FS2CREW: FLIGHT SIM LABS AIRBUS

Hi there, so selecting a visual approach in the APPR settings will blank out the MDA, because there is no on visual approaches. Yet I will still have to go through the „Continue“ callout wir button control, which I often forget (and then trigger upon exiting the rwy after landing), because of course I also don‘t have a „Minimum“ callout by the Airbus on visual approaches with no MDA/DH set. Could this item be skipped automatically when selecting visual approaches or is this not possible? BR Stu

hi, a few months ago I uninstalled fs2crew p3dv5 because it kept crashing, and it made me crash p3d, yesterday I installed it again, and the first time I used it, p3d crashes again. in this period I also formatted the PC, but the problem persists

I know you don't want to drown us in options, but I'd really appreciate an option "no after takeoff / climb checklist" in button control, as most airlines I know don't use this checklist. Thanks!

Hi, unfortunately, I have a loss of around 5 FPS in the 320/321SL when opening the Main Panel. After closing the Panel, the 5 FPS will come back. I‘m using the latest HF of 5.2, I made a complete reinstallation of P3D incl. all Addons, the FSLabs is presently the only Addon despite some Sceneries. I‘m fully aware that it is some kind of digging in the dark, but maybe this is already a known issue.

hi everyone, just bought fs2crew for fslabs but everytime "briefing" is asked on checklist I already answered with "confirmed" but fs2crew did not response to me and the checklist is stuck...what shoulkd I do then?

Good day, it seems I got an issue with FS 2 crew sound with all the aircraft. But this time I’m flying FS Labs and the problem arose again. When I pause and put my flight into sleep mode and awake it to come back the FS 2 crew sound is gone. The engine sounds are fine just no FS 2 crew. I tried updating my sound drivers and all that is good. Everything is set as it should be. Any ideas?

Bryan, Wondering when we'll see an update for FSL's latest bus update? Tried enabling it and I get a "was not found in the default add-ons folder" with subsequent instructions to manually point the .cfg file belonging to the bus in the next window.

Hi Bryan, Today I installed for the first time FS2Crew on P3D v5 (while I have it already active on v4). I noticed that, when I activate it, it writes on the v4 panel.cfg, rather than pointing at v5. Could it be that the activator gets confused because of my folders configuration, that is the following? v4.5: D:/Simulazione/FSLabs v5.1: D:/Simulazione/FSLabs v5/FSLabs Looks like the activator "sees" the first part of the path, "D:/Simulazione/FSLabs", instead of considering the whole path, "D:/Simulazione/FSLabs v5/FSLabs". Is there a way to solve the problem? At the moment I just copied the panel.cfg file from v4 to v5 and it …

Hello everyone! 😊 As the title suggests, I wanted to know if it was possible to add a few things: 1- Yesterday, during a Touch & Go session (button control) I realized that it is possible to turn off the FD and the TRK/FPA activated by the first officer. Is it possible to add this step in a non-precision approach? I have also thought about the RNAV approaches, but I don't remember exactly whether the FD must be deactivated when the AP is disconnected, or in the RNP APP expect the FMA to change from FINAL APP to HDG / VS. It would be more convenient to have the first officer do everything while maybe you are engaged in a demanding Non-precision, such a…

I don't know if anyone has any use for it. But I created a checklist yesterday for the FSLabs SL EFB that follows the FS2CREW template. Go to FSLabs\SimObjects\Airplanes\FSLabs A320-SL\Airlines\FSL\Config and replace the "Checklist" section in ipad.ini with my settings. Make sure you backup the original ipad.ini first. [checklist] columns=3 [checklist.1] column=1 title=BEFORE START item.1=COCKPIT PREP;COMPLETED;B item.2=GEAR PINS & COVERS;REMOVED; item.3=SIGNS;ON/AUTO; item.4=ADIRS;NAV; item.5=TO DATA;SET; item.6=FUEL QUANTITY;____KG; item.7=BARO REF;____SET;B [checklist.2] column=1 item.1=WINDOWS/DOORS;CLOSED;B item.2=BEA…

Hi Bryan, will FS2Crew work with today's update v5.0.1.160 (& Sharklet release)? Thx

Hi, any chance to include an option to perform the Flight Controls Check directly after the Engine Start before starting to taxi? Regards, Daniel

Hi everyone, Even if the Crew Volume is set to 5, I can barely hear the FO, it is complicated when you have to hear the ATC and the FO at the same time. Anybody knows how to fix it ? I'm running the latest version of FSLABS A320/321 and the FS2CREW V 2.0. Thanks ! Romain Cannizzaro

Hi, Just an idea, I’d love a “Training Crew Expansion Pack”. Maybe some day you’ll find the time to develop a training captain, who will perform all necessary flows during a base training circuit especially during touch-and-go’s. The official Airbus Base Training Syllabi show quite an amount of duties/actions that are pretty challenging to do properly when flying alone (setting speed brakes, flaps, trim, rudder etc., all while staying in the centreline and handling thrust and controls in the correct way and order). I know, far fetched, nevertheless I put the idea out there 🙂 Thanks, Stu

I had to uninstall FS2CREW and all my A320s since the alerts were out of sync and everything, I reinstalled but nothing was solved There is something that I have wrongly configured because as I said I have uninstalled and reinstalled and nothing works to be able to synchronize the calls and controls Thanks in advance

Dear folks, i had some problems after updating fs2crew for fslaps a320 to v2.0. Therefore, as mentioned in the forum, i did the following things: 1) Removed FS-Laps A320 Software from my PC + Removed FS2Crew FS Laps Version from my PC 2) New installation of both software programs mentioned above, first the A320 and afterwards FS2Crew Unfortunately still problems. During flight, suddenly i can`t open "main panel" again and fs2crew doesnt work anymore. Further info: I installed fs2crew v2.0 a few days ago. All works fine beside the fact, that at destination airport, when arrived at the gate, suddenly "main panel" doesnt work anyore or more in…

Hi, I have two question regarding a visual approach procedure with button control: I noticed when I do a visual approach and select that approach type on the APPROACH BRIEF (2), it will set the MINIMA to NO, which of course is correct. Now my questions: 1. On the approach checklist item "MINIMUM" the dude will say "zero feet set". Is that correct phraseology or a compromise? 2. After the LANDING CHECKLIST Fs2Crew still expects me to click through a "CONTIUE" callout, even though no minimum was set or called out (because it doesn't apply to a visual approach). Is this a bug or a limitation of button control mode? Thanks, Stu

I have to say twice sometimes before FO do anything or say anything... when i say Flight control check the fo will say ( Ready) but i have to say it twice somethimes before something happend.. only happend with Fslabs never had this issue with NGXU or Maddog or other fs2crew product..

Today I installed the latest version of the FSLABS a320 and after that I reinstalled the fs2crew but when opening the control panel I pressed the "SEC" and "PS" buttons but it does not open absolutely anything. It is a bug due to the new update of the A320 or something really happens. I hope someone can help me and thank you in advance

Usually the taxi flow is triggered if both engines are running and the PF completes the flight control check. For some reason, it is not being triggered until I go below the line on the before takeoff checklist, so you have to wait for the PM to check his controls before taking off. I made the mistake of taking off yesterday and the controls started going full scale left right up and down.\ UPDATE: I have figured out what this is related to. Due to the recently changed logic of the tiller disconnect button, this has broken the flight control check, and therefore the taxi flow. As it stands in this new version of FS2Crew and the new 151, the PM flight control check wi…

Hello I have been using your products for years now and I always enjoyed the voice pack expansions. Any idea if you guys are planning to make one for the FSLabs? I’m in urgent need of hiring new F/Os for my Airbuses 🙂 Keep the great work, your products are awesome!

Hi, I do not want the FINAL APPROACH FIX ALT callout. Since there is no option in the settings (maybe it could be added?) to deactivate this callout, I usually did not enter anything in the resp. field on the APPROACH BRIEF (2) page ("---"), which then won't trigger the PM to call out that altitude. Fine with me. Now, I recently accidentally added a value here and now I can't delete it anymore. It won't accept DEL or "0" etc... Is there a way I can erase that value (to mute that callout) again, maybe through a config file somewhere? Thanks, Stu (button control)

FSLabs just released an update today for their Airbus. Do **NOT** re-enable FS2Crew until we've released our next update, which will be very soon. If you do "enable" FS2Crew, the FS2Crew Secondary Panel will stop working do to changes in the FSLab's panel.cfg file structure. Our update will fix that. Cheers,

Hello, after the latest update, i cannot open the main panel of the fs2crew or use it in any way. The configurator says that i have to locate the addon folder each time i open it. After i select the panel.cfg file, it is successfully located and all A32x addons are green. But still, the panel is not popping up when in sim. I have tried to install the update again, tripple checked the button assignments, but don't see a reason for this. Any ideas please? thank you. Viktor

So far I have been unable to use fs2crew with the FSL airbus with out getting a ctd after clicking run preflight events. Any idea what might be causing this?