MS FSX | FSX-SE Forum

Hello,Following the advice of a few people I modified the AFCAD2 file for my home airport (KPBI) using the wonderful AFCAD program- really well designed and easy to use!Unfortunately, after adding TONS of GA parking ramps (actually they were already there, I just modified existing parking to become GA ramps) I still get no GA planes parked or landing.I know there's lots of GA at other airports nearby (can see via ShiftW as I cycle through), but can't figure out what's going wrong at KPBI. I use Ultimate TRaffic, but as I mentioned there seems to be plenty of GA at other airports so I don't think that program is causing the problem.Do I need to modifiy some flightplans or …

Hi.... Does anyone have an english clue as to how to install the FS CAMERA ? I read that most people like it but don't have any idea how to install Sorry to say I don't read Italian ! But am One !ThanksTONY

Below is an email that I sent to Tell_FS@MS with what I consider a great idea for our beloved sim. If you would take the time to read it and post a reply to this thread your thoughts or a simple ya or na it would be greatly thanked. Additionally if you really like the idea let the MS FS team know by sending them an email stating your likes of this idea in your own words. Hopefully some authors and those who attend the sim convention can keep it in mind and relay it to those who can make it happen. The best thing about this idea is that it will allow UT to become interactive in a new way creating a very real commerical environment. With UT being based on real airlines…

The package is now complete and was uploaded to here moments ago. Not sure how long it takes to show in the NEW section. Zips needed are NEMAI1, NEMAI2, NEMAI3 AND NEMAI4. The first 3 are the skin packs and the 4th is the afcad files and traffic bgl.http://www.x-plane.org/users/topgun/NEANGB.../NEMAIGroup.jpg http://www.x-plane.org/users/topgun/NEANGBases/nemai_2.jpghttp://www.x-plane.org/users/topgun/NEANGBases/nemai-3.jpghttp://www.x-plane.org/users/topgun/NEANGBases/nemai_4.jpghttp://www.x-plane.org/users/topgun/NEANGBases/nemai_6.jpghttp://www.x-plane.org/users/topgun/NEANGBases/nemai_5.jpghttp://www.x-plane.org/users/topgun/NEANGBases/nemai_7.jpghttp://www.x-plane.or…

I love the SoCal MegaScenery but it takes about five minutes to load on my defragged P4 2.66 with 1GB RAM. 7200 RPM hard drive. Frame rate slider set to unlimited as recommended. Is this typical? It's gotten to the point that I often fly out of the area to avoid loading it.Thanks

Hi friends, i want to give a run at that wonderful lady. Just got RAF metal version but i'd like to get also the USAAF original grey/green livery. Is this livery payware? In that case i'll be happy to pay for my CD; but, if it's free, where can i get it?Thanks in avance for helping.Luigi ;-)

What exactly do we mean when we say "CTD"? Crash To Desktop, I know, but are there different types of CTD's? I've experienced the Black Screen of Death (which I consider to be a CTD of sorts because that's where I end up) with the option to restart FS and report to MS or not. I've also run into situations where effects files create a conflict on my system and I find myself immediately looking at the desktop with no FS icon in the taskbar or HDD activity. BTW, I simply moved the effects files out of the Effects folder, and all was well again. I've had my entire system freeze before, requiring a pensive finger to the power button and a reboot. I will only breathe the …

Hello Dear People, I have just had a rude shock, after what I thought was the best flight I have made in a long time.Details:SIM: FS2002 Pro, with ActiveSky wxRE 1.91, and FS real time. In addition to this, I have just implemented, for the first time ever, today WideFS 5.4, which interfaces with FSUIPC 2.975.I departed from KSMO, for KOAK. Everything was fine prior to, and at take-off. After leaving the ground, I noticed that the frame rates were very good (19.5 FPS average; I have it limited to 20FPS)all through the flight, and I was very pleased. I figured that it was because I had moved wxRE and FSRealtime to the WideFS client.When I was on the glide slope into 27R at…

I would appreciate if anyone who might still be using a GeForce2 MX 400 card could please tell me what you have found to be the most stable driver for FS2002 or FS9. I am currently using the nVidea 4.13.01.2185 driver. Thanks

for those experiencing problems with Voice Buddy: after 3 weeks of trial and error i've had a flight with a smile at the end! #1 DON

A while back I purchased FsNavigator and have used it for all my flight planning. One thing that I don't like is the amount of time required to try and set up a semi-realistic flightplans. I enter the origin and destination airports then wade through all the SID's and STAR's to find ones which get me to my destinations in the shortest amount of distance. This, of course, is highly unrealistic. I have tried the autoroute feature to try and save myself time and it seems to make routes similar to what I would make myself but again, I don't know that they are highly realistic routes.So, having said all that, my question is can FsBuild produce or at least ease the effort in p…

HiI recently flew a flight using downloaded real weather conditions. Now however, whenever i fly without real weather, each time the local weather updates, it always sets itself to unlimited visibility - with the expected drop in performance. Has anyone any ideas how to get over this without having to manually reset the visiblity each time the local weather updates.Many thanksGary

In the new downloads section (not yet on the main page) there is a new utility named Game XP FPS Fix that claims to improve FPS for FS9. Has anyone tried it? Did you get a real boost of FPS if so by how much? Is there any side effects?Nick

Just d/l this .exe - see the new files on Avsim Home page under FS2004 Utilities,"Game XP FPS fix.Having read thru both the "blurb" on the Avsim page and also the "readme",it just seems a little to good to be trueHas anyone tried it out yet? if so,- with what results?Dave

Has anyone ever been on the BYP3 arrival to DFW and seen a large area in the ground that looks like a giant black hole (close to TXK)? Apparently this is a bug, I was curious if there were any others like it around.

Hello.CTWD is looking for someone to design us and maintain a website.We are also looking for aircraft Modelers.If Anyone is interested You can e-mail me and/or contact me via MSN at [email protected] WesterlundVice President CTWD

I hope that PSS can produce a 747 before someone else beats them to it.

I'm wondering how eDimensional's Voice buddy product is going to work with ATC - this is where I would most want to see voice commands in FS9. Anyone have any idea? I would also be interested in whether anyone has gotten a reliable system for interacting with FS9's atc using some of the other voice programs out there such as game commander, or any of the freewares.Thanks!sg

Good evening All, I found a Fix in the wrong location(The FAF for ILS 15 KHYA,KENAD) It is on the runway centerline, but 5 miles to close to the runway. Where do I find the text file in CF9 witjh the lat/lon entry, in order to fix this? Thank's in advance!http://forums.avsim.net/user_files/56769.jpghttp://forums.avsim.net/user_files/56770.jpghttp://forums.avsim.net/user_files/56771.jpghttp://forums.avsim.net/user_files/56772.jpg

I am using FS2004 and FSflightMax. FSFlightMax is not seeing my FS2004 flight plans. I think I have to manual move my "*.pln" files into FSFlightMax. Is this correct? Where (which directory) do I move them into? And do I need to change the file extension name?Bottom line is I want to overlay the flight plan onto the sectional chart, as viewed in FSFlightMax.Thanks,JIm B

HelloCan anyone tell me if this product has an autopilot included in the d/l? In the real world you would find few (if any) autopilots on any Cessna 150/152's, but I need one for virtual instructional use.ThanksEd

Has anyone been able to assign both rotaries yet? The game will accept rotary 2 but not rotary1. I get no result when I assign the elevator trim to the #1 rotary. It will work when elevator assigned to #2 rotary. I took a look in the cfg file but got even more confused. There are 3 main joysticks in that file . I have no idea which one to use. I am running CH USB rudder pedals and I also know the DX axis of my rotaries. Anybody done this? Anyone? Beuller?

HiI purchased a new PC and I'm hesitating about the OS I should install on this system.Does the Professional version of Win XP performs better (performance wise) when compared to the "Home" edition ?The price difference is significant but is it worthwile to invest in the Professional version ? Thanks for your input ! :-)Twister

Hey,3 days ago after installing the new nvidia 53.03 driver on my GF4-ti4200 card I my FS9 worked good the first time I tried it. The next I used the sim the screen suddenly got all white and the screen didn't update at all. I installed the newest Flash BIOS to the motherboard to see if that helped, but it didn't help either. And today as I started FS this meesage came up before the Splash screen(see the attached picture).I don't know what to do, the driver install on the graphic card was clean as I deleted my old driver first...Do any of you out there know what I can do, to get on my wings again.My system: Dell Dimension 8100Win XPP4 1500Mhz512 MB RAMLeadtek WinFast 280 …

I didn