MS FSX | FSX-SE Forum

Awhile back someone posted a preview of a PC-12 he is working on. He stated that if he had good 3-views of the 328, he would develop one. I promised to look for my copies that I had stowed away somewhere. For the love of me, I can not remember who I spoke to.Anyway, I found the 3-views (328 prop and 328 jet). If you remember our discussion post to this message and I will go ahead and scan them. Let me know what format you need, etc. I have Photoshop 4, so I should be able to get you quality scans. If anyone else is interested feel free to post and I'll get you copies also.BTW, I have access to several volumes of Jane's All the Worlds Aircraft, which usually has excellent …

...how do you start the darn thing??? :-zhelp *:-* :-roll (-: ThanksShez

I go into virtual cockpit mode and try to "walk" backwards by uising Ctrl+enter to go to the cabin but it doesnt let me go all of the way back. It stops a few feet in front of the engine. Do I need to change a setting to be able to get back into the cabin? Thanks.

Does anybody know where I can download this plane in Aeroflot livery? Been searching high and low (no pun :-) ) at Avsim and flightsim.com, but I cannot seem to find it.Thanks! :D

I'm confused whether the VHHH HK airport in FS2k2 is kaitak or the new chak lap kok? Some says it's Kaitak, some says chak lap (well in FS2k2 it's writen as kaitak). So which one is really is the VHHH in FS2k2? But I think both can not co-exist since it use the same ICAO code VHHH?

Hi all,I was checking out my MOBO's manual(ASUS P3B-F) and read the following: "For the the system CPU to operate at 100mhz, use only PC100-compliant DIMMs. When this motherboard operates at 100mhz, most system WILL NOT EVEN BOOT if non-compliant modules are used"Does this mean that I would not be able to use PC-133 mhz CAS2 DIMM modules along with this motherboard or is there an option for... who knows... some "tweaking"???Thanks,Jean.

I don't know after the installation of which addon, but now the superior part of my panels disappears behind the main cockpit view window. Could someone suggest a fix for this?TIA

If I wanted the Cessna 172 to perform like a 160hp N instead of a 180hp SP , do I have to do anything special, or can I simply adjust the following entry in the aircraft.cfg?{piston_engine}power_scalar=0.88

I notice that very tall radio towers which extend to around 2,000 ft agl do not display a red blinking light on top at night. An example of this may be found just north of Houston Southwest Airport (KAXH). Can some of you verify this and provide feedback.Is there any 3rd party utility that can provide the FS2002 radio towers such as these with white strobes instead of the single red light on top?Many thanks for your time and response!Gene LacyVRS (Virtual Skunk Retired)

How many are there? All I can think of is PSS 747 and PIC 767.. we need more. ):Drew Anderson- [email protected]

Big Bummer. I have tried and tried to get this program to work for me but I have been whipped like a puppy. To bad to, this looked like a great one to use. I just can not figure out what is wrong. All the airports are there, the planes, the plans, the tower freqs. Tried all the tips everyone gave me but to no avail. Oh well I guess no GA/AI for me. I'm not about to start putting it all in by one at a time. Excuse me while I go cry in a corner and kick the dirt.http://www3.telus.net/dport1/Radar_small.gifRC3 - Just gotta' have it!http://www3.telus.net/dport1/Radar_small.gifhttp://www3.telus.net/dport1/dansig.jpg

A favourite flight of mine is from Orly, Paris to Heathrow, London.My UK scenery is satisfyingly detailed but the default Western France FS2002 scenery that I fly over is uninteresting.Any suggestions for improving it? Please

hello, I just downloaded the latest riva turner hoping to unleash my Abit Siluro GF2MX400 (TV out) power. The problem is I don't know where to start. I've try force antiaiasing setting to 1x2 and mann... FS2002 does look much better, unfortunately it down my framerate considerably so any advice on this? I heard this program can unlock some of the undocument feature of the GF card but I don't know what it is.

Anybody know anything about Activesky?? I downloaded it the other day and it's great...except>>> Whenever I go through a cloud layer my airspeed indicator starts whirling and after a few moments becomes disabled. This has happened with two different aircraft. I've also had some problems with ATC since installing it. I will get IFR clearance that states a certain runway and then when I ask for taxi clearance, I get a different runway instruction. This never happened to me before installing Activesky.Thanks in advance for any info.

Does anybody know how to convert AIRAC data into BGL files?The planner I'm using draws its navaids and routs from the BGL files in FS, these do not always correspond with the data i have in various FMCs which are based on AIRAC files; so I find it difficult sometimes to program routs to those FMCs and often stumbe upon "not in database" , "not found" or "mismatch" messages.Oh, yes, I am otherwise very happy with my planner(SFP) as it has no influence on sim performance (the dll one does !) so i'd like to keep using it.ThanksHA5

Does anyone know of any good repaints for the FSD Cheyenne 400LS??

EDIT: I have found it on the other flightsim website. Can anyone advise if v2.3 is the latest?Can someone please tell me how to find this on AVSIM?!?Their site is down for the past few days and I had to reinstall FS2002 and need to download this. I have used every possible search phrase (FSW, FSW Group, Sky World, Clouds, Chris Willis) and cannot find it still.... heeelppppp

Looking for a small or midsize jet with good flight characteristics.Thanks

Hi,I upgrade my system with a new Radeon 9500 using the ATI driver 6.13.10.6218.If I start playing with the Smothvision II, changing the default setting (AA and AS) the FS2002 looks great (except the letters in red displaying, for example, the frames), but if I change from the FS2002 (minimizing) to another application and back to the FS2002 the system reboots. I always use the FS2002 with Full Screen and 1024X768.My system:System board VIA PE11-ECP4 2.4 533RAM 512 DDR 233Grafic card ATI Radeon 9500HD Seagate ST380023AAny help is welcome. I

Hi All,Can anyone point me to a polynesian airlines 737 Gmax please, searchedAvsim and others but so far no luck. Thanks in advance.CheersJulian

HI first I would like to say thanks to all people who downloaded my scenery and also sent me kindly emails these promote me to work better and better and design more add-on's for flightsimmers.When I started to design the scenery i didn't belive that it will have more than 6000 download just in avsim.designing the scenery took me about 6 months and also many friends helped me for this project.Again thank you for your incredible download.have a nice landing at mehrabadsincerely yourstouradg moarassaeitouradg.8m.com

Can anyone tell me what processes are safe to end prior to running FS2K2?I am just curious to know what the minimum process requirements are (ctrl+Alt+Del) to run flight sim while still running addons like FSMeteo.Cheers!Simpilot

Hi everyone,I was expecting to buy a new video card and most certanly if I do it will be the GeForce 4(not the MX one). My question is, in terms of FPS, is there really a difference between the GForce 4 and the GeForce 2??? I'm using Fs2002.My sys:P3 700mhz, FSB100mhz128mb RAM PC100GeForce 2 GTS 32mb11.5Gb HD 90Mb WIN Swap fileThanks,Jean.

I've read that during the early days of airliners radionavigation was accomplished through a two-tone radio signal that became continuous when the plane was oncourse. It would be REALLY cool to replicate that (using the VORs that are in the sim already, naturally). Could it be done??? Anyone know when this was phased out?David

For figuring out what time to begin your descent I have been using the windows calculator. GSx101.3=FPM/5280=miles per minute take that and the time it will take to decend from altitude to desired altitude=range in miles from the airport to begin the descent (make sense to anyone?) Is there another way to figure this out, or am I doing it right.