Gates Learjet 35A

Hello guys, After installing 4.3c everything worked normally, or at least that is what i thought, but im having the same issue again 😕 For instance, no matter what i do, i get no light for the autpilot buttons at all. Ive read lot of avices like the mod in panel.cfg(which it is included in the 4.3c update already), also read about this method on P3DV5, but wont work for me at all.... I will try to reinstall the Learjet and see what happens.... Last resource for now... Any advice will be appreciated...

Hi Folks, Been MIA for a while - I know... Here's an interesting tidbit I recently came across. Nearly 2.8 million views of our beloved Lear on Youtube: Regards, Scott

Hello, my previous installation (v3) gives me a lot of GTN options during the installation process. During the installation of v.4.1A i can not choose between one GTN or two or without GTN. So, at the end I have no GTN in the virtual cockpit. I have P3d v4.2 and GTN complete from flight1. Any ideas? Thank you! Alexander Edit: I have overlooked the new Management Tool. Now you have to choose the GTN options after the installation.

Hi. Help to search a profile PFPX for "Learjet 35A".

Hi- I've moved over to the newly textured Lear from my Falcon. I'm having a tough time getting the spoilers assigned to a button on my Thrustmaster. I tried FSUIPC to do this,(in addition to 'Controls' in P3D) but that didn't work out either. Spoiler ON I think is what I assigned. I also searched here and found a reference to aLUA script ( don't know what that is) that appears to do what I'm looking for. Thanks, Mark

Hi, I execute Flysimware GPS Management Tool as administrator, and choose P3Dv5, but I can not uncheck 2 UNITS, anyone have the same problem?(The same as Falcon50)

Hello, I am in the process of setting up a profile for the Learjet 35 with the Honeycomb yoke and I managed to get all the variables working correctly except the the landing and taxi lights. Do the standard ">K:TOGGLE_TAXI_LIGHTS" and ">K:TOGGLE_TAXI_LIGHTS" variables not work for the learjet? I am wondering if it is because both of these lights are controlled with the same switch. Is there a different variable I can try to make this work? Thanks

I have tried just about every scenario i could think of and yet i still have a auto pilot that will either go past altitude selected or below it .This occurs with any vertical mode. I recently saw a post on here about a wondering altitude to issue . I downloaded that cab to see if that fixed the problem but with no success . In order for me to CAP ALT i have to push the button or it will continue climb or descent is there something i am missing here. p3d v5 h2 , i7 9700k , RTX 2070 Extreme \32 gb ram \ 6gb hybrid hdd \

Hi can’t find any info if the Learjet is vr ready as I would like to fly this aircraft in vr. thanks,jim

Is the Learjet coming to MSFS?

Hi- I notice that the brakes on the 35 engage on landing all by themselves. Very odd. I do have the latest download of the 35 in V5 btw. What setting have I screwed up that would cause thi :>) Cheers, Mark

Hello: I am running FSX with Lear version 4.3c. I love the new sounds! The inverter sound was initially working fine but over the last couple flights I noticed that when I click the switch the sound starts and about 5-10 seconds later it stops completely! Has anyone experienced this? It takes away the immersion just a little but it is quite noticeable. Any suggestions appreciated! Anyone know the file name and location for the sound? ??Al

Hello, I have the above add on when I open it from the add on menu in P3DV4.5 Inc HF 3 far right button of upper bar on screen, it opens a list on black background box first is four aircraft A320 Immersion V2 NEXT 737 V2 747 Immersion then lastly 717 Immersion above this list it says Immersion Packages with live configuration. The another list of A/C below and it says the immersion packages cannot be configured while sim is running, 6 A/C are listed Plus Precipit FX to the right of all aircraft are buttons either red uninstalled or green Installed for Lear 35 but in the upper list B737V2 the corresponding button says READY I have immersion for 737 and Lear…

Hello, Can you advise how in the VC I move Thrust Reverse Levers to actuate on landing, also can I assign a Key/s to provide enable /disable on landing /taxi etc for breaking. Is their a soft key I could use /programme. In Flt deck with mouse I cannot move TR Levers full travel this is right click left click &hold or with the rotary mouse wheel.

Cheers, I haven't flown the Lear in a while and have now updated to 4.3c. Did I miss something or does the altimeter have no QNH / hectopascal option anymore? If not, is there a conversion table which I can stick to the panel? 😁 Boris

Hello, Is it not possible to install Learjet 35A outside Prepar3D v5 folder? I'm really surprised about it as I read a lot of accolades to the developer and his advanced Learjet modelling. So there's no way to keep my Prepar3D v5 installation prestine? Thanks.

I have been using fsuipc registered for quit some time. Never have had a problem setting up axis assignments. Bought the lear yesterday, beautiful jet by the way. Having problems setting up the throttles. The movement doesn't correspond with the physical throttles. Throttles don't start moving until about half way thru travel. Also pulling back will activate reversers. But they jump around, movement not smooth. David

Is this the normal landing light and taxi light for the lear? The white really overpowers the surface and it's difficult to see where I'm at. Is there some other setting I should use? P3D 4.4 learLL by ryan b, on Flickr

Hi Folks, I´m wondering, If only I have this? On ground, when I´m turning on the the recognition lights, they do not illumintate the ground. This is not only when I`m on ground, also on approach at a certain hight, when the landing lights start to illuminate the ground, they don´t show up.... Check out the pictures: http:// (Back) http:// (Front) Cheers

Watching some Medevac Learjet 35's on flight tracking many are crossing the Atlantic and doing other 4hour flights, I can't make these flights are some model of Lears using increased fuel capacity?

Has Milviz mentioned any release date information for the Lear weather radar in P3dV5? Thank you in Advance Bob

Hello, P3D V4.5 (WIN 10 64 BIT I have assigned a key to "ARM" the spoilers prior to touch down, when I select key Spoilers deploy in the air this is not supposed to happen once spoilers armed the usual deployment is caused by the air /ground sense typical via a teleflex cable (old school) from the maim gear under carriage, I followed the procedure by going to the G1000 Soft Key No 6 in the controls menu is this a fault with S/Ware or have I done something wrong. Please advise fix. Best Regards Charlie McEwan

Anyone having an issue with the autopilot not engaging? It's set in the pedestal with "ENG" for YD and AP, but when I punch ENG on the glareshield, I get no lights and no AP. The buttons will guide the flight director, but they will not light up, nor will the autopilot control the plane. Thanks

Hi, P3D V4.5 WIN 10 64 BIT Can you advise why I have the above warning, I tried resetting trim on on ground and flight, warning on all time ground /flight. How can I cancel /fix Thanks Charlie McEwan

For some reason, the 2D Panels (Using Shift + 1, Shift + 2, etc) no longer work. I updated Aircraft to latest version for P3D v4.4 and higher. I am on P3D v4.4. It's been a while since I have flown the Lear, so I don't know what might have happened. Any assistance, tips, recommendations are appreciated. Thank you! ~Robert