RXP GTN 750/650 Touch

Hi there, I'm trying to configure my Duke with the GTN 750. I am able to use the unit in a pop up window. I cannot, however, make the unit display on the VC panel. I have put the "RealityXP.gtn" file in the duke folder under sim objects, and have altered the panel.cfg to reflect the changes that I found in this forum: I have also tried using the RXP panel config tool but with no success. If anyone could be of assistance that would be appreciated. Thanks. -Noah

Hello I have recently purchased RXP GTN 750. It works well with US airports. When I want to flight in europe, I am unable to load LPV procedures. For instance, I have programmed an arrival in LFMU. On the same computer, I have the GTN 750 training and I have already checked that RNAV 27 LPV was available When I use RXP GTN 750 with Prepar3d V3, the GTN only proposes to me RNAV 27 LNAV which does not allow VNAV autopilot landing No LPV procedures available in Europe? I do not understand why because RXP is supposed to use Garmin GTN training on the same computer with the same Nav data 1611????

I recently purchased the RXP GTN 750 and have installed it into Prepar3D v2.5 and v4.2. This is an amazing product and I am so glad that I purchased this unit. So far, I have installed it into 2D Windows for the Lear 45, Baron 58 and Mooney Bravo. Of all the things that I love about this unit, there is one problem that I am experiencing with each aircraft. During flights that require course changes of 30 degrees or more, the aircraft starts preforming S-Turns and has difficulty tracking and locking on course. The P3D standard G1000 that I used before I purchased the GTN 750 did not have this problem. It seems to me that the GTN 750 over responds to course changes gr…

Hello everything, I bought Garmin GTN750 to use with Carenado F50. I have downloaded and see the full screen, RealityXP, with above a white stripe. This one has all the buttons. But when I go to fly then I have the GTN RealityXP screen automatically in a fourth little monitor. No problem but I'm missing the buttons: TRAFFIC - WEATHER and SERVICES. Is that right with flying with te F50? So not, what's happen then? How to config these buttons too? Or is this impossible? Greetings Jopoloco (Netherlands)

Hello I have recently purchased RXP GTN 750 and installed in Prepar3D When I set a flightplan or a direct to and activate the aircraft autopilot, I am unable to couple the GTN with the aircraft autopliot and the aircraft does not follow the flightplan???? CDI is set to GPS autopilot to Nav Did I miss something? Thanks for your help

Hi, in case you've missed it and want to give it a try:

Someone recommended this just-released aircraft to me, but then I looked into it and it is not compatible with the RXP GTN gauges. Is there any hope that it will be made compatible in the future? The Milviz official forum says no, unless I am reading it wrong.Thanks.

March 19, 2018 I bought - RealityXP Garmin GTN 750 (from FltSim.com). My G Data firewall is disconnected and the internet connection is confirmed.Still I do not get any connection to Garmin to download the trainers. Garmin returns the failure code 1603. Can anybody help me to get it installed? Regards Leci

Hello ! I have Problems after re-installing GTN750 . The new installer doesnt work. I got a Message that my account do not match with the product. So I used the old installer from 2016 and it worked. But the link to the Garmin Trainer was for the Version GTN 620-6211 . This does not work with my GTN 750 Version I did an Update with the update tool to Version 1.11 . Do I have to buy the new Version 2.414 to match with the new Garmin Trainer or is there a license Problem with the new installer and my account. Thanks Andy

Hi, I'm pleased to announce v2.4.15 is now released! It is available either via Settings Panel | Check Updates... or directly from our web site. In this update: New: "Audio With Window Focus" option mutes device sound when simulator window is not active. Fixed: GPS Master Device state not saved to the settings file. Enhanced: RealityXP.GTN.ini file management permits manual edits while loaded. Enhanced: User's Manual corrections and additional information. Enhanced: Further stability and performance enhancements.

I own both xp11 and p3d v3.4 GTN 750 licenses. (installed on the same machine) I have X-plane 11.20 with GTN installed. Runs perfectly. Garmin trainer included. I have P3D v3.4. I have unsuccessfully tried to install GTN. I have had it installed and running in the past. Due to issues I have had to reinstall P3D. GTN installation runs through the different steps to finish. However it does not download the Garmin trainer software. It tells me it has installed itself, yet it does not show up in the addon menu in the game. Anyone??

Has anybody succeeded in RXP GTN integration with RealAir Legacy2? Thanks.

Hi there! How can I back up, to later "import" the user waypoints I create in the GTN and also, in the GNS? Where are they located? Thanks in advance, Rafael Carelli

Why is there a limit on user waypoints? I fly on multiple VAs and the number of custom waypoints across these VAs easily exceeds 1000. I have made mulitiple waypoint files and can and do switch between them as needed, but, it would be much easier to have just one waypoint files. Thanks, Danny

Since Meigs Field is closed and Orbx reopened it, the waypoint is not in the nav database. Open the user.wpt file located here; C:\ProgramData\Garmin\Trainers\GTN\FPLN and add - KCGX,Meigs Field,41.8589,-87.6079 In the GTN go to the Waypoint Info page then Import Waypoints.

Yesterday I updated to the latest version and I can no longer access the pop up GTN 750. I have to run the add-on manager, to get it to appear a single time. Once I close the pop-up window - it is gone and I have to repeat the setup process. I'm on Prepar3D v4.1.

Here is the GTN 750 for the A2A Comanche. 1. First backup panel_F1_750.cfg. Download and replace with this panel_F1_750.cfg. With this method use the Comanche 250 Aircraft Configurator_P3D app and choose F1 1 750. Spoiler http:// 2. Download and copy this file RealityXP.GTN.ini to C:\Users\***\Documents\Prepar3D v4 Add-ons\A2A\SimObjects\Airplanes\A2A_Piper_PA24_250_Comanche. To open popup RIGHT click in the GTN screen. Alternate method copy and paste the following in your panel.cfg. Spoiler // F1750 [Window Titles] Window00=Main panel Window01=Clipboard Window02=Mini controls Window03=Payload a…

Hello, I currently owe GNS430 and I am considering purchase GTN750. I am wondering if I can use both gauges to the same aircraft at the same time? Will it cause any conflicts if I have both enabled on one aircraft at the same time? Thanks! Brian

I have gone through the Garmin Guideline for GTN Flight Plan and User Waypoint Files to better understand the nuances of including Departures, Arrivals, and Approaches in Garmin GTN spec .gfp files, which can be imported into the RXP GTN series gauges. I have built a spreadsheet that helps create .gfp files. I have had great success so far with understanding how to construct .gfp files with departures, arrivals, and ILS approaches. Where I am stuck is trying to include RNAV (GPS) Y approaches. Wondering if anyone here can help, The Garmin "GTN Flight Plan and User Waypoint" pdf shows codes for use in gfp files and examples of the codes in use, using approach type…

I am back on the Duke after a bit of a break. All I have done in the meantime is applied updates as they came out for the GTN750. I also installed the new installer for the Turbine Duke for P3D4. Now I find that the autopilot will not fly the GPS route. Initialization of the GTN is fine i.e. OBS 150 etc etc. OBS will respond when selecting a DTO. RealityXP.GTN.ini is untouched - GTN set to Master, "Link" parameters set to True. In other words, everything is the same, nothing changed. However the autopilot simply flies through the active GPS leg and will not intercept and follow. Autopilot is on, set to NAV for lateral navigation. I wouldn't post here a…

Updated GPS, will not follow the magenta line. Can tune a VOR and it works great, heading mode is great. RXP gns 750 shows flightplan, will not follow it. P3D v4.2

Hi, I'm pleased to announce v2.4.14 is now released! It is available either via Settings Panel | Check Updates... or directly from our web site. In this update: New: Added support for Prepar3D V4.2 New: Drag and Drop ini files onto the panel window to import another aircraft settings. Fixed: Using GTN Trainer alternate paths override with environment variables. Enhanced: User's Manual corrections and additional information. Enhanced: Further stability and performance enhancements. The User's Manual now includes detailed instructions to manage the "FPLN" folder in a different way, for importing flight plans and user waypoints.

bought reality xp 750 its in computer , theres a folder for it but each time I open it it goes to manuel ? , can not get it to open so I can install into planes have deleted many time & re-installed with / without virus prob on/off frustrating .........very cool program , I have the 530 installed & works fine please help Phil Hazelton

Hi, I'm pleased to announce v2.4.13 is now released! It is available either via Settings Panel | Check Updates... or directly from our web site. In this update: New: Added support for the latest GTN Trainer v6.41.1 Fixed: Shadin Fuel Data interface fuel flow. Enhanced: Further stability and performance enhancements.

Hello All Last night I was trying to add the GTN625 to the XP GLJ25, but I've come across an bug. If I add the GTN625 just as a window, the aircraft works as I should and I'm able to turn the Radio Master switch ON, but from the moment that I add the GTN to the VC First Optional Panel, the switch is stuck in the off position. Even if I change the power supply for the unit, the problem persists . Has anyone come across such a problem or is it possible that the problem is on my end for not configuring the GTN properly ? Best Regards Nuno Guedes