FS2CREW: PMDG 737 NGX REBOOT

Hi, Aircraft PMDG 737NGX SOP2 Button Control Flight phase: Descending Flight Level: <10.000 F/O Flow: set fixed landing lights to on and set seatbelts sign to on is not always performed by F/O. FS2CREW Configuration for fixed landing lights is set to: 10K FSX Unit of Measure is set to: Feet Any one experienced the same problem. Kind regards

Hi all, Have a strange and on random error. When I ask to start the engines (say start engine 2) Fo puts the start switch on GRD, but calls immediately "starter cutout" and then when I ask start engine 1 I get the same result but he also starts the rest of the start up procedure with out the engine nr 1 started. After that the whole thing is a mess and cannot be repaired. This happens about 80% of the time. What do I do wrong or what can I do to prevent this. Pieter Veelo

Hello, After arriving at Svalbard (temperature 0ºc, and light snow) with wing and engine anti ice ON and flaps 40 used for landing, the F/O puts the flaps at 15 degrees in the after landing flow. Is this a normal situation? Shouldn't he rectracted the flaps to the UP position, or leave it fully down ? According to Boeing FCOM The Cold Weather Operations Supplementary Procedure in the Boeing FCOM specifies how far the flaps may be retracted after landing in conditions where ice, snow, or slush may have contaminated the flap areas. If the flap areas are found to be contaminated, flaps should not be retracted until maintenance has removed the contaminants.Why p…

Hi Bryane, I hope it was not already mentioned before. In SOP 1 when I request to start the APU there comes no call "APU is avaible" when the APU is avaible like in SOP 3!? Best regards, Holger

Good afternoon, I've noticed a few timing problems on the product. First thing you should now is that I fly with SOP 2 , and that I like to do the preflight on my own( I just use the FO to do the checklists). Everything is ok, untill I get to the Before Start Checklist. When I ask for this checklist, the Fo starts to do the Before start Procedure( Fuel pumps, and so on), so I just have to wait for him to get his flow done. Another problem is when I'm taking off. At this momment, the FO says 'V1' too late. He should say that at 'V1 - 5'. Thanks.

Unlike some other on-line services, PilotEdge mirrors real world operations and requires mode C at many airports, and encourages use at all airports. Per AIM 4-1-20 a.3 (page 4-1-15): "Civil and military transponders should be turned to the 'on' or normal altitude reporting position prior to moving on the airport surface to ensure the aircraft is visible to ATC surveillance systems" Since this change implies that the ASDE-X setting is ignored, what steps should I take when I fully intend FS2CREW to turn on the transponder before taxi and keep it on until I get to the gate?

Hi, since I installed FS2Crew Reboot I'm suffering from strange Errors. Most of them are Stackhash errors and sometimes there are OOMs (even in a performance friendly sourrounding). I'm not 100% sure if this is related to FS2Crew, but before I installed FS2Crew I could fly without any problems and CTDs. I love FS2Crew Reboot, but this is annoying. Any suggestions? Phil

Good evening Bryan, I encountered a very strange issue that I have never had before.I use P3Dv3.0 with NGX, Reboot and Radar Contact 4.3 When I run Reboot, some sounds on RC and ALL other external soundstreams such as YouTube, LiveATC and Spotify are blocked. I can hear only P3Dv3.0 sounds, NGX sounds and Reboot sounds. If I use any other aircraft without Reboot, I have no problems. Somehow, Reboot blocks the external soundstreams (RC4.3 is an external soundstream as well and I can hear either a pilot or controller or visa versa). P3Dv3.0 settings - Logitech G930 for all 3 settiings. Reboot settings - Logitech G930 as a primary device. Other settin…

Hi!! I had Reboot working perfectly until I upgraded it to 1.1. Now it doesn't play the departure brief and the FO doesn't answer the checklists!! It goes well until the Preflight Checklist, then looks like locked. Help,please. (Cfg is voice-locked, headset on, OPS2...I think I've checked everything) !!!! Thanks

I like to run FS2C in an undocked window. Last evening I had a flight from EWR to RSW , I moved the undocked main panel over to the FS screen and went to re-dock, it immediately disappeared and my mouse cursor changed from the usual pointer icon to the round spinning circle. I was unable to re-evoke the main panel and it was no where to be found. The mouse cursor spun the rest of the flight and my frame rates went from the upper 20's down to the low teens. This happened when I called for the Descent Checklist. After the main panel disappeared I was able to issue commands which were being interpreted (the appeared in the green info bar) but the 'FO' didn't complete any a…

Hi, I just bought FS2crew PMDG 737 NGX REBOOT. OS is win 7 pro (norwegian version), and I can't get the speech recognition to work. Any ideas how to get this working?

Hi, I've noticed that the hydraulic pumps are left on during the shutdown procedure, then not caught by the Shutdown Checklist. Martin

Hi Bryan, thank you for the lates reboot version! As usal great work! I have a request. Seems that you have connect the fs2crew panel light to the NGX light. Do you see a change to add this one as an option? The reason I´m asking is because I also use the NGX light during daytime too (like in real world). So the FS"Crew Panel is all the time in night mode ... Thanks and best regards!

Just noticed after landing at ESSA on a short hop from EKCH how the FS2Crew FO didn't start his after landing flow although I have the setting in the topic set to 'YES'. He did start the after landing flow though when I spoke 'OK to clean up' Haven't seen this issue before, maybe a 'one-time-only' type of thing with some luck or did anything change in this regard in version 1.1?

Hi Bryan, thanks for the 1.1 update. I just have 2 issues that require assistance. 1. I've tested this twice now, and it appears that when I request the FO to turn on his Weather Radar via the Approach Brief page, he turns on his Terrain Radar instead. This was the same in Version 1.0. 2. Also, when FS2Crew controls the Cargo Doors, the doors are opened only momentarily (ie several seconds) and then the doors are closed again. This becomes an issue when using GSX.

Hello! I am having problems with my approach checklist with the new NGX Reboot, I keep getting a Play Brief (incomplete Data) message with Final approach fix alt., Minimums (DA) Baro, and Missed Approach Alt. I dont have a clue on how to correct this problem, PLEASE HELP! Thanks in advanced! Andre' The words are in RED color

Brian, May I assume that the current installer at FS2Crew store is P3D 3.0 ready? Thanks

Hello, In the ten checks (approach phase), when passing FL100, i say "FL100 desceding altitude 4000ft" (the MCP ALT), note that the transition level is 5000ft in this case. The F/O replies "Flight level 040 checked" Is this a mistake? below the TL, the altitude is said in FT and not in FL Regards

where can we find the link for updates, im still at 1.0

Hi, I have the NGX Reboot...however on RAAS Pro, I have the 737ngx loaded and the RAAS says Airbus...so I unlink it..don't have Aerosoft Airbus installed now but I try to selct 737ngx and it won't change and it says current model...(and Airbus re-appears) any ideas how to correct this.... Thanks, Bob Morehead

i have pmdg737 on a win 7 computer using p3d v3. i have tried all the steps mentioned in the forum. i have checked my panel.cfg file and fs2crew is there but when i open up the panel it is still all black. i have un-installed and re-installed both 737 and fs2crew with the same problem. any thoughts on this. thank you. sorry meant black not vlack.

My F/O turns on the fixed at 15,000 ft instead of 10,000. Does anyone else have this issue?

Is there an update available for P3D v3 installation? PMDG installer has been updated already.

Hi, everything works and checklists and actions are completed by the FO. However when he replies or talks my sound goes quiet and I cannot here his response but he does do the actions requested. I have tested headset and speakers and they are all correct. Thanks.

Hello I have installed fs2crew reboot and when I try to launch fs2crew configurator it wo'nt launch and I cant activate fs2crew. what can I do I use windows 10 64bit and P3DV2 and the PMDG 737 NGX for P3D