ChasePlane Support

With the latest build when I have CP run I cannot get the PMDG 747 to initialize. If I quit P3Dv4 and tell CP to NOT run in V4 then run the sim I can load the 747. Experimental mode.

Hi guys, what´s happening in here? In the video you will see that chaseplane works perfectly when the frontend is in visual "focus". When i put FSX in focus i loose control of the camera and it doesn´t work. When i put it on "focus" again it works again!! What´s happening? It was working perfectly until some days ago. There where some updates in this time and now this happens. I don´t know exactly when it started. (I use Experimental version because i have p3dv4 installed too. But the issue is in FSX-SE) Any help? Thanks.

Hey guys, After one of the recent updates, my middle mouse button for panning around the cockpit is not working. It stops working randomly while panning around. If I hold down my middle mouse button, it will only pan for 1 sec, then stop. Maybe after 10 sec of trying to pan around it will work for 1 sec again. Anyone have an idea of what this can be? Thanks everyone!

I sent an email earlier today about this issue as request on CP and opening VFX Central to alpha@.. and support@... I got this after trying the performance of my Sim with my new laptop, when got back to my Desktop this message showed up, I uninstalled everything on my laptop but still getting this alert, how can I fix it?

With the latest build when I have CP run I cannot get the PMDG 747 to initialize. If I quit P3Dv4 and tell CP to NOT run in V4 then run the sim I can load the 747. Experimental mode.

anyone else have a problem with chaseplane not working when minimized to task bar. nothing works until I bring chase back up, then all works well. never had this trouble before. maybe something happened with fsx. I can't get it to move to the front. thanks

I have recently bought chase plane i am in total helpless position as to why i am not able to use chaseplane for some reason, wenever i lauch chase plane the plane sign on the left top corner is red and not connected to p3d, and it blink sometimes red sometimes red, mostly red and that sign should probably be not connected and then the camera and community section are unclickable. i will send some screen shot to if you people can help me out thankhttps://scontent-sin6-1.xx.fbcdn.net/v/t31.0-8/18953441_301562260291926_4816084163440930371_o.jpg?oh=2acf465c397ebbd3bcd7536513f2df7b&oe=599F845A and a small video too - https://www.facebook.com/dishang.perme.98/v…

Hi Keven, V2.85 experimental wont start when Aerosoft Airbus A320 selected. Got the first error, closed P3D, ran CP config then got the second error and wont run with the Airbus. My aircraft cfg file location has not changed and I have full UAC permission Steve First message Second Error message.

I am using Chaseplane with P3Dv4. But have set views via various controllers etc but through Windows(10) and not in CP as I should have done. I now want to delete all my settings and go back to pre-install with CP and start from scratch again. If I uninstall / reinstall are my previous settings/views downloaded into my new install? If so how do I get back to an initial install state? Cheers, Mike

Hello, yesterday I tried to modify some cockpit presets in my PMDG 777-300ER but some of them are not changed by the camera controls. Some othes work ok. If I modify the number next to each control then I get the new preset position, The sliders do not work. Any ideas? I am using windows 10 x64 with the experimental updates but this happens with the stable version as well. Thanks.

Hopefully I can describe this well. In p3dv4, if click on and start using the chaseplane menu (the program itself, not onscreen menu), all inputs within P3dv4 are not longer recognized until I left click back inside of p3d. In other words if I'm using chaseplane in flight, all my controls are not recognized until I click back into p3d with my mouse. I double checked and this does not happen in p3dv3. I do not have "pause on task switch" enabled. I also tried doing some task switches with other programs and I did not encounter the same problem. Thanks for the help!

Hi today i started chase plane and downloaded the new update. But now after the update my static camera appears somewhere in the ocean . Everything was fine before this update. I have restarted the computer to see if that would help . But is the same result the static camera keeps showing up somewhere in the ocean . FSX ChasePlane 0.2.85 Alpha Exp.

I have been lucky enough to get early access to Flightbeams KMSP and what an amazing scenery, one problem is when using chaseplane there is quite a lot of flickering from the scenery, Mir helped me troubleshoot and it only happens when using chaseplane. Any ideas? Here is a youtube video of the problem.

Hello. I'm having micro stutters in vcockpit view with chaseplane active...if i start a flight without chaseplane everything is ok...what to do ?

Hi Guys, I'm using Chaseplane with Prepar3D V4 and really like using the Middle Mouse button to pan around the cockpit. However, this has randomly stopped working even though it's selected in the options. Can you help me to resolve this at all? Thanks!

Hello I am surprised that ChasePlane does not work with P3Dv4 on my PC I have an error message that asks me to wait !!! So why sell a product that does not work? Do you have a review?

FSX-SE CP v. 0.2.85 There seems to be a problem with my setting for - Forward, Backward, Move Left, Move Right. The settings work when I am in the cockpit. When I am outside it only works when I am viewing the Left Side of aircraft - Forward, Rear, Right sides the settings do not work. I am linking two screen shots - one of Presets and one of Preferences https://goo.gl/photos/mCoWWpNdjZzyFYuu9 https://goo.gl/photos/FugCPvC2nkMWLiey9

Hi guys, started P3Dv4 today, made the update for CP. Now I have two problems: - CP tells me that is not compatible to my P3D version - When switching views the picture goes black for a very short moment. No matter which view, inside, outside etc. Best regards, Stefan

Many ChasePlane functions working very well, But TrackIR is not. I tried with alpha 2.5 and alpha 2.79 without success. Ezca works with V3.4 so it appears to me my cabling etc. is ok. I'm using fscuip v5 and LINDA. Can I give any more information about my computer etc. Thanks for the excellent program. Rozel

The previous update repaired the zoom function for me. I was able to change the zoom using the keys I had designated for it. This latest update has the VC load with a zoom of .40 and I am unable to change it using my designated keys.

Hi guys, I just want to report that I cannot use chaseplane in the current experimental version (0.2.74) in the Majestic Dash 8 Q 400. Stadard and Airbus X seems to work fine though. Have a nice week.

I'm trying P3D v4 for the first time now with CS and having some issues: - I feel input lag, when I use my hat switch, it have a delay and the movement is glitch - using space + scroll to change the zoom, I also feel glitches and some input lag - I don't see any head shake, even if I set the weather with strong wind etc I'm using the 2.5.0 alpha version

Many ChasePlane functions working very well, But TrackIR is not. I tried with alpha 2.5 and alpha 2.79 without success. Ezca works with V3.4 so it appears to me my cabling etc. is ok. I'm using fscuip v5 and LINDA. Can I give any more information about my computer etc. Thanks for the excellent program. Rozel

Not sure what is going on but CP starts with the sim but the camera is gray out it does start with the sim any suggestions?

I installed P3D version 4 last night, as well as VFX Central and then ChasePlane. It worked beautifully for me in v3, and I was excited to continue to use it in the new simulator. However, I'm running into issues, having the same issues in both CP and VFXCentral. As you can see in the screenshot below, it isn't picking up my v4 install, or letting me set it manually (note that the reason I'm getting entries for v3 is because of a registry editor so I can install some v3 products I purchased into v4 until they are updated). I'm having the same issue in CP, which then isn't picking up the simulator. I have all the simconnects installed, alpha versions of CP selected, and ju…