The Official DX10 Scenery Fixer Support Forum

The following was asked in a thread about 2.4 installation issues Steve, did version 2.4 change the axis indicator back to black? This seemed to be a minor issue until version 2.2 or 2.3 which changed the color back to its original red color (easier to see) but after installing version 2.4, they have returned to black. Don Is the Axis Indicator Fix selected in the Other Dialog?

I'm happy because with version 2.4 i can see now shadows with Aerosoft Airbus X 318/319! This adds too much in realism! Congrats Steve! I was in a hurry to post the good news so i didn't fly with other addon airplanes. I'll check them soon and post again.

I'm at a loss and hope someone might help on this issue...I'm seeing black boxes around some (NOT all) of the street lights while running FSX and Fixer v2.4. I've got ORBX Global installed with Vector and road lights enabled. I've had Steve's DX10 Fixer since release and had no issues previously. But after a FSX reinstall, I now can't get rid of some black boxes around some of the streetlights, and I'm also getting featureless grey ramps, taxiways, and runways with some payware airports (FlyTampa and Flightbeam). I can fix that problem with a FSX.cfg tweak that addresses dawn/dusk smoothing, but the black boxes remain regardless. Given that I had NONE of this prob…

With Build2.4 and an GTX780 i have lost the VC Shadows. Any idea? Mike

First of all my apologies if this has been answered before. I have been running FSX with DX9 for many years now with no problem, however with the recent resurgence in FSX, developers seem to be making more and more texture loving sceneries, along with these loving memory and high quality aircraft I feel that the dreaded OOM is close at hand. Now I thought about going to P3D and going DX11 but certain addons are not 100% compatible add to the fact that I just bought the PMDG 777 being told that they will not support P3D and then being told that they will now but want to charge me again, so the next best thing is DX10. Now I would love to change but I have quite a f…

I like your fixer. I seem to have an issue, when I am flying around 5,000ft and above, I seem to have artifacts and other graphical issues (like textures in midair, shooting upwards) and other stuff since I used the installer (in DX10 mode). Can you help me out?

Hi there, at first thanks to Steve to continue and share with us his outstanding DX10fixer. In V2.4 I surprisingly recognized no VC shadows in HD mode and poor shadows in non-HD mode, please see pics. The shadows outside the aircraft to aircraft and aircraft to ground are shown properly. In V2.3 the VC shadows were correctly displayed in HD mode. All shadow modes in the FSX menu are ticked. Anything what I can do or miss as I do not want to go back to V2.3? Wulf

http://www.flightsimstore.com/product_info.php?products_id=2630

I am using dx10 fixer with no other shader files. The main panel in my mcdashQ400 seems to appear blue rather than grey which it is supposed to be. I have tried adjusting my brightness and contrast for my monitor but it still looks blue. Any ideas on this? Thanks Paul

I notice a significant difference in overall sharpness in textures between DX9 and DX10, the later giving LESS sharp textures. It's most noticeable in the VC when turning my my view to the center of the main panel or to the overhead. For a long time I have tried solving this by altering settings in either DX10 Fixer or in my graphicscard settings, but I see no change. It frustrates me since I do notice some performance improvement in DX10 and certain things (lights) tend to look nicer in DX10, but not having crisp and clear textures in my PMDG 737NGX VC is a showstopper for me. Especially the "engraved" letters in the panels are fuzzy and badly readable. It might be…

Hi Everyone! I have had this product for a while and I'm coming to a bit of a problem here. Maybe I'm just not understanding something right, and this fix is as simple as a tweak in the program settings. Simply put, I don't appear to have any bloom effect, and no matter what plane I am in, I don't show the Aircraft lights lighting up the surface of the ground. Once My current flight finishes. I'll switch back to DX9 and confirm that all these things are working correctly for me. In the meantime, has anyone run into this type of problem that has been resolved by tweaking settings in the DX10 configuration program? Thanks for your help and regards!

Hi Steve Just something to look at . In the DX10 Controller 2.3 Water options: the text for "Sky Reflections MAX" and "Sky Reflections MIN should be switch. In the DX10toolbox : FSX.CFG section FIBRE Time Fraction should be FIBER Time Fraction Michael

Hey Guys and Gals, I know alot of folks have been asking about the how to guide for DX10 but for some reason the old link stopped working, so here it is again! Enjoy! https://www.dropbox.com/s/f2b8esiozza5hw2/234592995-Dx10-Howto.pdf?dl=0

Get the feeling we're alone and in the dark with FSX DX 10? Shame really, came out of the gate strong then "pfffft".

Is there anyway I can get the DX10 fixer or is it removed forever? Thanks

Hi guys, for some time now I have been getting strange light effects inside the cockpit. The flood is not smooth. Instead the light presents itself as many small diamonds, together forming the splash of light. https://flic.kr/p/oGAjBB (Can't add the pic in the post) What do you guys think the problem is? Xander

I don't remember ever having this before and now I have Jaggies on aircraft shadows only. Yes, I am running DX10 and the Fixer.

Hello Pilots, can someone please write me exactly how i use dx10fixer Toolbox (2.3) can set the shadow for the PMDG 777 and NGX. Did i fear making an error. Sorry about my bad englisch Thanks from EDDM Frank

Hi! Looking for SteveFX DX10 fixer. All links point to FSS but the page says product not found?

Hi guys, I'm trying to figure out a solution for the problem as seen in the shots below. As you can see close to the horizon the haze or fog layer is cut off and somewhat tiled. I already did my best to break down the problem as much as I can and it does only occur when running in DX10 mode. The problem is especially noticeable in combination with ASN, which I run with default settings (except for cloud draw distance and visibility limits). ASN has an option called "auto adjust upper visibility" and it's activated. With this option disabled the problem seems to have vanished due to raising the visibility limit but of course the look and feel is way more unrealistic wi…

Hello guys, I still some issues with my FPS in heavy clouds. AFAIK my cfg is perfectly tweaked and NI has the good settings too. (I used DX10 How-to-doc to set everything) I use REX 4 for the clouds textures and ASN for the weather. I tried everything. New cloud theme, lowered maximum cloud layers in ASN. I sure forgot something. Has anybody got some extra hints to gain FPS with an overcast sky? Thnks! PS: I now have a GTX 560. Over 2 weeks I get a GTX 680. Hope that helps too! EDIT: In DX9 mode my fps were always fine with an overcast sky!

Hi guys, Over the next following days I am fine tuning my system regarding AA settings. As I have a triple monitor setup in 5920x1080 resolution ehre every small change in detail immediately has an impact on performance. Currently I am testing at my heaviest framerate reducing environment : coming in from over sea and flying over NL2000 + AS Mega Airport Schiphol + 5 thick cloudlayers + 20% MT aircraft. With SGSS at 2x , 4x or 8X my two Titans are at 99% most of the time using one wide view over 3 monitors. When using just 3 monitor the load is around 60%. To see what is possible I was thinking about trying with Multi Sampling without SGSS. Perhaps I…

Hi, I'm messing around with the excellent 747-400 from glorious Posky. Seems to work great in DX10 (I've downloaded the package from rikooo.com). I'm using the excellent Fixer (glorious? Hope not yet!), but I can't seem to get rid of an exterior shadow glitch on the entire fuselage as I look at the plane (FSX is a bit about voyeurism, isn't it?) from different angles. The entire aircraft is covered with shadows that occasionally flicker and don't relate in any way with sunlight direction. Only way to fix this so far seems to disable HD VC shadows from within the Fixer. Does anybody have insight on this, or has anyone noticed the same problem on the Posky 747's. …

Hello the scenery fixer is a great software..,i switched dx10,there is much improve like bloom of lights,like internal shadow and..thanks to Steve....many thanks is discover much new thing because of that... but there happen some stutters after switching,i had not any stutter with dx9 before,is there any way for getting smoother frame like dx9?iis this happen normal when switching dx10? used frame limiter internal and external ,,my pc is over clocked 4.9Ghz,16G Ram ATI5970HD,SSD and..i am not beginner with fsx,worked with fsx since 7 years,known already well all of tweak stuff thing, know bojot and kosto and etc ..,i made many many videos by today,,here the link of …

No idea how I tripped this one, but today I fired up FSX and notices that the lights outside were like balls. Figured it was a bloom setting, so loaded up the fixer. Now I see everything disabled, but the status says Libraries are installed and up to date. I try to switch from DX10 to DX9, and I get a popup stating that my license is invalid. The one thing I have done today was to install the rest of my add-ons. I installed RealAir Duke, the RealAir Legacy, and the C340 and Mooney Carenado. I didn't do anything else, outside of moving my DX10 icon to a subfolder off my desktop. Any idea how I invalidated my license? One more thing I did a couple of days ago was …