RXP GTN 750/650 Touch

Xplane 11.32 for windows I am having two issues that I haven't been able to solve. First, if I change transponder code in the RXP GTN750, it doesn't update the default transponder that is on the plane. More importantly, if I select the option "Connect CDI Mode to NAV/GPS switch" and then I have GPS on the autopilot, the HSI CDI needle starts going back and forth between the GPS course and the NAV1 course. If I don't select the option, the autopilot NAV mode doesn't follow the GPS navigation when I select GPS on the 750. Help would be greatly appreciated!

I think he is not making the most of these fantastic instruments. I use only 750 for the navigation, I read about people using one 750, for navigation and other for checklist, and some one the 650 keep it for TICAS! And which configuration do you fly with?

HI Jean-Luc. Now, in order to get the 750 to start up, I have to start X-Plane as Administrator. Do you think that if I reinstalled the Trainer and the GTN750, that I wouldn't have to start as Administrator every time? Just wondering, are you planning on attending the FS EXPO this June in Orlando, FL? Thanks a lot, Howard

Hello all, I have looked for the answer to this in a few places already, including asking RXP directly, and so far it has not yielded a definitive answer... Can anyone with actual first hand experience please confirm whether or not the touchscreen interface of the latest GTN 750 that is embedded in the 3d cockpit model works with the x-plane 11 native VR 3d mouse pointer yet? I have found threads where it suggests the VR touch controllers now work for the embedded in cockpit GTN 750 interface (as opposed to the popup window), but I have not seen a specific confirmation that this also works with the 3d mouse. I would appreciate a definitive answer one way o…

Hi, Does the VNAV on the GTN work with the Citation II and other aircraft with VNAV on board?

I'm not sure if the gauges have always been this way or something changed in XP....but the gauge clarity on the screen is vastly reduced compared to the 2D. Of course the 2D popup was always sharper but the difference is greater than before. Is anyone else seeing this or am I doing something wrong? Here's a pic... I do run only High texture res in XP....maximum kills my video ram... Maybe that's a factor? gtnvc_blurryXP by ryan b, on Flickr

Howdy everyone, I'm trying to bind my controllers to control the 750. Some things work, as I found the datarefs for CDI, OBS, DTO, and some others, but how can I trigger Zoom In/Out, P Flight Plan, MAP? Also, I can control the GTN in VR, via the pop-out window, but not the screen embedded on the panel. How do I resolve this? Cheers, Sterling

So I'm flying at night in TEGBS Orbx, I have bought almost all the XP11 airports from Orbx, and I depart from EGHR and head along the coast and land randomly at EGUM? Screenshot attached. I have my GTN set for Worldwide database. There is no reference to what is on the ground a major airport. Is there something wrong with my database?

Hi, I Purchased the GTN750 for Xplane on 11.30 and I have installed the trainer though inside any A/C the GTN750 just presents me with this http://prntscr.com/noqbb0 I've adjusted the Security permissions for the Garmin Trainer Folders etc even after starting the Trainer from Garmin and the GTN750 appears to work just fine in the trainer though not in the sim. In the User guide I show De-Bug Files etc should be in documents RXP folder though I have no Files In there with logs Help is Appreciated

Hi guys! Carenado did something unexpectedly expected and added the GTN 750 to the virtual cockpit of version 1.2 of the Premier 1, removing one of the dual default FMS' to do so in the process. My question is, seeing as how the assets now already exist in the cockpit, how hard would it be to modify the plane to remove the second default FMS located right next to it and place a second GTN 750 in the cockpit? Thanks in advance!

I used the GTN750 very well until recently. However, after changing the Windows 10 account, the GTN750 will not work. I have erased it and reinstalled it, but it is still the same symptom. I've reactivated the key. It also attempted to initialize from "SteamLibrary\stemps\common\X-Plane 11\Output\preferences." But it still doesn't work on XPLANE11. I need your help.

So recently I purchased the GTN 750 to go with my Carenado S550 . Originally when i first installed it work like a charm right out of the box and into my S550. Unfortunately i had to reinstalled my XPlane do to a corrupt scenery install. So i started from fresh again and reinstalled Xplane, followed by S550 then GTN750. Now my GTN 750 would no longer work with S550 or even by itself. The screen is black and it no longer even pair with the aircraft. I have tried uninstalling the GTN , three times already and reinstalling. I am not sure what to do at this moment since I have googled and tried everything i possibly could have done. I am including a file of the logs. If anyon…

Garmin Flyer, Nice work. During the install of the GTN-750 trainer, there are options for running with different control displays. Can any of those other displays be used for the primary in front of the pilot?

Thinking of moving from the G530 to the combination of the GTN 750 & the 650, and would like to get some input about touch screen for those two Cheers Yair

Since a week none of my planes pick up the glideslope on any RNAV/LPV approach using the GTN750. It is probably either a fake-pilot error, or something is wrong in my setttings, but I cannot pinpoint the problem, so I'm asking my fellow simpilots for help. I load and activate a LPV approach in the GTN750 (various fields and planes attempted, Carenado Baron with REP and F33A with REP mostly). I get to the IAF in NAV mode, the plane follows the horizontal path without any problems. I descend to the published intercept altitude and then arm APP mode on the autopilot. I see the G/S indicators moving down, but when the plane should start to descend to follow the G/S it …

Hi, I Purchased the GTN750 for Xplane on 11.30 and I have installed the trainer though inside any A/C the GTN750 just presents me with this http://prntscr.com/noqbb0 I've adjusted the Security permissions for the Garmin Trainer Folders etc even after starting the Trainer from Garmin and the GTN750 appears to work just fine in the trainer though not in the sim. Help is Appreciated

Hello, Do you plan a G1000 Development in a near Future (Weeks or Months) ? I'm searching a solution to replace the G1000 on XPlane 11 of my C172 & C182 by a better solution. Waiting for your answer Kind regards

I admire the work you guys do on these. Wish I could do it myself. Kindly request someone make one for the X-rotors AW139. Would be happy to tes, supply files and donate towards the work 🙂

Hi everyone, In the past three days (starting 6 April 2019), I've downloaded the following: Garmin GTN Trainer 750 (v6.50) -- I downloaded this separately before downloading X-Plane and XP Reality Plug-In X-Plane (v11.32.r2) XP Reality GTN 750 (2.5.15) I have a Dell Precision 7520, i7-7820HQ CPU @ 2.90GHz, 32GB RAM, 4GB graphics memory running Windows 10 Enterprise. X-Plane and the Garmin GTN Trainer both work fine as stand alone applications - no issues at all. However, when booting the Garmin 750 XP Reality Plug-In with the default C172 in X-Plane, the following occurs: 1. Garmin 750 window comes up, my name appears that says it is lic…

This has to be the most frustrating experience in over 25 years of flight sim,lots of hours wasted uninstalling ,updating reinstalling, reading post after post , so many different answers that just dont work. Please can someone give me a definitive answer as to what is the correct folder to store flight sim plans in so i can import them into the GTN 750 like i can with my GTN 750 in P3D. I have the latest version of RXP GTN 750. I sen that i should have a folder GTNNAVDATA but i cannot locate such a folder. Cheers

I recently upgraded my hard drive to a SSD. Unfortunately, when i open RXP GTN 750 in X-Plane i get a Invalid License Message and the GTN 750 locks up. Could someone please help me out? Regards, Bob

More and more planes are coming out with the GTN750 built into the panel. There is a problem with that for VR users. In a floating window like AVItab or the GTN750 when it ISN'T built in, there is a blue laser beam that comes from the controller any time it is pointed at the window. That makes it very easy to select things - you point at them with the blue laser and pull the trigger - boom, selected. But when the GTN is built into the panel, there is no blue laser beam. If you pull the trigger, there is a green laser beam which shoots out. If it happens to land on a button, that button will be selected. But you have no idea if it is going to land on the desired button. I …

Hello - I noticed that the majority of the flight plans I attempt to import into the GTN750 contains "locked" waypoints, which then don't allow the flight plan to load at all. However I can load the same flight plans into the GNS 530 just fine. Does anyone know how to unlock those waypoints, or at least allow the non-locked waypoints to load into the 750? Thanks!

Hi, I am using Reality XP plugin for GTN 650 in Xplane version 11. Reality XP team has done a marvaellous job, in this regard. Well, my requirement is to take or extract waypoint parameters (Waypoint name , Distance from current position to that waypoint and Heading to reach towards it) entered from Reality XP GTN650 GUI. Is there any method to extract these parameters? Kindly give me reply with suitable solutions. Thanks, (SAIM UL HAQUE)

I've passed the e-commerce email test procedure but when I try to download the software it says something is wrong ... try again. When I started the process I noticed that I downloaded a new version of the download process installer maybe v 1.4. I'm not sure but I really want the features your website touts to work with x-Plane 11. I'm a newbie with all the simulation software but I bought the software to refresh my instrument flying skills from over 30 years of doing other things. Can you help. BTW, the x-plane 11 is on a new windows 10 with what the kids call a beast configuration. i have 3 monitors and bought a 4 monitor touch screen for the avionic pac…