MS FSX | FSX-SE Forum
Subforums
96377 topics in this forum
-
What is the ATC callsign for SN Brussels? I have an repaint installed with that livery, but TAC doesn't recognize it. Thanks,Scott
-
- 3 replies
- 1.1k views
-
-
My FS 2004 install has been rock solid ever since I installed it just after release. All of a sudden a year later I'm getting out of memory error every time I try to load up. this is getting frustrating. I've re installed twice, deleted all my add on sceneries and still I get the out of memory and I should run disk clean up. I don't know why it thinks I don't have enough memory since I have over 11 gig free on the C drive. Also when I alt tab to the error message and then close it I get a facilities error in FS and it then closes out. The only thing I can think of that is new since this started making problems is Justin's new USA land class scenery. the old one worked fin…
-
- 12 replies
- 1.3k views
-
-
This topic has been moved by the moderator of this forum. It can be found at:http://forums.avsim.net/dcboard.php?az=sho...97&topic_id=867
-
This topic has been moved by the moderator of this forum. It can be found at:http://forums.avsim.net/dcboard.php?az=sho...97&topic_id=864
-
Just built a new rig consisting of: Intel D875PBZLK mobo, Intel 3.0ghz 800mhz FSB, 1gig Corsair XMS pc3200 memory, SB Audigy Gamer, and my old GEForce4 ti4200.Now, on my old rig (a P4 1.5ghz with 512MB ram and the same video card) I was getting frame rates no lower than 16 or 17, any aircraft anywhere with all slider maxed except the 3d clouds and low water effects. With my new rig I cant get any higher than 5 or 7fps if there is a single cloud in the virtual sky. What am I missing? I have turned off several of the unecessary processes by way of msconfig and the services tab, and have tried disabling hyperthreading in BIOS (no difference by the way). Why was my performace…
-
Greetings,We just uploaded a scenery file that will assist you in getting into Lakeland with FS9 per the FAA routing that is in effect starting Wednesday.I am sort of late, and the material is time dated, so if you wish, you can get it from my website at:http://tinyurl.com/3y6xvThe zip includes the two water towers mentioned in the FAA directions. The water towers are very frame rate friendly and have no bit maps to slow down your computer. They are for nav into LAL only. It also has fireworks going off at the power plant location to assist you in finding it. The power plant has strobes on each of the three stacks, but in FS9 it is very tough to see them in the day ligh…
-
For those interested in twin props, I have just released the AC500 in both VC and no-vc versions. This version has over 100 updates to previous Commander releases and features the new VC rain and VC specular effects.Filenames are ac500vc1.zip (VC) and ac500v1.zip (no-vc). The AC500 can be downloaded right here at Avsim. File sizes are about 11.4 MB.The support website is here: http://www.flightsimonline.com/ac500Milton Shupe
-
Very nicely done. Spent the last hour or so putting it through its paces.No nosewheel steering so you need to use differential braking (F11 and F12).Great VC for those who use them but a few gauges seem to be missing. No doubt there will be a fix for this (I hope :))Flies beautifully and it comes with some great sounds.Designed by KARI VIRTANEN and MIKKO MALINIEMIPanel by BRAHIM RHOULSounds by MIKE HAMBLY
-
- 1 reply
- 1k views
-
-
Here We Go Again.....The word is out that FEELTHERE is about to release their long awaited CRJ-200 and the word on their site is it is today...I am getting kind of bored with this hurry up and wait game that happens each and everytime a new add-on is ready to be release. I think it is time that the add-on industry sets a standard release time for new product instead of the standard....SOMETIME TODAY....it is my feeling that no annoucement should be made until the product is done and ready to be released.....I think that Eaglesoft has done a terrific job at this.Why cant we have a set time perhaps based on time at the GMZ for release.Just my thoughts
-
- 6 replies
- 991 views
-
-
1. I am receiving a tone followed by two beeps throughout a flight that lasted about an hour. I can't figure out how to turn it off.2. The throttles will not increse or decrease in sinc even if I press E followed by 1 & 2 which should sinc the throttle movement. If auto throuttle is on, the two engines do sinc as the power is increased or decreased.Any ideas? Thanks, Ron
-
The original price was $34.95 as many may remember but they (Wilco) have released the CRJ at a cost of $29.95 instead. :D Not a huge reduction in cost but a savings nontheless. Looks like Wilco did listen to the emails they received. Even though the reduction is only $5 for some reason when an aircraft goes up into the :)
-
- 0 replies
- 617 views
-
-
To see this fellow, owners of Aerosoft Manhattan should set the date to 4/29/04.John M.
-
hi,does anyone know of a "free" aircraft/panel/scenery importer for Flight Sim 2004?
-
Yesterday, for the first time, I decided to try an ATC monitered flight from EDDM to LIRN. So I filed the flight plan - ATC at EDDM took charge - I took off as directed, then ATC Vectored me around the sky a bit, asking me to change course and altitude a few time; finally bringing me back to the nearest waypoint on my Flight Plan. The last thing my Controller said to me was "Continue own Navigation"! - that was it :) I heard nothing more from them? My question is this, is this Standard ATC Practice in Fs9, should I have re-filed my FP nearer my final Destination, or is this as good as it gets?I enjoyed the initial experience, but just sorry it did not continue throu…
-
I have owned Microsoft flight sim 2004 since December. To make a long story short. It crashes to the desk top. I have reformatted my drive 10 times , reinstalled flight sim2004 20 times, purchased three different cards ati radeon 7500 first( Bad frame rates) 9600se second ( still crashing , now 9800pro. I have installed the latest directx drivers 9b and the latest ati 44 drivers. I am sure there is alot of ATI users out there with no problems. I now have great frame rates but sometimes 5 minutes, 10 or maybe 30...Crash. I have been on the phone with microsoft many times as well. I have spent 10-12 hrs a day seven days a week since I got this sim and no luck. I just can't …
-
- 22 replies
- 2.1k views
-
-
Hi,Is there one available?.CheersDan.
-
This topic has been moved by the moderator of this forum. It can be found at:http://forums.avsim.net/dcboard.php?az=sho...9&topic_id=1452
-
- 0 replies
- 633 views
-
-
I started getting a Windows XP Error message saying the programme had an error and would close so I uninstalled and reinstalled FS9.When I tried to load FS9 I got the splash screen which disappeared very quickly and then nothing happened. I then copied in the "N0-CD fs9.exe" and this time the splash screen remains for a few seconds and then I get the "error/closure" message screen.I had this problem once before, some time ago and I seem to remember someone kindly suggested a solution. Delete either a cfg or a setting file (which worked) but I can`t remember which file it was.Please can someone advise?? I`ve just bought the Manhattan Scenery and can`t get to see it :-(Many…
-
I was wondering if anyone knows of a good Kuala Lumpur Sepang International Airport scenery and/or any scenery related to Malaysia that works well in FS2004?Any feedback would be greatly appreciated!Regards
-
Hi all,I realise there are a few posts on frame rates and system specs, but after doing a search, i couldn't find what people consider to be GOOD FPS. I get around 20FPS with a heap of AI traffic and all medium scenery settings when flying with low end aircraft. I recently purchased PMDG 737NG (bloody fantastic) but with this i only get around 10-12FPS?! Question is : How much play does the graphics card have compared with the CPU and RAM. I've got a P4 2.8 with 1GB of RAM on a Radeon Se 128mb card. I don't know much about graphics cards, but will upgrading this card give me a lot better FPS or only 3-5? Any recomendations for upgrades? Running Windows XP.Second Question …
-
- 1 reply
- 693 views
-
-
Hi allHope you can help here. What do I need to do to eliminate the echo that you hear when adding jet sound to a twin engined miltary jet. Eg, if you add the sounds that came with Kirk Olsen's Viper to a Tornado for instance, it sounds really awful. Any adjustments to the sound cfg you could recommendRegardsErich
-
Hi people!Here's my latest pain in the a**: recently downloaded 3 things.......IFDG Boeing 767-300, IFDG MD-11 and lgav2002 by George Dorkofikis....this is what is still happening in the sim even after TWO reinstallations and the deletion of these 3 downloaded files (I don not of course know which one, if any, of these caused this problem but I thought it was worth mentioning) :http://forums.avsim.net/user_files/71006.jpghttp://forums.avsim.net/user_files/71007.jpgI've checked everything.....scenery library is normal...everything seems to be in perfect working order.....but this sh*t persists.Please help!!!!! I'm desperate! :(Matti
-
I am trying to master the Bell Ranger 206 but I have 2 questions: First, I am using the CH Flight Sim Yoke, and the throttle seems to control the collective nicely, but I never noticed the engine sound change as I increase or decrease power. Then I discovered the prop pitch lever (between the throttle and mixture levers) also seems to control power to a point and the engine sounds do respond nicely. What is this lever controlling on the real thing? Second, I went to external view to see what control surfaces move with control movement as can be done with the fixed wing aircraft. Nothing seemed to move. (I thought rotor blades change pitch or something like that). Are …
-
- 4 replies
- 1.4k views
-
-
-
Wow, cool new megascenery video and screenshots for No Cal. Video is sweet!http://www.megascenery.com/title-sfo.htm