MS FSX | FSX-SE Forum

So I plan a trip via PPFX. Export the flightplan to FSX-SE. Set up my aircraft and departing and destination airports with Aerosoft Simstarter. Get it all started, with Active Sky loaded and the sim looks good to go. Then I notice that the simulation is choppy and the FPS isn't what it should be with my FSX config settings. I close out everything, reboot the computer and reload everything. Then it purrs like a kitten and the simulation runs smooth and sharp. Any ideas on what causes this? I have a strong computer. Thanks in advance.

Hi. Just rekindling my passion about flightsim and when I tried to download a plane package, windows explorer shuts down every time I try to put the new plane in the simobjects/airplanes. If there is a thread already existing, I apologize but I could not find anything. Thanks again and it feels very good to be flying again... Ben

This topic is about compatibility. Have the FS9 2007 FranceVFR Martinique island, patched for FSX,a couple of years later, which includes the airport and am wondering if anyone has bought the new Martinique Airport 2018 from Tropical Sim and also previously the FranceVFR product. I had an issue with TahitiX and Papeete which was from two different developers. Had some issues i.e. trees on the runway etc. so I do not want to buy Martinique if I have similar issues as I never got them to be properly compatable. Contacted both FranceVFR, & TropicalSim but they had not checked for compatibility. Also have UTX Tropics & Caribbean.

Hello, i'm contemplating upgrading to pro, i'm womdering who uses the hgs is real life? Most of my q400 flying is in North America, i know Jazz uses it, not sure about Porter or United Express, and i think Horizon does? Also, can the hgs be selected on or off depending on what airline you're flying like the NGX? Not related to the HGS, but are the higher frequency/smoother control inputs really noticable? Thanks

I wonder if anyone else has encountered this phenomenon - NE not displaying in the area closest to the plane. Ignore EGCC to the right of the picture - NE doesn't overlay any airports. I'd just taken off in a default Maule, so not busting Mach 1. I was flying at about 2500 feet or so.You can see the area where NE was not being displayed, yet it works perfectly fine outside that area. The phenomenon did go away then reappear again. It must be a performance issue on my rig, but it's like a reverse LOD. I do like to switch to external views now and again and pan around.The scenery is VFR Real photoreal England and Manchester airport is the excellent & FPS frien…

Hi could someone please help, I have done clean install of FSX SE and EZCA V2 but when I scroll through outside views I keep getting top down view. Thanks in advance, Paul

Anyone having problems with the Air Illinois HS-748 textures by John O'Duffy? All but the fuselage work. The fuselage textures are black, the tail on the other hand looks great.

I have tried all the suggested routes to getting the steering tiller to work, but the only thing that works is the mouse way. I am using the 64 bit pro version in Prepar3d v4.1. I have tried using the aileron axis setting no joy. I used FSUIPC to set the spoiler axis on my Saitek x52 twist rudder axis. When I start the majestic control panel this shows up as working in the steering tiller section by moving both ways. When I start the dash 8 and put the nose-wheel steering on and try to taxi I have no steering except when I use my rudder and differential brakes. This does not work very well. The only why I have been able to steer is by mouse nly and using the steeri…

When I pause (temporarily disable from the FSX menu) EZDOK, then TrackIR stops working in FSX. Is there a way to setup EZDOK so that when I (temporarily) pause EZDOK, then TrackIR will still work? Thank you. reason: sometimes I have not yet setup an EZDOK 'landing view' for a particular plane, and need TrackIR to move to a position where I can see the runway! As you know pausing EZDOK restores the keyboard keys ability to pan and zoom the cockpit view, but it is much easier/faster just to move your head to do the same thing with TrackIR (instead of using the keyboard)

Hi all: Anyone have information on where this stands? I went looking today and couldn't find anything. Is this a dead issue? Thanks Rick

Hi, I have a problem with the Aerosoft A318/A319 the wings are missing the engines are missing and the back landing gear is missing it was working fine up until about two weeks ago any suggestion please.

Hello to all! I purchased from Japan the RJTT Airport scenery that came with Techno Brain Fs Add-on Collection Tokyo International Airport 2. Does anyone else have it installed in FSX?. I would like to share my experience and find solutions with runway 23.

hello evryone im not decided either to get pfpx or the aresoft airbux x or gsx note! that i can only get tow off these

I was wondering if I can install ### AI to a non fsx disk and link fsx to the disk to show the AI cause the disk where my fsx is installed doesn't have enough space for the AI.

Hi, Do you want to use professional EFB-tools with your FSX? Then take a look at the program: XMapsyV2 found on http://www.xmapsy.com. This helpfull tool sends data of own simulator aircraft and AI traffic information over your local network (UDP port 49002) to various EFB solutions - successfully testeted with ForeFlight and Garmin Pilot on IOS and Android devices. Michael

Dear simmer,I am proud to announce that my freeware Terra Emergence Project final v1 for FSX/P3D is now available here: Download (2 Gb) https://drive.google.com/file/d/0BzTKE8AjNyeCWjBrR3ZnQVJfU1E/view?usp=sharing Terra Emergence Project is a pack of ground replacement texture for FSX & P3D (Cities and villages are not affected by this texture pack.) IT can be use alone or on Global Orbx base pack (Don't change FTX regions) or GEX or other global product. A pack of trees is inclued for best color. Read carrefull the readme file before install. Visite my FB page or Youtube channel (see links in signature) for more medias. En…

So I was having issues with my computer and FSX (display resolution error), not to mention a hardware failure, decided to run a fresh copy of windows on a new drive, thus a fresh install of FSX. Part of the way through the install, FSX gives me "Error ID = 28 Unable to install message filter". it looks like FSX has loaded to the computer, so I try it from the program list. I get the same error, FSX will not start. I have looked up resolutions on the net for this and I have yet to find anything that leads to a fix. Any help would be great as I have no idea what more I can do.

Greetings Unto all: I am in the process of attempting to get an achievement from my virtual airline company vUAL. I must fly to all of United Airline's hubs with no other flights in between to get this achievement. I recently was notified from my Hub manager that because I fly the PMDG 737-800 and PMDG 737-900 as my equipment, that due to the fact that this bird cannot go direct from KSFO to PGUM without fueling in between that I could divert en-route for fuel. Here is my conundrum. I am planning on flying the PMDG 737-900 (with ETOPS) from KSFO to HNL(Honolulu). In HNL I am going to refuel, and depart. Non-stop from HNL to PGUM is not an option. Here is wh…

I've been thinking about FSDT KSDF, since it is their last FSX airport. I've seen zero feedback about it, so was hoping someone could help me out. My concern is that it will be like Flightbeam's KMSP, which can OOM on the ramp, so I'm somewhat hesitant purchasing it. Any feedback would be appreciated. Thanks, Ernie

Hi, Like my others I purchased a new airport (Doha’s OTHH) from a well known FSX scenery provider. I don’t seem to be able to add traffic to this airport using the My Traffic editor. I have created the notepad file with the required information for this new airport and made sure it is in the root My Traffic folder within FSX. Within the MyTraffic Editor, after opening the mytraffic database to edit, I then select the option from the top menu to “import airport.txt”, after this, when I check the list of airports, the number has not increased by 1 as I would have expected, and the airport ‘OTHH’ is not included in the airport list. Has anyone any ideas …

Playing around with traffic explorer in FSX and I noticed that when I uncheck the Aircraft only box that a number of VEH_cyhz_xxxx objects appear. xxxx being a name such as bagcar1f, bagloader, etc. All of these items are located in my SimObjects\GroundVehicle folder and a part of the SimAddons base scenery I installed . Now it's probably a case of "no harm, no foul", but none of the other GroundVehicles appear so I'm a bit curious as to why these might. I'll hit Simaddons later, but was hoping for a quick answer here. Thanks, Ernie

Hello, I have installed MCE (multi-crew experience) into FSX to try it out. I didn't like it, so I uninstalled it. However, some parts of it remain. ATC audio does not play when I am talking (readback, departure clearance request, etc.). I have uninstalled and reinstalled FSX, and I have repaired it. I have the DVD version, not the Steam. I was able to get back the controller audio, but not myself. I would love to be able to actually hear myself again. Any help is appreciated!

Hi Team, I have lost my runway textures for default KEWR (Newark) as just brown dirt shows up. I have used different payware scenery Blueprint, and recently final approach simulations scenery. I did not like any of the scenery's and have unistalled all of them. I have looked in folders for dual textures, checked the main FSX files, but I can seem to find any double textures. Any help would be great. I'm running FSX

Can anyone kindly talk me through how I can import flightplans into the FMC from PFPX.Or where is a PFPX-created flightplan exported to i.e. which path?

Hello, I had EZCA v.2 and I removed it. I then had Chase plane installed and removed it due to an FSX issue and started repairing and removing addon software until I got FSX working. It now runs albeit with land as water. something doesn't seem right with the camera views and so I went to view the cfg in \AppData\Roaming\Microsoft\FSX and when I open the file up it has nothing in it. I then open the backup file and it has nothing in it? that doesn't seem correct so how do i repair it or do I? I looked in the main FSX directory and the camera.cfg has data in it. Any thoughts? Steve