FS2CREW: FLIGHT SIM LABS AIRBUS

Good morning all, I am having this problem for some weeks and this is driving me crazy, as I uninstalled and reinstalled fs2 crew several times and still not working. The problem is that once I land, I start the chrono and wait 3 minutes, after that in the after take off checklist phase or in taxi phase (No difference) I command to shut down engine 2, and nothing happens. I can see the green bar recognizing exactely what I said, but still no action is taken by the PM. Another problem I am facing is upon departure, when I confirm for example 25 L, even the green bar recognize it, still says, 00 confirmed. I appreciate your help! Thank you …

Hi Bryan, Just before I started the FS2Crew configurator (upon installation of the program) I get prompted to point to any panel.cfg file for the FSLabs. On my system this is located here: E:\Prepar3d v4 Add-ons\FSLabs\SimObjects\Airplanes\FSLabs A320 CFM\Panel\Panel.cfg I then got the message that FS2Crew has sucessfully located the parent folder of the FSLabs addon. After entering my details (name, order number and email adress) and pressing activate, the configurator once again asks about the location of any panel.cfg file. I then choose the same file location (as shown above). Afterwards the configurator tells me that the parent folder of FSlabs was su…

Hi All, I have an issue, I am a native english speaker, with a normal British mild accend (I.e. not from Scotland with a broad accent) For some reson whenever I say 'TOGA' or command 'Flaps 3' it completely ignores me! Any chance of some help please? Thanks

Hi guys, I found small errors, in version 1.4, the first officer no longer stops the elapse time in the clock after shutdown the engine, moreover, when I turn off the engines after a flight the FO changes the range in both NDs. Can these small bugs be fixed in the next version? Regards! 🙂

Don't know if it's a bug or just not to avoid, but I noticed that when I do an RNAV approach, the PM will turn on his "ILS" display which you wouldn't do on an RNAV approach (to my knowledge). At least I'm not doing it, just as Blackbox711 "teached" me in his RNAV appr. tutorial.... 🙂 BR Stu

Hi Bryan - Have enjoyed using the P3D4.5 FS2Crew for PMDG NGXu, and recently transitioned to V1.4 of FS2Crew for A320 running on FSL's v2.0.2.450 (the latest). Enjoying learning Airbus SOPs and flows. All going well, except that I've found that my FSL A320 autopilot consistently disconnects after takeoff as I climb out through 10K-12K ft. Guessing that something is happening in FS2C that is inadvertently changing the aircraft climb power settings, and causing the disconnect. I have to disconnect ATHR, dive to recover the airplane and then reconfigure all the automation to resume the climb. Doesn't happen when FS2C isn't running . I'm wondering if my prob…

Hello quick question sometimes the PM will set the flaps trim etc before I takeoff or pre taxi but it’s not done it last couple of times do I have to trigger the spoiler to get it to do it of it makes sense thanks

Hi, I'm working through the tutorial as well as through the release notes of the last few versions that aren't documented in the tutorial yet. I'm trying to clarify a few things that I can't seem to get working. Maybe the order in which things are happening are different than what's in the manual or I'm simply doing something wrong. It's probably the latter. The tutorial mentions a before start clearance flow that's triggered when the loadsheet is received. The loadsheet was received at around time +16 so I waited until +10 and the flow never happened so I just moved on. The tutorial suggests the PM should be calling to have ext power removed before the sta…

hi, after a long time that I was no longer using the fs2 crew, I decided to try again. the problem is that voice control does not receive my voice, I tried the forum completely, but nothing to do. however even trying to change from voice to button control, P3D crashes

Hi Bryan I am using Fs2Crew a lot for my FSL airbus, my 747 and 777. I did 3 voice trainings sessions and was always happy how FS2Crew understood me. However in the last few flights (with Airbus an Boeing) I struggle more and more and my commands are not understood in a strange way. Instead of Affirmative it understands , seven five center, seven two and things like this, not even close. Also with short words like set, on or off I struggle a lot. Any idea from your side what could cause that? Maybe a bad windows update? Should I do another speed training maybe? Dani

Hello I’ve brought this today slightly regretting it now I started the preflight event. Well the PM turned on the gpu after it was in the avail state goes through his checks then says to ground about the chocks but then he disconnects the gpu so it’s goes off? Then after just trialling and having a look I said check the box he couldn’t even get the fmc on and look at anything? I paid 30 quid for something that has potential but maybe it doing something wrong but man that was frustrating!

Hi, Was wondering, possible for you to consider adding feature to have FS2Crew preflight event sync with GSX since FSLAB is having great integration with GSX. I'm have no experience of develop of flightsim addon but if i not wrong, GSX had such variable/API for developer to read or do some action with it. Things like flight attendant ask if ok to board pax, after said yes, FS2Crew initiate boarding via GSX(Provided ATSU boarding is setup correctly) either Via FO MCDU->ATSU boarding page->board now or simulate control+F12->Start boarding instead of we do it manually(Kinda not realistic), and also monitoring boarding pax progress via GSX instead of t…

Hello, Today I have purchased the FS2Crew for FSLabs A320-X. The installation went smooth. I ran the Configuration Manager and I enabled all three airplanes (A319/20/21). After that I ran the Windows Speech Recognition Voice Training and finally I lauched P3D. I opened the FS2Crew menu and changed the interface to voice control. After all of that I cannot get the green speech bar when I speak. I have started many times the preflight events without succeeding. And I even unistalled the program and started all over again without getting any result. A part from that every time I close P3D I get the message P3D stopped working. My PC is an MSI working with Re…

Hi, using the FSL A320-X and FS2Cew I am experiencing problems with the sim (P3D v4.5) closing properly. P3D itself shuts down and it's not showing in the task manager anymore. But ActiveSky shows the sim is still connected and Aivlasofts's Simplecam is still running. Normally this app should close automatically with P3D. I have uninstalled FS2Crew and things are back to normal. Closing P3D with the A320-X running takes a bit longer (black screen) but AcitiveSky shows the sim is disconnected and Simplecam closes normally. I am not experiencing these kind of issues with any of the default aircraft (no other add-on aircraft) installed. Can this be fixed someh…

Today I entered a little to late time for boarding in the ACARS menu. The problem was then when FS2Crew ask if it is ok to board kit will not sync and when FA ask later on if it is ok to close the door all passengers are not onboard yet. Is it possible to implement: 1: Answer FA "no" when he/she ask if is ok to start boarding (it could also be refueling and catering service still running). That would then cause a little delay so maybe the FS2Crew-flow could then paus until PF tell FA to "now ok to start boarding". 2: When FA asks if it ok to close doors it wou7ld be possible to answer "no" and same procedure as in my suggestion 1 that you nweed to call FA t…

Hi, recently installed FS2Crew for the first time and after following the documents and all, I gave it a go. First time I did so, P3D sound was lost not long after I pressed the HS button on the main panel. The sim did not crash, just no sound. FS2Crew sounds, including the audio test still ran normally. Resetting the audio in FS2Crew did not recover the P3D sound (don't think it's supposed to but worth a try) After a few more attempts and getting the same result, I tried loading P3D but only bringing up the FS2Crew main panel a minute or so after the FSLabs loaded. I also refrained from pressing the HS button, waiting a minute or so before doing it. Now P3D sou…

Hello everyone! I want to ask one thing: is it possible in the next updates to add different alternatives to the turnaround time? Example, Easyjet if I remember correctly it has 20 minutes of transit .. And often I finish preparing the plane well before 35 minutes😆 Thanks in advance!

Hi, On the 1.4 version, During takeoff, after callout "takeoff" and set thrust the copilot callout "thrust set" before I finish my FMA callout (Man Flex SRS Runway A/THR Blue). (Sometime even before I start to callout FMA) Also during approach, when I call out loc blue(Which identify as "loke blue" on green bar) the PM say CHECKED twice, VERBOSE PM was off. Lastly, I also have the Aerosoft version, really love the Asian sound accent, any chance to be implemented on FSLAB as well in the future?

*** Button control *** Hi. I just had a strange behavior when I tried a packs off takeoff: Packs were off (set on the DEP page), I performed the take off. After "positive rate" I pressed the button to command "Gear up" (as usual), but the PM did not do anything. Then after a few more seconds (without me doing anything), the PM said "packs on", switched on BOTH packs and then said "Gear up" and retracted the gear. (SmartCars shows "Gear lever raised at 902 ft"). Did I set or do something wrong? Stu

Still another question from newbie with FS2crew and FSL; i got stuck in yellow flashing text : climb flow... i do not find anything related to ''climb flow'' in handbook, sorry. Tried restart checklist command, phrased/ set and checked... nothing... stuck in climb flow...

I'm not sure if this issue has been discussed before, but PM confirms rwy as "zero zero confirmed", I have RAAS installed and I did use "make runway" tool but it did not work, this happened after I updated to the last version of fs2crew.

I use now UGCX, confused about UGCX voice and groundcrew were speaking, so its better not to click the commands in the UGCX popup menu ? just speak : for ex/ start push / so i can voice control all UGCX commands ? 2nd question: how to actvate/ disactivate jetway ?

Hello, I'm thinking of buying Fs2Crew for FSL A3xxX but I'm not really interested in too much automation or involvement by FS2CREW. I'd rather have FS2CREW for callouts, landing gear, APU and doors handling logics only. I would really love such a flexibility in FS2CREW settings - from very basic to very comprehensive, provided they can be reduced or shut down completely at my will. Thanks.

Hello Everybody, i have a MACTOW of 30.3 which would result in an Pitch Trim Setting of 0.3DN but the PM is trimming 0.2UP during the After Start Flow. And Idea? Greeting Michael

Hey Bryan, Wondering if you can add this ability in the next update: learned recently that EZY operates their landing lights a little differently. They turn them on as needed, but 90% of the time they're turned on when the gear are commanded down. Conversely, the landing lights are commanded off when the gear goes up. I think this feature exists with the NGXU. Any chance we can add that as an option?