I may not be able to see it for looking at it, but I've searched and read to no joy. If it can be done I'm sure its very simple but I fly using KGS as the weight, and during the preflight checklist when fuel is confirmed FS2Crew uses Pounds. Is there anyway to change this so that the weight in kilograms is spoken.

Button Control, P3d 4.5

Many Thanks

Pete

Thats exactly the problem.   Everything works normally, but after takeoff (Not sure if specific step flow) it stops working.  I notice that because the "green line" with my voice commands is not appearing anymore, no matter if i skip the step forward or backward or if i yell at the mic.  The system is not responding anymore, so i continue my flight without FS2C.      Sometimes it happens if i stay too mutch in the ground during flight prepration (So probabbly not a step issue, but....time issue?).

P3DV5 HF2 + F2C V2.1 FSlabs

Thanks in advance for your support,

Le fs_lab airbus fonctionne seulement sur P3D ou est ce qu'il fonctionne également sur FSX. car dans la boutique le pack all access est pour FSX et p3d. Au moment d'installer fs2 crew fslab il ne propose que p3d

I had a two year break on my simulator and my pc. When I started all again i did a clean install of my Windows (10) and P3dv4 and all the addons. I am using the same equipment I did 2 years ago and everything worked fine no changes, and now I am having audio issues and I can't seem to find a way to make it work. I read all the topics and that subjects and applied everything that I could and was relevant to me, with no success. I know also that the issue must be somewhere in my system because as said I was using the same equipment and it was all working fine. I ran out of ideas...

Now, to be more precise. When I start Fs2crew it picks up my voice and after a while it stops. When I go online on VATSIM to do a radio check they are telling me that my voice is static. However, three days ago, I was able to do 1 hour touch and go and my voice worked absolutely fine. After I have finished, I turned of my pc and next day turned it on, started everything and audio was gone again. 

I even did a restart of the audio via the system app. I use Logitech G533 headphones.

Question:  I get no headset audio, or I'm losing my audio.

Answer: 

1. Uninstall your current audio drivers via the Windows Control panel, and re-start your system.  You want to use the Microsoft "Realtek" drivers.  Sometimes, custom audio drivers can cause this issue. DONE

2. In Windows Sound options, uncheck the option that allows programs to take "exclusive" control of your audio device. DONE

3. Update your audio drivers. DONE 

4. Be mindful of not switching rapidly between full screen and windowed mode. I ALWAYS FLY IN WINDOWED MODE

5. Open the Windows "Volume Mixer".  Ensure the "Applications" slider is not muted. ALL ARE UP

6. Use a USB headset rather than one that plugs into the jack in your sound card. You don't need a fancy one.  A $20 generic one will do. BLUETOOTH HEADPHONES I EVEN CHANGED THE PORT 

7. Ensure your USB port is not going to SLEEP.  This can especially be a problem if using a USB hub. ITS DISABLED 

Also, the 2018 Windows Spring Update appears to add new "privacy" options for your microphone that, if enabled, can turn off your microphone. ALLOW APPS TO ACCES MIC IS ON

Thank you for any ideas that you might have!

Daniel 

Just a question if the new Airbus checklist/flow format will be supported? FS2Crew is amazing for training but I feel it would be better up to date. 

Is there a way for us to edit this ourselves if so I don't mind trying that. Alternatively a paid upgrade?

Thanks in advance!

I'm experiencing more and more CTD when the PM is doing his Preflight flow, just after he tested the fire alarm and I assume goes through the ECAM pages (I start this 35min prior ETD). It definitely happens before he calls the ground. I had two consecutive CTDs today in KDEN, Gate A46, with the A320SL so I thought I could reproduce the issue. On the third try it finally worked however, but I don't know what happens. In the event viewer, the panels.dll is listed as involved module. Also, a .NET runtime error is shown:

Application: Prepar3D.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: exception code c0000005, exception address 00007FFC6F088A2B

Do you maybe have an idea how to fix this? So far, I've experienced those crashes only when I was CM2 (right seat) and the PM is on the left seat and does his thing.

Thanks!

Best regards

Martin

1 - reinstall - no joy

2 - make sure FS2Crew is enabled - Yes - but no joy on FS2C starting with the FSLabs A320 loaded and at the gate.

3 - make sure Auto Feather is assigned to "U" as all my FS2C are.

4 - FS2C works with all my other aircraft

OK - FSLabs A320 is loaded at the gate running on GPU and parking brake is set.  Then I press U to open FS2C and nothing.  I also have UGCX and it continues to work with FSLabs.

OK - I am probably missing something simple but I am at a wall here.

Your help is appreciated as always.  I love FS2C.

Franklin Duncan

i didn't find any option for (Remote) De-Icing. Do i miss something or is it just not simulated?

I'am looking for an option to leave the Flaps Up for taxi in the After Start Flow and to do the Flight Controls check after De-Icing is completed.

Greetings
Michael

I am using P3D V4.5 HF3 and was getting ready to takeoff and all of a sudden got a CTD. It is linked to FS2AUDIO64.dll in Event viewer. Why is this and what is a fix? Is incompatibility a possibility?

I am having a terrible time getting FS2CREW FSLabs version to recognize the word SET. This word is so integral to the checklists so it holds me up constantly. It would recognize it as seven most times. Even trying to say SET and CHECKED fails. The only consistent time it recognizes it is when I say STANDARD SET. 

I don't have this problem with the multitude of other FS2CREW products I have. Not sure why it happens with FSLabs. Any thoughts or suggestions on what may be wrong?

Thanks,

Chris

for some time now I am wondering if there is any future for FS2Crew for the FSLabs.

With the apparent (but I guess quite obvious) focus solely on MSFS products, I get the feeling that development for any P3D based products has seized.
A lot of requested features, improvements and even smaller bugs have been acknowledged, agreed to and -quote- "added to the update list" in statements by the devs months ago without any update being released.

I would love to see further improvements and additions to this great product, which I use on a daily basis and enjoy very much.
So is this still getting any attention at all or did you guys just drop all non-MSFS stuff due to financial or economical (or other) reasons?

Are there any further plans for this product,  is there still an "update list"?

I'd really appreciate any statement regarding the future of P3D development. 

Thanks,

Stu

I am running the latest update, both fs2crew and fslabs.

I have set Packs to OFF for takeoff, however nothing happens if I don't set off manually. After takeoff everything works fine to restore.

Maybe is there any known issue with v5.3??

Thanks!!

I have been getting crashes ever since I updated to P3D 5.3:

The program Prepar3D.exe version 5.3.12.28072 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Security and Maintenance control panel.
 Process ID: 1178
 Start Time: 01d7ef4dc2b13bae
 Termination Time: 31
 Application Path: E:\Prepar3Dv5\Prepar3D.exe
 Report Id: b530fdde-67ce-42bb-85dc-637bea130b16
 Faulting package full name:
 Faulting package-relative application ID:
 Hang type: Unknown

Fault bucket 1911426100244885362, type 5
Event Name: AppHangB1
Response: Not available
Cab Id: 0

Problem signature:
P1: Prepar3D.exe
P2: 5.3.12.28072
P3: 61a546ea
P4: 129a
P5: 134217728
P6:
P7:
P8:
P9:
P10:

Attached files:
\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER3327.tmp.WERInternalMetadata.xml
\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER3338.tmp.xml
\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER3346.tmp.csv
\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER3376.tmp.txt
\\?\C:\Users\UN8GC\AppData\Local\Temp\WER401A.tmp.appcompat.txt

These files may be available here:
\\?\C:\ProgramData\Microsoft\Windows\WER\ReportArchive\AppHang_Prepar3D.exe_5b6406aff93b11ca59dcce9bcce363d233eeeb6_a1470430_fc3bcc60-54a3-45b5-b5ab-d7c71cbeaa47

Analysis symbol:
Rechecking for solution: 0
Report Id: b530fdde-67ce-42bb-85dc-637bea130b16
Report Status: 268435456
Hashed bucket: a3089de8a0a2030f7a86bfe93781af72
Cab Guid: 0

It seemed to work fine before the update. The latest crash happened when I was reading the pre-flight check list. How do we fix it?

The FSLabs Airbus was not found in the default Prepar3D Add-ons folder. 

Please manually point to any panel.cfg file belonging t the FSLabs Airbus in the next window.\

This way FS2Crew can locate the proper path to your FSLabs Airbus.

Please contact FS2Crew support if you require assistance. 

I tried to google it myself, but nothing worked for me.

when i set (after engines starting and running) my selector setting on ign/start when i set on normal mode my flaps deployes automatically. How set this in the config menu pls ?

Thanks

Tried out FS2Crew for my beloved FSL A32X’s for the first time and loving it so far (even if it sometimes doesn’t like my Boston accent) 

Have done dozens of flights with it no issue.  Last night-while climbing out on a short hop and using my hide/show button along with popping up secondary panel a few times in a row, I got the XACT.dll crash.  Ran a system scan etc.  some things were fixed.  I do not have ANYTHING on this PC other than stock windows and Flight Sim apps-it’s purpose built-no DRM stuff or anything mentioned in previous (years old) posts regarding XACT CTD’s.  
 

You can see the exact moment of the CTD, what I did before/after in this video (channel is not monetized) @ the 59:00 mark onwards.  

Again-I had done countless flights prior with zero issue.  Only changes I made were some FSL livery additions.  
 

I've got that problem on the FSLabs version of FS2Crew (version 2.1).

All the settings I change in the config menu (setup, callouts, misc settings) are back to default every time I restart the simulator (I'm using P3D v4.5).

Any idea of what to do to solve this problem.

Thanks in advance.

so selecting a visual approach in the APPR settings will blank out the MDA, because there is no on visual approaches. 
Yet I will still have to go through the „Continue“ callout wir button control, which I often forget (and then trigger upon exiting the rwy after landing), because of course I also don‘t have a „Minimum“ callout by the Airbus on visual approaches with no MDA/DH set.

Could this item be skipped automatically when selecting visual approaches or is this not possible?

BR
Stu

a few months ago I uninstalled fs2crew p3dv5 because it kept crashing, and it made me crash p3d, yesterday I installed it again, and the first time I used it, p3d crashes again. in this period I also formatted the PC, but the problem persists

 Thanks!

unfortunately, I have a loss of around 5 FPS in the 320/321SL when opening the Main Panel. After closing the Panel, the 5 FPS will come back.

I‘m using the latest HF of 5.2, I made a complete reinstallation of P3D incl. all Addons, the FSLabs is presently the only Addon despite some Sceneries. I‘m fully aware that it is some kind of digging in the dark, but maybe this is already a known issue.