FS2CREW: FLIGHT SIM LABS AIRBUS

Hi Bryan, despite being a long time user of most of your products in various addon aircraft, I must admit I have had very little time to become familiar with the FSLabs FS2Crew version, so my question here might be put simply because I have overlooked something. I have noticed that in some situations the FS2Crew predeparture flows somehow conflict with the FSL ATSU flows. Just to mention a couple of examples: syncronization between when FA asks if ready for boarding and the boarding time selected in ATSU, or the PF asking cabin crew to arm slides and crosscheck, which is also a part of ATSU flow. Is there a way in the current version, or is it possible to imple…

Hi Bryan! :) I wanted to know if you noticed that the first officer during the touch and go is a bit buggy, the landing checklist (button control) remains on the landing memo item, when touching on the runway he/she says "go, thrust set" with the engines at idle..😂😅 Thanks in advance! :D

When i try to say: Start the apu nothing happend... or turn on the apu, maybe is wrong command?

So I have installed fs2crew update and my config says 1.7 but in sim its still 1.4...? I've checked the version located in the fs2crew2010 folder in main directory and they match. Really confused as to why its not updated within the sim.

Good morning, yesterday I reinstalled FSLabs A320 and 321 after I delete firstly the hole files with name FSLabs on my PC. After new install I check in the FSCREW config the buttons for enable FSCREW an put it into green. But, now in P3D there opened now FSCREW screen with the autofeather button set. Do I have to reinstall FSCREW also? Roland

Hi, today I got stucked while I tried to install the new v1.5 Version. As before during the initialization I have to point the configuration tool to the correct panel.cfg but when I do that it says "could not find FSLabs parent directory for given path! Try again". I tried it multiple times but without success. My FSlabs folder is located at my Prepar3d V5 Addons folder. Any help would be really appreciated! Regars, Felix

Hi Brian, i've installed the new version for fsllab +5... but when i'm pressing N on keyboard nothing happen no panel appear. I just follow the post on panel.cfg before posting but all is in in my files. I've reinstalled all the aircfraft but nothing change... Thanks for your help

Dear Members, is there a possibility to port over my purchase from aerosoft to fs2crew? I bought it at the aerosoft store and they did not manage to update it yet. It still shows version 1.4 I would appreciate help Have a nice day

Hello, After I updated to 1.5a my FO doesnt set the transponder to TA/RA anymore with the before takeoff flows. I didnt have these problems with the intial release. Also the ''silent'' after landing checklist gets stuck after landing, It doesnt change automatically to the next phase and I still have to ''command after landing checklist'' to let the FO do the flows. regards

Hey, i have installt the newest version. But now i have the problem that i cant open the FS2Crew Bar. Its all activated and a key is alsow asseind. Any ideas? Using P3D 4.5 HF3. Greetings

Hello how do I save my settings I noticed on my flight tonight some settings I changed didn’t save? Matt

Good day captains, Since the 1.5 update whenever I speak "Cabin crew arm Slides and crosscheck" the fs2crew software is not pressing the PA button. I have tried to reassign it in the mouse macros, still not working. Should I do right click and then assign that mouse macro? Or do I need to do something else? Greetings Erik

Dear FS2Crew Bus Drivers: Several of you reported that the FS2Crew P3D V5 config manager was unable to locate your FSLab's panel.cfg. We need to figure out why this happened to some of you. You can add the FS2Crew panel.cfg entries manually as described in the other thread, but we'd rather figure out why it's not working for you. Let's all keep this in one thread please. Let me know: 1. Did you manually move FS2Crew to P3D V5 without waiting for the official FS2Crew update? 2. Please paste the contents of your ADD-ONS.CFG here. Location: C:\ProgramData\Lockheed Martin\Prepar3D v5 You should see something like this in th…

Captains, There's a new version of FS2Crew for the FSLabs on the FS2Crew server and Simmarket. Other 3rd party have not yet received the updated version, but they will soon. There was an issue with the P3D V4 Config Manager not adding entries properly to the panel.cfg file, and there was an issue where if you had SpotLights installed it would confuse our Config Manager in P3D V5, resulting in the FS2Crew entries not being added to the panel.cfg file. Both these issues have been resolved and they're now on the server. Apologies for any inconvenience 🙂 Best,

Hello what’s the score with I have control you have control done a flight today and there was it didn’t work? Regards Matt

Hi, when I use single pack ops (ie EZY uses only pack 1 on ground) and packs off for t/o, with button control the PM will switch off pack 1 correctly before takeoff but doesn‘t recognize pack 2 being off already and will switch that one on. Did I miss something in the options? BR Stu

Dear Bus Drivers, Now that FS Labs has released the P3D V5 version of their mighty Airbus, I'm reminding FS2Crew users to please ***WAIT*** for our official installer that supports the P3D V5 version of the FSLabs. If you try to port FS2Crew over manually, you'll likely mess things up and that'll cause problems when you try to install the official P3D V5 version. The P3D V5 update for FS2Crew users will be FREE for anyone who own a current legal version. We **hope** to have FS2Crew P3D V5 ready by this weekend, but don't hold us to that! Patience please 🙂

Hello! Fs2Crew for FSL is a grate tool! I would like to ask for some options that are used by low cost operators. 1) ability for PM to start APU 10 minutes before departure 2) one pack on the ground 3) landing lights off in clean configuration Thank you!

Hey folks, when i load cold and dark and start fs2crew he doesn't turn on batteries or external power is that correct? i dont want the APU starting until near departure time.

Hi, I don't do go-arounds often, but for the second time now the PM stopped "working" after the final touchdown (button control). So I initiated went around, called G/A-flaps, worked through all phases/checklists and positioned for another approach. I got all commands as expected, PM reacted normal, setting flaps, gear, calling minimum etc.... but after touchdown I didn't get "spoilers - reverse green - decel - seventy knots" and also the PM didn't perform an after landing flows anymore. Is this a bug due to the G/A or could be something else broken here? Thanks, Stu

Hello, I may be a bit blind but I've have had a look in the manuals. Is there not an option to be the pilot flying in the first officer seat? Many thanks, Acerazus

Hi, I am considering purchasing through the Just Flight store as I have some credit to use. I would like to know how the updates work if I purchase from their store, in particular the transition to P3D5. My question is, if I purchase FS2Crew for the FSLabs Airbus on P3Dv4.5 from the Just Flight store, is it possible to upgrade for free once the update for P3Dv5 drops? Thanks for any advice! Phill

Hi, I've been using the FS2crew on the bus a few weeks now and there do seem to be a few quirks when compared to the PMDG versions. The main one appears to be during the preflight events, if I have the aircraft configured for a turn around. Most often the pnf will turn off the Apu, even though it's already on, and also he seems to disconnect the GPU, but then continue to press buttons as if he just connected it - this behaviour isn't the same in the PMDG FS2crew modules, which seem to be more aware of what they are doing. Is this a bug? Or is there some procedure or setting I should be doing so that I can power up the plant and then let the pnf perf…

Hello Ive been having this issue for several months with no resolution. Any suggestions are highly appreciated 1. On the Bus, Although i have selected "SKIP EXTERIOR WALK AROUND" it doesnt seem to skip the walk around and FO takes roughly around 5mins before starting up 2. Commanding the "Select/Arm Approach" call out seems to do nothing Any suggestions? Regards Aaqib

Hi Bryan, I see in Airbus real life that, when at minimum during approach, the PNF says "minimum" and the PF replies "continue". In the FSLabs 320 if I (PF) reply with "continue", the PNF doesn't say anything, while he reacts with "checked" if I say "land". Can this be changed so that the word to speak is "continue" and not "land"? Thank you and regards.