FS2CREW: FLIGHT SIM LABS AIRBUS

Hello to all! I found a bug in the new PM female voice. When the after landing checklist is complete, she speak "After approach checklist complete" 🙂

Hi Bryan! First of all, thank you for adding the feature I asked a few months ago! I wanted to ask only one thing: In the Autobrakes section there are only LOW or MED, I use the button control, I would like that in the following versions it is possible to select OFF. As long as it is possible to do this. Regards! 🙂

Hey Bryan! Here's a few things I've noticed with FS2crew FSlabs since the last two newest updates with Fslabs: When asking for the ground to disconnect the external power, they no longer remove the chocks in the process. With this latest build, the FO doesn't turn off the fuel pumps as a part of the parking flow. When asking for the ground crew to connect external power, nothing happens (as in the FO responds, but doesn't actually perform the action). Let me know if there's anything else you need from me for these!

I've no idea, also not sure the Bug came from FSlabs by themselves or Fs2Crew. From picture, the Right thrust lever doesn't seem interact with each other, despite the setting BOTH. The things I have done. 1. Re-install Fslabs(The newest version) and fly without Fs2Crew, the lever work properly. 2. Re-install FSUIPC5 then new configure. the lever work properly. 3. Installed and activated Fs2Crew, sometime it's happen (but not every time when I start P3D) To resolve this, so far, saved >> closed P3d >> Re-loaded Worakrit Mars [

Hi, my FS2CREW has not worked since the latest FS Labs update. I have uninstalled and reinstalled same but to no avail. I have ensured key assignments are correct but it doesn’t seem to be there at all. Mark McNulty

Dear Bus Drivers, V1.2 is ready for testing. It features some new changes and some additional UGCX integration. If interested in helping test, please send me a Support Ticket via: www.fs2crew.com

Button control: Recently I forgot to do the after landing checklist, and upon gate arrival I turned the engines off and was suddenly powerless, because the PM did not start the APU in his after landing flows (triggered by retracting the speedbrakes). Apparently he only starts the APU when he reads the APU item on the after landing checklist. Is this on purpose? Greets, Stu

Hi Bryan, Do you think FS2Crew will be compatible with the FSLabs A321 as soon as it is released or will it need some modifications? Thank you.

Hello, so far FS2Crew works flawlessly with the Airbus. However, I have one feature request: is it possible to add an option that the PM keeps the RWY turnoff lights on when he does the after landing flow? At night they are kinda useful and so I have to turn them on again. Thanks! Martin

Hello! I am on the actual version of the Bus v2.0.2.415. FS2Crew version is v1.1. I use Voice recognition on WIN10 with P3Dv4 v4.5.12.30293. First I noticed that the FO turned the taxi light on during the before start procedure. After the pushback and start of the engines he performed his taxi flow (set to activate automaticly) but he forgot to arm the speedbrakes and didnt set the flaps for takeoff. I restartet the flight after this to perform it without Fs2Crew. Now I am reporting to see if this was just a hickup or if others also experiencing this. Thank you. I paste here what I found inside the Fs2Crew manager in terms of log: Curr…

Hello.I have bought FS2Crew version Captain's (with RAAS) for FsLabs A320 but doesn't work even there is no at addons of P3Dv4.Even I downloaded and replaced new one DLL.xml from FS2crew to fix it but nothing.Any help?

Hi, I was wondering, is there a go around or missed approach procedure? Can't find any in the manual... Thanks Stu

Is it on purpose (diversity?) that the EU PF will just say „No blue“ on the before takeoff checklist ECAM item compared to the other languages where the PF says „Takeoff No Blue“?

Hi there, I noticed when I set the options on the CFG-Callouts page, the "Runway in sight" setting is never saved (I turn it off, but it's back on on the next sim-start/flight). The other settings are saved. BR Stu

Hi, is it normal that the sound/voices from FS2Crew only play on one of my speakers? BR Stu

Hello everyone! Yesterday, seeing several videos on Youtube, I noticed that often, immediately after retracting the gear, the spoilers are disarmed and the taxi light turned off. Is it possible in v.1.2 to add this option in the DEP page? Regards. 🙂

Hi there, So my FS2Crew was working flawlessly until a few days ago when suddenly, the PM won't set the GPU on (despite the setting being enabled), the TCAS before TCAS and the transition level is stuck on "Passing level 030" no matter the Transition Level setting in the DEP page on the SEC panel. And then he's very late on the 10k flows and actions. Any ideas? I've uninstalled and reinstalled the program as well. Many thanks, Matthew

Hi, Seem to be having some issue with packs off for takeoff. Selected in the departure briefing as Packs: Off, when lining up, I put the nose light to TO and the PM does his flow but never turns the packs off? I have tried several flights and this happens on each of them. Thanks

Removing FS2Crew to install a fresh version I noticed that besides the "FS2Crew: FSLabs Airbus Edition" I also/stilll have an entry "FS2Crew: FSLabs Airbus V.1.1 PUBLIC BETA" in the list under "Apps & Features". If I try to uninstall this beta it just uninstalls FS2Crew all together but keeps the entry of the PUBLIC BETA. This one I just can't uninstall, I get an error message that it couldn't be found. Can I just ignore this or could it lead to problems? Thanks Stu

Hello, I don't know if I'm really mumbling that hard, but the PF has a lot of trouble getting my readback correct. Whenever I depart as PM with Flaps 2, the command and readback for flaps 1 works flawlessly. But when the PF commands "Flaps 0" and I read back "speed checked, flaps zero", it always understands (reads in the green line) "Speed checked, flaps two". I tried pronouncing it different ways, but it will just not work. at some point it even shows "speed checked, flaps full" although that doesn't make sense at all. Only with set and checked I can proceed, otherwise he will not call for the After Takeoff/Climb checklist. Can you please check whether there i…

Hey, I've just recently upgraded computers and have been setting P3d up on my new system, however, I've run into a few troubles while trying to setup FS2crew on the new system. I've set FS2crew up following the instructions (same as I did on my old system) yet, when in voice mode, FS2crew fails to recognise anything I say. I can confirm that voice mode is enabled. I've also attempted the voice training multiple times to make sure that my voice is being detected correctly. I've tried a few things like using both English-US and English-UK speech profiles however, my voice is still not being detected by the sim. Additionally, "Allow desktop apps to access your micr…

Hi All, I would like to purchase the FS2CREW for the FSL Airbus however I would like to inquire what's the difference between the Capt version and the normal? Your feedback is greatly appreciated. Thank you

I'd like to insert my own Call Sign. Is this p;possible, and how? Barry Cameron Langford, BC Canada

FSLABS A320 loaded at an airport and FS2CREW opened.with Before Start Checklist showing. I started FS2CREW Configurator and selected Map. There's a world map with numerous aircraft symbols displayed at various locals. However, I don't see my aircraft location or symbol. There is a message "you are using a browser that is not supported by the Google Maps JavaScript API. Consider changing your browser. Learn More Dismiss." Same message with Edge and Chrome. I dismiss the message and able to use the map but unable to maximize it or see my aircraft location unless I know exactly where it is and move the map to that location. What's up with your map? Does it work or no, and if…

Pulling into Naples and its as wet as a dog here. Doing the after park checklist, the first officer goes, "consider heavy rain"? What's this mean? Couldn't find anything in the manual about it.