FS2CREW: FLIGHT SIM LABS AIRBUS

FS2Crew: FS Labs Airbus Change Log: Note: All updates are built into the main installer only. To obtain the update, login to your FS2Crew account, click "Completed Orders", re-download and re-install. There is no need to uninstall the old version first. The most current version is already on the FS2Crew website. If you purchased from a 3rd party seller like Aerosoft, etc., please give them a few days to get the file up on their server. V2.1 (23 May 2021 - Sharklets Support!) New Config Options / Features / Fixes: 1. The FO will now turn on the NAV light after starting the APU. 2. As per user request, a longer p…

Question: FS2Crew is doing something odd. It's turning off the GPU and I lose my power. Answer: Always load one of the stock FS Labs Panel States via the MCDU, such as Cold and Dark, etc. Do not use your own panel state file. Question: I read the FAQs and can't find my issue listed here, or I just don't understand something. Answer: Post a question in the support forum. Do not suffer in silence. Don't spend 6 hours trying to solve a problem that we can probably solve in 30 seconds. Speak out! There's no such thing as a dumb question at FS2Crew. This stuff is complex...we know that! Question: There is no "Enable FS2Crew" ent…

Capts, Got an email from a long time FS2Crew customer. Button control user. Great guy 🙂 But he had some issues with the Labs version because he forgot he's flying an Airbus, not a Boeing. Gentle reminder to everyone: Airbus and Boeing are not the same. They have different philosophies, and the crew procedures are quite different. Although the interface system is similar, FS2Crew for the Airbus is quite different from FS2Crew for the Boeing's 🙂 You need to adopt the "Airbus Mind" for this new FS2Crew product. Forgot the Boeing procedures 🙂 They don't apply here. This is a good site to learn, especially the "flows" sectio…

Dear FS Labs Airbus Drivers! After a long wait, I'm happy to report that FS2Crew for the FS Labs has been released! It's been a lot of hard work, and I'm happy to report that this is the best Airbus crew simulation within the technical limits of the FS Labs and P3D anyone could possibly create. This is a dedicated Airbus crew simulation, and it was designed to integrate directly with the FS Labs (and that was no easy feat!) Please visit: www.fs2crew.com to download. Requirements: 1. P3D V4 (FSX is "not" supported). 2. FSLabs Airbus (A320 and A319 are supported. A321 should work out of the box when it is released). 5 E…

Capts, If you care to use a FS2Crew-FSLabs signature banner, we have one here: http://www.support.fs2crew.com/help/manuals/#pageid=fslabs_airbus

Hi All I may not be able to see it for looking at it, but I've searched and read to no joy. If it can be done I'm sure its very simple but I fly using KGS as the weight, and during the preflight checklist when fuel is confirmed FS2Crew uses Pounds. Is there anyway to change this so that the weight in kilograms is spoken. Button Control, P3d 4.5 Many Thanks Pete

Hi, Banging my head against a brick wall. Recently purchased product. However the PM doesn't appear to be completing the pre-flight correctly. Shouldn't he request for the GPU to be connected and turn it on? The PM turns on the batteries and performs a fire check but nothing else. (I have the APU set to be controlled by user.) P3D loads into a default aircraft and I have set the panel state to Cold and Dark. I have also reset the mouse Macros. Not sure what I might be doing wrong?

I've just purchased the FS2Crew All Access pack and am trying it out on the FSLabs A320. Everything seems to be working but I cannot get an exterior walkaround to happen. I am PF and in Config misc. have selected Yes to 'ENGINEER DOES WALKAROUND'. When I run the Preflight events there is no walkaround triggered.

Hello boys, Thats exactly the problem. Everything works normally, but after takeoff (Not sure if specific step flow) it stops working. I notice that because the "green line" with my voice commands is not appearing anymore, no matter if i skip the step forward or backward or if i yell at the mic. The system is not responding anymore, so i continue my flight without FS2C. Sometimes it happens if i stay too mutch in the ground during flight prepration (So probabbly not a step issue, but....time issue?). P3DV5 HF2 + F2C V2.1 FSlabs Thanks in advance for your support,

Bonjour Le fs_lab airbus fonctionne seulement sur P3D ou est ce qu'il fonctionne également sur FSX. car dans la boutique le pack all access est pour FSX et p3d. Au moment d'installer fs2 crew fslab il ne propose que p3d

Hi guys, I had a two year break on my simulator and my pc. When I started all again i did a clean install of my Windows (10) and P3dv4 and all the addons. I am using the same equipment I did 2 years ago and everything worked fine no changes, and now I am having audio issues and I can't seem to find a way to make it work. I read all the topics and that subjects and applied everything that I could and was relevant to me, with no success. I know also that the issue must be somewhere in my system because as said I was using the same equipment and it was all working fine. I ran out of ideas... Now, to be more precise. When I start Fs2crew it picks up my voice and aft…

Hi All, Just a question if the new Airbus checklist/flow format will be supported? FS2Crew is amazing for training but I feel it would be better up to date. Is there a way for us to edit this ourselves if so I don't mind trying that. Alternatively a paid upgrade? Thanks in advance!

Hello, I'm experiencing more and more CTD when the PM is doing his Preflight flow, just after he tested the fire alarm and I assume goes through the ECAM pages (I start this 35min prior ETD). It definitely happens before he calls the ground. I had two consecutive CTDs today in KDEN, Gate A46, with the A320SL so I thought I could reproduce the issue. On the third try it finally worked however, but I don't know what happens. In the event viewer, the panels.dll is listed as involved module. Also, a .NET runtime error is shown: Application: Prepar3D.exe Framework Version: v4.0.30319 Description: The process was terminated due to an unhandled exception. Excepti…

Okay, here is what I have done: 1 - reinstall - no joy 2 - make sure FS2Crew is enabled - Yes - but no joy on FS2C starting with the FSLabs A320 loaded and at the gate. 3 - make sure Auto Feather is assigned to "U" as all my FS2C are. 4 - FS2C works with all my other aircraft OK - FSLabs A320 is loaded at the gate running on GPU and parking brake is set. Then I press U to open FS2C and nothing. I also have UGCX and it continues to work with FSLabs. OK - I am probably missing something simple but I am at a wall here. Your help is appreciated as always. I love FS2C. Franklin Duncan

Hello everybody, i didn't find any option for (Remote) De-Icing. Do i miss something or is it just not simulated? I'am looking for an option to leave the Flaps Up for taxi in the After Start Flow and to do the Flight Controls check after De-Icing is completed. Greetings Michael

Hello, I am using P3D V4.5 HF3 and was getting ready to takeoff and all of a sudden got a CTD. It is linked to FS2AUDIO64.dll in Event viewer. Why is this and what is a fix? Is incompatibility a possibility?

Hi, I am having a terrible time getting FS2CREW FSLabs version to recognize the word SET. This word is so integral to the checklists so it holds me up constantly. It would recognize it as seven most times. Even trying to say SET and CHECKED fails. The only consistent time it recognizes it is when I say STANDARD SET. I don't have this problem with the multitude of other FS2CREW products I have. Not sure why it happens with FSLabs. Any thoughts or suggestions on what may be wrong? Thanks, Chris

Hi there, for some time now I am wondering if there is any future for FS2Crew for the FSLabs. With the apparent (but I guess quite obvious) focus solely on MSFS products, I get the feeling that development for any P3D based products has seized. A lot of requested features, improvements and even smaller bugs have been acknowledged, agreed to and -quote- "added to the update list" in statements by the devs months ago without any update being released. I would love to see further improvements and additions to this great product, which I use on a daily basis and enjoy very much. So is this still getting any attention at all or did you guys just drop all non…

Hi... I am running the latest update, both fs2crew and fslabs. I have set Packs to OFF for takeoff, however nothing happens if I don't set off manually. After takeoff everything works fine to restore. Maybe is there any known issue with v5.3?? Thanks!!

Hi, I have been getting crashes ever since I updated to P3D 5.3: The program Prepar3D.exe version 5.3.12.28072 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Security and Maintenance control panel. Process ID: 1178 Start Time: 01d7ef4dc2b13bae Termination Time: 31 Application Path: E:\Prepar3Dv5\Prepar3D.exe Report Id: b530fdde-67ce-42bb-85dc-637bea130b16 Faulting package full name: Faulting package-relative application ID: Hang type: Unknown Fault bucket 1911426100244885362, type 5 Event Name: AppHangB1 Response: Not available Cab Id:…

I just bought the FS2Crew package and installed it as normal. But after running Configuration Manager I got this message: The FSLabs Airbus was not found in the default Prepar3D Add-ons folder. Please manually point to any panel.cfg file belonging t the FSLabs Airbus in the next window.\ This way FS2Crew can locate the proper path to your FSLabs Airbus. Please contact FS2Crew support if you require assistance. I tried to google it myself, but nothing worked for me.

Hello, I can no longer load FS2Crew for FSLabs A321. I currently have version 1.8 which can no longer load. My Order is 87829 date 2019/07/15 Please tell me what to do because in the forum I am offered a selection of ORDER COMPLETE that I cannot find. See you soon, I hope Best regards A Bordelais Jean TOURON

Hi All when i set (after engines starting and running) my selector setting on ign/start when i set on normal mode my flaps deployes automatically. How set this in the config menu pls ? Thanks

Hi Bryan, Tried out FS2Crew for my beloved FSL A32X’s for the first time and loving it so far (even if it sometimes doesn’t like my Boston accent) Have done dozens of flights with it no issue. Last night-while climbing out on a short hop and using my hide/show button along with popping up secondary panel a few times in a row, I got the XACT.dll crash. Ran a system scan etc. some things were fixed. I do not have ANYTHING on this PC other than stock windows and Flight Sim apps-it’s purpose built-no DRM stuff or anything mentioned in previous (years old) posts regarding XACT CTD’s. You can see the exact moment of the CTD, what I did before/after in…

Hello, I've got that problem on the FSLabs version of FS2Crew (version 2.1). All the settings I change in the config menu (setup, callouts, misc settings) are back to default every time I restart the simulator (I'm using P3D v4.5). Any idea of what to do to solve this problem. Thanks in advance.