX on the Acceleration Pack, or can I just run it on regular FSX, or deluxe edition?

Where did the "Milviz 407 on short final" thread go? Why not just lock it with an explanation from the moderator why it was locked? -Damien

Dear admin, You may remove this double post, just got "Service is unavailable message" and reposted. Dear All Take a look at the screenshot. It just turned like that without any reason I can recall. Tried rebuilding shaders, all different settings in Catalyst control centre, even uninstall and reinstall. I have only seen similar thing with low texture filtering but if it is set to maximum, there is no difference. During day, everything is fine. What kind of sorcery will fix it? Best Regards, and merry christmas!