The Official DX10 Scenery Fixer Support Forum

Hello While using Great software SteveDx10 Sceneryfixer, any list of commercial aircraft which support VC shadow,? would be appreciated.. i tested personally: PMDG 777-200 >Negative! PMDG 737NGX >NEgative! Dash8 Majestic >Negative! CaptainSim 737-200 >Negative! CLS MD82 >Negative!

Steve, I've installed version 2.3 and included the missing file before installing the libraries. The install never gives me the check box option for DX10 Compatible Reflections. The other 2 options are there. Under the Legacy tab, the DX10Compatable Reflections Enable button isgrayed out. Normally a grayed out option means I already have something installed but I can't recall adding anything between 2.2 and 2.3. I've uninstalled the libraries and let Control Panel uninstall it. Went back to 2.2 and then back to 2.3. Same results. Tried this several times. Also replace the ShadersHLSL directory with the stock version. Deleted the cache and let FSX rebuild it. This was a …

Just learned that the software has been removed from FSS. I purchased this software and now it is gone? no more updates and i can't even download the last update released? This is not cool. do I have any course of action? whew!! just saw that i could download when logged into FSS. disregard post.

Hi Guys, can anyone tell me what are good settings for the DX10 Scenery Fixer? Regards Flo

Hi, first i should say,the scenery fixer is a great software,thanks about that, ,i have a problem with sun after switching to dx10,there is a large box around the sun,at day or dusk ,always,there is large box ,how can i fix that? thanks

Hey guys, have a GTX 670 and setup FSX and Inspector according to the "DX10 How-To" guide .pdf and I am not sure what to change to get the jaggies if you will off the displays. They look good when you pop them out and make them large, but in the bezeling they look a little like AA or AF might be off or pretty low. I have attached a photo but they look good in the picture, trust me in the sim they look more like the ISFD. Any ideas? (Also forgot to mention running 1920X1200 if that is of any important information.) Thanks Angelo

Hey guys using dx10 landing at default or non payware airports, the PAPI lights are way too large, also the landing light halos on certain aircraft look too large also. What are you guys using? Angelo

Dear Steve, Is it possible to correct the TWY, RWY lights of FlightBeam sceneries? I'm experiencing the square light problem on KDEN, KIAD and KSFO. They told KSFO will be upgraded, hence I thought the other ones would be flawless in DX10, just like the ones from FSDT are. I'm really disappointed! Thanks!

Steve, just wanted to personally thank you for the dx10 fixer. Bought it last year sometime in the fall. This is one of the GREATEST ADDONS for FSX. If you told me to go back to dx9, I would probably forget how.... Hope other people appreciate what you have given to the FSX community.....Ronny

INFO>>>>I use rex 4 and at one time a had FSWC installed FSWC lite on system now the water config utility in the fixer has been unavailable{not clickable} for me for the last three iterations. I set the FSWC to default but that did not help Is there a conflict perhaps with either of these programs mentioned above and DX10 fixer, any ideas would be great thanx in advance ok a little searchie search and I found my answer .... so please dont bother to answer me.

Hey guys I just followed the official "DX10 Fixer How-To" guide revision 1.05 July 2014 and after setting it all up to nvidia inspector I notice this strange weird green box in upper left hand corner similar to when fraps is running. How do I remove this? Thanks guys. Angelo

Hello Guys, now I have configurated my Scenerey Fixer perfectly except one little point :) The runway lights are generally a bit dark and they appearing very late on the final approach. They are just shining bright (like i am used to when operating on DX9) when I am very near to them. Any idea how to solve that? Best regards

Hi all, The windows of my POSKY 777 VC's is no longer transparent. The glass is colored blue and I can't see through it. I used to have this working so I believe this could be because I recently switched to DX10. I'm using DX10SceneryFixer. Could this be related to DX10SceneryFixer? Does anyone have a suggestion to fix this? Thanks in advance for your help!

Hello.. Have installed version 2.3 with the latest missing file. Under my install I checked DX10 Lights package, DX10 COmpatible Effects, DX10 Compatible Reflections. I have also been reading in the manual, but in doubt about the settings in LIGHTS/EFFECT. Im using shockwave lights. Do I have to make any changes in that box, do I have to convert/exclude anything , in doubt at what time I have to convert effects ??? Chris from Denmark

Hi guys, I tried to used the DX10 Fixer as well, and the graphics looks in general very awesome, with better FPS! But the problem is, I have flickerung and flashing from textures. The problem is only under DX10 Preview. Under DX9 everything is fine. I uploaded a video on Youtube that you can see how it looks like: I hope someone knows what can causes the issue. I installed first the shader_release_v3.2.2 package from AVSIM, with the water textures. Then I used the DX Controller 2.3 Scenery Fixer Tool and installed the libraries. What I tried already: - Uninstalled libraries in DX10 Configurator, problem still the same. - Disabled RadeonPro AA and SSAA Co…

Hello Steve Landing and taxi lights do not work with the v2.3 on the C172 default. Is it only on my machine (NVidia GTX 780 Ti, driver 337.88) ? Thank you for the answer. B)

I'm really not sure if this would be a proper place for this kind of question, but I was taxiing to takeoff from KTPA (FlyTampa + FTX + FSX/DX10) and the plane just crashed when I was passing over a bridge that was depicting a big light (perhaps one of those huge street lights from FTX?!), as the light was aside from the bridge, but so close and large that the plane might have hit its wing on it. But was it suposed to be a "hard" object? BTW, my Scenery Fixer is up to date and working properly. Anyone else has has this kind of issue? Thanks.

Hi, I'm a happy user of your excellent DX10 Fixer... but I still have an issue with three of my (legacy) airports not showing building textures....there all black. The Scenery affected is: DAVOR PULJEVIC - CROATIAN AIRPORTS and textures don't show at all neither day nor night, but they do show under DX9.... I've already set "Scenery" under Legacy tab - and unticked V2.0 Transparency Logic..... but no matter what I set, building Textures just don't show... Now - Is this a typical "write off" scenery - or can it be fixed.....??? kind regards Oberwinkler Richard

Is there any problem with. --- Nvidia cards (680 example) --- 3 monitors for main FSX ran in windowed mode --- additional monitors for undocked windows (GPS) --- Windows 7/64 bit Thank you to all , on this subject

Hello, I've run DX10 with the Fixer since it came out and it has been great. But, after installing ver2.2build45, it's not so hot. I've tried everything I know to correct the kaleidoscope scenery that dx10 is now generating without any success. http://s125.photobucket.com/user/bk2000/media/DSCN1059_zps2529857e.jpg.html?filters[user]=139419418&filters[recent]=1&sort=1&o=0 http://s125.photobucket.com/user/bk2000/media/DSCN1052_zps10f4a753.jpg.html?filters[user]=139419418&filters[recent]=1&sort=1&o=1 I've been FSX'ing for 10 yrs...? I do tweek occasionally, but, nothing lately, so, I think it's something with this Fixer version... I …

Hi i have got the shader 3 mod from bojote should i leave it installed before i install the dx10 fixer or is it better to uninstall it first? Many thanks beforehand.

Steve, quick question - I did see a known issue as per Fixer's version 2.1 build 43 - Aerosoft Oslo needs Version 2.0 Transparency in Legacy Dialog disabled, the ground lighting is solid otherwise. So I disabled the v2.0 Transparency and it indeed works now but are you planning to take a look into this problem so we could use the new v2.0 Transparency logic and also don't have the yellow square solid boxes around the airport? Thanks, can't wait for next update..

hi , I bought and installed your tool. Have the following problem, see the link below. http://s1.directupload.net/images/140602/il3q93wi.png This is Aerosoft Düsseldorf and the NGX. When I go to the Exterior and am turning around the aircraft to the airport, he invites this black film on the scene! Is it normal that DX10 takes longer to load the textures or I have something set wrong? My system: I7 3770 GTX 660 2GB Wint7 64 bit 8GB memory Could you give me the right settings for my system? CFG NI IN Game FSX. That would be very nice in the hope that I can use DX10. Thank you. regards Ben

Hi! Is there any chance to put the slider of water settings to more than 2xLOW using an AMD R9 290x without any scenery spikes etc.? I know that it is not a problem of DX10 scenery fixer, but I hope anyone of the community could solve this problem... I´m playing several games, so I need the driver version 13.9 or higher. Now I testing the version 14.6 beta but the problem still there. Playing FSX without bug is only possible when using driver version 12.8 or lower. How can I have cloud reflection on the water in spite of using DX10? Is it possible to use DX9 only for water?How? Tanks for answering!

I've just purchased the DX10 scenery fixer program and downloaded it to my desktop. This resulted in the program's ".exe" file appearing on the desktop as advertised. Upon double-clicking on the .exe file, I get the following message in a dialog box: "The procedure entry point SHGetStockIconInfo could not be located in the dynamic link library SHELL32.dll." I am dead in the water. I was attempting to open this in the system operating drive (E). FSX is in (Z) drive. Should I have sent the download to the drive where FSX is located and opened it there? System Profile: Windows XP Pro Version 2002 SP3 AMD Phenom II X4 940 processor 3.01 GHz, 3.25GB R…