FS2CREW: FLIGHT SIM LABS AIRBUS

After various attempts, I am looking for some guidance. I have the Prep3Dv5 with the latest update of both that and the FSLabs A320X. Now I am having issues with the voice commands, example when I start the Before Start Checklist, it will suddenly not read my commands in the Green text, and I get no response. I have tried multiple times to make sure correct response, but seem sometimes it does work and other times it doesn't. Finally I tried t load everything up, and as I was starting the engines, the Sim just crashed, twice this happen, and only when using the FS2Crew software. Also during the setup, the procedure with setting Main Butto…

If you're interested in change log the V1.9 change log, please send me a support ticket at: www.fs2crew.com

Using Fslab A320,After take off, the menu get stuck at climb flow.

when I select (C) this option jumps to the parking checklist and does not execute the sub actions within the "After Landing Checklist" and I have to go back so that these checklists are carried out. I really don't know what happened or what went wrong with my V1.8 update. Any help or solution to this please and thanks for the update

Hi ! I have a little question about the "Flying as the PM feature". I red the manual but couldn't find the answer. Is it possible to take-off as the PM and then switch during cruise to be the PF for landing. Or the opposite : PF for T/O and PM for landing ? Reading the manual it looks like you are the PM from TO to after landing. Thanks in advance !

I want to buy, but I don’t know the difference between these two products. Which one should I buy?THX.

Hello All, as far as i know and observed on my recent flights, Easyjet is starting the #1 Engine first and then the # 2 Engine. Also they retract the landing light after Flaps Up due to passenger comfort (no vibration and less noise in the cabin). Here are my questions regarding this. - Does it matte which engine is started first during the Eng Start Challenge? Manual says # 2 and then # 1. Does it make any difference if i start # 1 first? - Maybe you could do an option to retract LDG Lights with flaps up? I'am expecting that when i retract them by my self the f/o will then extend them at 10.000ft again? Greetings Michael

Hi Bryan, thank you very much for the latest updates to FSLabs and PMDG 747 FS2Crew! Now I don't have P3D crashing any more when I exit without loading FS2Crew! Best regards.

Hi! Is there a way to create my own recordings for button control mode? I'm thinking of just recording the PF part of the commands/replies with my own voice (for immersion I guess 🙂). I haven't found any audio files I could switch, so is this something that is just not possible? If yo, could it become an option in the future? Thx Stu

Hi, Since I installed FS2Crew I lost my Airlines cabin annoucement. They have been replaced by standards and loud anouncement I cannot mute or control with the ACP. Any possibilities to disable this feature ? I have been through CFG, and manual but didn't find anything related. It bothers me a lot ! Thank you in advance, Theo.

Hi, Literally only that one word, Windows recognises it perfectly fine, have added it to the windows dictionary umpteen times. Sometimes fs2crew will hear checked and set or "xxxx set" but 99% of the time it wont hear those either. Having as look through the logs, FS2crew is hearing "sent", but windows hears "set". Language pack is English - Australia, which I understand is supported now, and using UK crew region. Anything I can do on my end to fix this? As I'm having to skip through a lot of checklists.

Fs2Crew says it cannot find the panel.cfg. He suggests a path for me, which I take, apparently successfully. I still can't activate it.m The path goes in the fslabs 320 CFM. How does it work with the other versions? I don't understand, it's too complicated for me Fabian

If I give the FO control whilst climbing under FL200 when the aircraft passes through that level the FO announces "Cabin Crew prepare for arrival" which, of course he does automatically in the descent. It's happened three times in two weeks now so it's a regular 'feature'. Can it be fixed please?

Hi, I know the past few months were influenced by MSFS and new products etc, but is there some sort of roadmap regarding the further development or updates for the FSLabs version? There have been some interesting suggestions, requests and remarks here, just wanted to ask if there are any plans of incorporating those and making this great product even better? Best regards, Stu

Hi, on button control, when I select AUTOBRAKE OFF on the approach page/setup, the PM will correctly reply „OFF“ on on the landing checklist item „AUTOBRAKE“ but before that will also reply „OFF“ on the item „AUTORHRUST“, even though Autorhrust is on („SPEED“). Could this be a bug or am I perhaps doing sonething wrong?

This problem has been addressed in a couple of threads without a clear answer. I have two add-ons.cfg files. One located in C :\Program Data\Lockheed Martin\Prepar3D v5 (this file does not contain a package for FSLabs). The other file is located in C:\User\me\AppData\Roaming\Lockheed Martin\Prepar3D v5 (this one does contain a package for FSLabs). Should both contain the FSLabs package?

Good morning gents Has somebody already used the thrustmaster airbus tca quadrant with fs2crew? I might imagine that it could cause problems if you ask the FO to gear up, but the gear lever on the quadrant stays in down position? Dani

hi can you help me to understand why a lot of time P3D V4 X crash as soon start FScrew in A320fslabs?

Hello, I'm enjoying the FS2Crew package for the FSLabs. I have a few queries. I like flying in the FO seat. However I've noticed that as Pilot Flying, the PM seems to use my MCDU during the climb phase. Is there a way to solve this so that he uses his own MCDU on the Captain's side? I've now noticed that the PM doesn't turn on the strobes when I call the below the line checklist before lining up. As well, he doesn't turn on the Landing lights when I say takeoff like he usually does. Many thanks,

Hi. I have a massive bug in fs2crew during the parking flow suddently FSCREW loads me in EDDM

I would like to be able to NOT run any checklists and just call for engine start on push back and call for flaps to be set before taxi. Is this possible?

When pressing the 'N' key to open Main panel nothing happens. Any ideas thanks Darren Crosby

Just a suggestion, could it be possible to create a functionality that allows to jump to a specific flight phase? Reason is the case when I have a CTD, I just reload my fsuipc autosave scenario and continue. OR I want to practice some landings and load a scenrario where I‘m on final. I those cases, currently I always have to click through all items along the procedures to get to the ones I need for landing. It would be comfortable to just skip to „approach phase“ etc.. cheers Stu

Hello Bryan, I am experiencing again an old issue (which I though was fixed) on a brand new rig with fresh installation of P3D V5.0 HF2 and addons: whenever I have FS2Crew enabled on any FSLabs or PMDG aircraft I have P3D hanging on exit and the only way to quit is killing the process via Task Manager. In the past I had a similar issue which caused a CTD on exit. I am 100% sure it is related to FS2Crew because if I disable FS2Crew via its control panel the problem disappears. I have gone through all the actions that were recommended in the past (i.e headset OFF, etc..) but nothing seems to fix the problem. I have tried a removal/installation of FS2Crew but nothing ch…

Just did a full clean install of P3D5.1. Have installed FSLabs A320 and 321. FS2Crew shows this when opening the configurator: "FSX/FSX:SE/P3D path not located properly. Please launch FS2Crew Manager from Main_Simulator_Folder\FS2Crew2010\Versions\Airbuslabs" Getting frustrated here, I think I've tried everything. The addon.cfg shows the FSLabs btw: [Package.4] PATH=C:\FSLabs\FSLabs TITLE=FSLabs Aircraft Family ACTIVE=true REQUIRED=false