RXP GTN 750/650 Touch

Hello, Any thoughts on this? The file C:\ProgramData\Reality XP\rxpGtnSim32.dll is infected with Gen:Suspicious.Cloud.1.@F8aaqlib8li and was moved to quarantine. Cheers!

I got a fault -2147023504 when install it, and couldn't start the Garmin Trainer Installer. I run the installer as administrator but the same happen. Any suggestion? Thanks in advance!

Wondering why developers dont have the combo for the GTN 750 and 650 together for the AC that come with the gtn750 for some of the GA AC like the ones from Carenado and Alabeo. Is there an easy way to replace the Garmin 430 with the 650?

My GTN 750 runs normally in my sim with the exception of with the AFLs KingAir350. When loaded in the KingAir, the rxp options window cannot be opened from the plugins window and the GTN is restricted to the Garmin database. Odd, since the GTN is set to use the jep worldwide data, and does so in other planes. I wonder if there is some sort of conflict with AFL's xjet plugin (wouldn't be the first!). All updates for the RXP. GTN trainer, and KingAir are up to date as of yesterday. Anyone else with the AFL King Air have this issue? Load it up and try to enter a European airport into the flight plan. A manual edit of the ini will overcome this. But hopefully the …

Dear fellow simmer, I recently purchased the GTN750 for X-plane 11 but the installation kept me busy for hours without any result but frustration. When installing I get an error message that 2 files are corrupted. rxpgtnsim32.dll I searched in the directories but the file isn't anywhere to be found. I don't have any firewall, Antivirus on or anything. Even Windows defender is off and the .exe file is whitelisted. I don't understand what is going wrong so help is much appreciated. On top of that, the installation (reinstall option) locked me out due to too many logins. I did reactivated the key, but I still get a 'try later' message. I…

I have successfully installed the GTN750 in my Carenado Baron 58 and it is working fine. I am having an issue while installing in the Carenado Bonaza in Xplane 11 where if I choose "show window" the pop out works great and I can resize it and put it somewhat close to where is goes but the static window on the dash is blank. Any help would be appreciated. Thanks!

New to product so unsure of update procedure. I purchased this about a week ago. After an install, uninstall, re-install I got rid of the black screen issue somehow. All was fine and my database was 1809. I noticed there were no charts outside of the US, so I found some instructions here in another post outlining a way to possibly get the databases from a older trainer, so I found it, and installed. All was fine after installing that older trainer, gtn was still up to date, and my data base was still 1809. I was unable to follow the procedure, so I gave up on charts outside the US. Today I installed the updated trainer through the ecommerce re-install, and all …

just got notice and downloaded update got two installer files there named rxp gtn-750-xpl and rxpgtn-650-xpl own both gtn 750 and gtn 650 for xplane from reality xp am thinking since are marked xpl there for xplane versions as in going thru process did not see chooses for p3d only xplane are these updates going to be made for p3d versions to? as also have both gtns for p3d , is there a page somewhere with instructions on how to properly apply updates? as no instructions seemed to come with the updated installers, does old versions need to be uninstalled b4 applying updates and if so will uninstalling old versions uninstall the trainers also will trainers need to be rein…

I was in the process of buying but hesitated. I fly Xplane on pc and on my laptop. If I buy the 750, am I able to use the 750 on both for one purchase?

While flying the Carenado S550 Citation; using the RXP GTN 750 I am unable to get the V NAV to fly the altitude constraints as indicated in the flight plan. When I disable the GTN 750 and instead use the stock X-Plane FMS the V NAV works fine. Is this plane capable of flying V NAV with the GTN 750? Regards, Bob

After purchasing the GTN750 (and GTN650), I found that during the installation it gives you a 404 error for the trainer. So you have to cancel the installation, click each and every link below (provided by RXP) and save them all to the same folder of your choice, then install each one, one at a time. After installing all of them, you then run the RealityXP installer again and it installs without errors. For me, I then launched XPlane and my aircraft, went for a test flight, briefly checked on functionality and all seemed functional. Hopefully I did not miss something? One thing though that I have not been able to decipher from the forums as of yet is how to updat…

Hi. I'm having the exact same problem. How do I run it as admin? All I have is a black screen

With so many versions and issues floating around out there with regards to versions and changes with them, I am not sure which to follow, so I am hoping someone can help me without redirecting me as I have read the manual and the forum topics and I am still at a loss. Using the versions in the links, how to get the GTN Catalog to find/view the .gfp files? I read the manual, following the steps on page 9 “Flight Plans and User Waypoints” and no luck. I tried to create a FPLN folder in c:\programdata\garmin\trainers\databases\FPLN, I also tried the alternate instructions creating a shortcut, neither work. It does not see any .gfp files, including the KSLE provided by RX…

Hello I have been unable to install the gtn 750, the forum support has lead me here, I have read many pages of help on the product but unfortunately my knowledge in these matters is limited. I don't want to waste anybody's time as I feel I have done what I can to get this product to install but with no joy, I tried to fill out a contact form on the reality xp website but even that refused to work as I am apparently in the wrong domain! If there is anyone here who is able to point me in the right direction to at least get a refund that would be appreciated.

I just purchased and installed the F-35A. It comes equipped with the X-Plane G1000. Unfortunately, while flying with the GTN 750 the LOC must be selected at every waypoint or it will not follow the flight plan. Additionally, If I disable the GTN 750 and try using the X-Plane G1000 I cannot change the NAV SOURCE in order to capture the ILS. Normally, I would re-enable the GTN 750; touch the CDI key to toggle navigation source and disable the GTN 750 again. Unfortunately, this not only does not work, it deletes the X-Plane G1000 flight plan. I have reviewed the RealityXP support forum and discovered similar issues regarding the X-Plane G1000, but no recommendation…

Hello, I've just bought the GTN750, but when I launch the e-commerce installer the installation can't get throught (error 404) because of an internet issue... but I have internet wokring well.... Can someone help me ? Thanks, Theo

I recently bought the flight factor a350 and the gtn750 doesn't integrate with the systems on the aircraft. Are there any payware airliners that work with the GTN?

Ok i'll try to explain the best I can with everything I have done so far. 2 days ago I had updated to the latest version by using the auto updater in the start menu. As soon as the update had done the GTN750 would not show up on the 3D panel of any aircraft, Payware or otherwise. I then uninstalled everything to do with the GTN750 downloaded the installer again from the website and reinstalled, and nothing the 750 would only display as a 2D panel and would be completely black no buttons working, nothing. I then uninstalled XP11 and started with that again and ran through the same process as above and again, nothing. I then contacted Laminar who pu…

Hello. I installed the GTN Trainer 6.50.1 last week and now it seems the autopilot in X-Plane 11's G1000 (referred to as the X1000) will no longer follow the sequential fixes in a GTN flight plan. The plane will start to make the requested turn, but suddenly levels out and will only fly straight. If I notice this and click once again the NAV button on the X1000 it will immediately head to the next fix, but won't make any further turns without me clicking the NAV button once I see it's not working. If I manually enter the FP into the X1000 and do not launch the GTN the plane follows the FP as expected. This is X-Plane 11.35 on Windows 10 Professional flying the …

I downloaded the trainer and the database but now xplane keeps crashing on start up.

Hi guys I read every topic about missing button. I done every step so far but still is not working. I want love the product but: - no charts or procedure in Europe and data base is from 2016. New one doesn't work. I got black screen. - ok then if I use Little Nav I can create and if needed modify, but no because there is no import button. If I can I can copy everything from other similar topics what I have done so far. My weekend is nearly done and I was so looking forward to fly with my 50$ new avionics but instead I spent hours around 13 so far to resolve this. Reinstalling at least 30 times with different data base. What I real…

Hey, just bought the GTN750 today and trying to get it working on the Jetstream 32, but when I select the GPS mode by clicking the CDI button this flickering starts https://i.gyazo.com/afc463e295287aef87a3a8799d6f1739.mp4 and I cannot activate the NAV on autopilot, tried various settings on the settings menu but didn't get it working. So if any1 knows how to get it working without flickering please let me know :) VLOC mode works without problems.

Hello. I love this fabulous GTN 750 and hope there's a remedy for my (small) problem. I like to popout the window and have it displayed on a 2nd monitor and sometimes I accidentally right-click on it and 'POP' it's gone! Is there a file I can edit or a configuration to prevent this? There's a lot of right-click-hold-drag action in X-Plane (change camera view, etc.) and in moments of pilot workload, I sometimes forget NOT TO DO THAT in the GTN. Is there a way?

I bought GTN 750 but out of the box it doesn't work with Premier 1a, correctly it doesn't work for default planes. Not sure where is the problem.

Hello there! I wound like to ask your help for the problem i have try to install RXP GARMIN 750 to X-plane 11. I download the file form Flight1 , i try to execute the setup but i get an error 404 file not fund . Please let me know what i needto do . Thanks a lot community