FS2CREW: PMDG 737 NGX REBOOT

When I load my PMDG 737 into a free flight it always goes into 3d cockpit view instead of the 2D which it states it needs to boot up in. I have the setting to load it up in the 2D cockpit but it still won't do it. Even with my keys I assigned it still won't open FS2Crew and I have run out of ideas to fix this issue.

Attention FS2Crew 737 Reboot Drivers: I just released Version 1.8 for FS2Crew PMDG 777. Now the path is clear for me to work on the next big Reboot 737 update. Note: UGCX is being developed in parallel by a separate team, so work on it is unaffected. Best,

I've already done a bit of research and I think I know the answer to this question, but as a prospective buyer of the NGX Reboot edition I wanted to confirm - am I correct in understanding that it's not possible to have a lever or button assigned to the mixture axis when running reboot? My understanding is that a mixture axis assignment makes it impossible for FS2Crew to read the fuel cutoff switch position. If this is true, then I have a couple of follow-up questions: -- Does this constraint apply to FS2Crew editions for other aircraft, or is it unique to the NGX? I haven't found references to it in other FS2Crew documentation but wanted to make sure I'm not mi…

Hi all. During circuit training for touch and go in sop 1, reading landing checklist, in paragraph speed brakes i answer ''not armed''. After these words checklist not continues. Why? If the answer ''Armed'' checklist continue. Do everything by the manual. Thanks.

I would like to ask a question, when I am near landing at let's say 2000ft and speed almost near ref speed let's say 147KT and having Flaps 15 and gear down, calling flaps 30 the program answers "speed check flaps 15" without extending the flaps. Why? What am I doing wrong?. I am using SOP1. Thank you very much Pericles

I noticed that the First Officer calls for various check lists but I assume that me - the captain - still has to make the changes,ex Fuel Pumps off,landing lights on/off etc etc Or is it possible that the FS2Crew program does it for me ? I do not think this is the case but I just want to confirm. Thank you H.Werni

I only work with FS2Crew since a few days,therefore my question may seem dumb. Like the title says,I select Ground Connections and then I see a message in red: No Audio link. The question is how can I obtain the Audio link ? I imagined that I have to connect to the airport ground frequency ( in my case Zurich,with 121.90 and 119.70 according to Navigraph ) and I should get the Audio link. Can anybody explain me what to do and where I am wrong ? HerbertWerni

I'm wondering if there is no way to get the FO to dial in a course on either side? After all, there are commands to ask him to set altitude, heading and speeds, but I can't get him to set the course? I've also used FS2Crew for the Dash-8 Q400, and there the commands "Set course on my/your side XXX" are available, but they don't seem to work in the 737? Are there any such commands, and if so, what are they? And if not, why not?

Hi there I'm having a small issue in p3dv3. For some reason when flying on vatsim I have my ATC coming through my headphone/mic combo and reboot through my desktop speakers, but oddly my mic is transmitting to fs2crew when anyone speaks in my headset on vatsim. I'm pretty sure my headphones are not loud enough to trigger the mic as I had no such issue in fsx. It's like my headset audio is being transmitted to the mic. Any ideas would be appreciated.

I have tried both options to get rid of the SDK error message. I use the default trike and then open up the PMDG 737ngx in 2d cockpit mode. I am not sure what saved situation files are though. I just have my panel default set to NGX cold and dark. That is the only thing I have. What else can I do to fix this?

Hi I would like to know if this headset is good enough to run fs2crew ngx reboot voice control. These are the features. KOSS CS95 communication headset USB plug. Headset with electret, noise-reduction microphone for hands-free communication from PCs. Freq resp: 30Hz - 16kHz. Ideal for PC voice applications, interactive gaming & speech recognition. Dynamic element for extended frequency response. Foam ear cushions for open, hear-through sound. Over the ear. Adjustable headband for a great fit.

Bryan, although unfortunately at the moment I don't have much time to fly and to practice failures, just out of curiosity, do you have a forecast for the release of an update of Reboot including Emergency? Thank you and Merry Christmas!

Am I the only one that doesn't like the US captains voice, he sounds like a machine, too articulated. Cabin crew voice no good either, it sounds rushed, I never use the US voice set with SOP 1. I like the old voice better. I always use the UK voice.

Hi Bryan, i have a big problem. I flying with Voice Controll SOP2. After i say preflight checklist please comes the problem. not always on the same time. The FS2Crew say PACKS OFF. I don not say anything. Nothing. Sometimes the problem comes very often . The PACKS switch off. I must turn the Packs on many times on the Ground or in the Air. In the green Bar i can see the Word PACKS OFF...... when i have the headset with mute. i cant understand this because the command comes without speaking and Mute. The log file shows alsow the line Packs Off (Captain) At no time a speak this. I love the fs2crew.............when it is running ..... Sorry…

Hi, I've recently installed FS2Crew NGX Reboot for use with Prepar3d v3.1. I'm getting the SDK error when opening the Main panel. I have followed the advise in the Ops Manual regarding this error in FSX ie. Uninstall 737NGX, delete files in simobjects folder, reinstall 737 NGX but the error is still occurring. I have searched this forum but can not find any solution. I would be grateful if someone could help me out.

Just wondering why the landing lights on descent are always turned on at 12,000 feet rather than 10,000 as it states in the Button SOP 2 tutorial page 25..

Hello guys. I am probably just dumb... but when I start the PF events... FO is not turning on the battery and APU/GPU. Do you know how to fix that? Many thanks :-)

Hi I still have this small problem. If I'm using SOP2, everything is fine. I take off, but i can't seem to go from "Initial Climb" to "After Take Off Checks" . If i scroll on to "After Take Off Checks" and I call for this, the FO calls out "Standby". That's all I get. Later in flight I go to "Descent Checks" and everything is fine. I've just tried it again and the same happens, "BUT" if i change from SOP2 to SOP3 in flight, like i just did climbing through FL100 as a test, it works. Also today, I was in SOP3, flying to Portugal. Everything was fine, but i could not get "Landing Checklist to Flaps", I was on a VOR approach. Everything after works fine. …

I have an ongoing problem getting the speech recognition to accept the spoken word "before". All the other checklists are no problem & work fine, but all the ones that start with the word "before", I have to say multiple times to get recognition. This is most annoying. I have followed all the voice training routines & tried all manner of ways of saying the word without success. Does anyone else have this problem & have they found a solution? Otherwise this is a great programme. Tonym

Looks like FS2Crew uses the default playback device selected in Windows for all sounds not going through the headset if you selected one under the SEC-AUDIO and enabled the HS feature but if I like to change the playback device in use while the simulator and FS2Crew already is running is that possible? I tried simply selecting another default playback device in Windows with the sim and FS2Crew running but that didn't make FS2Crew use the newly selected playback device so guess it will keep using whatever playback device was selected as the default playback device in Windows by the time the sim/FS2Crew was started. Hence my question in the topic, is it possible to …

Is is possible (for the next 1.2 version ?) to add a "save state" option ? so you can save your (long) flight and the actual fs2crew state.

What is the purpose of this command? I am assuming you would have the departure runway ILS tuned in case of an emergency return and you are placing the navs back in auto tune ?

Hi, first I love the new FS2Crew!! Problem my FO did not turn flaps up after landing. clean up works great but the flaps still in Ldg position at the gate. Greets Ben

I have done 3 flights and the only thing that doesn't seem to work in the button control version is the FO setting the RTO braking during the before taxi checklist and also auto braking during the descent checklist. . Is there something I am doing wrong?

I have ticked all the boxes for call outs of the final landing altitudes, but don't get any call outs. All other replies etc as per the book. I tried replacing the call outs with those in the pmdg set up but those don't work either. Are the two programmes cancelling each other out, or am I not doing something right on the approach? Any suggestions appreciated. Tonym