The Official DX10 Scenery Fixer Support Forum

Hello, I have problem now with disappearing runway and airports lights even after I went back to DX9 I uninstall DX10 like instructed in manual, but its still disappearing in DX9, before the DX10 fixer there was nothing like that. I have deselected DX10 in FSX I have recreated new FSX.cfg I have deleted both shaders folders, fsx recreated new. Nothing helps Maybe you could help me please? Thanks. order number FSS0323316

Shadows in the chipmunk with 2.5 that is really top-notch, I absolutely love it it, works like a dream thank You Steve

I think I've lost the wet ground effect when raining after installing the Fixer. Is there a switch I missed? Thanks, Heron

Hi, One of the 347 reasons :lol:I installed the Fixer was the announced solution for the FSX milky seas, the exaggerated moon effect imposed by Microsoft, extended to lakes, rivers, ponds and any water mirror. Now I discovered that the milky seas effect does not work for FSX Water settings lower than 2x. Flying any object than PMDG T7, I use Max 2x, the best water setting. But the T7 is memory hunger and I put everything possible down when using her, including water settings. Is there any other setting in Fixer to remedy milky seas using 1x water settings? Greetings, Heron

Hi, This week we had a new Nvidia driver announcement. Do we simply install the new driver or do we have to press the APPLY button on the Fixer interface? I ask this because we know we have to reapply the Nvidia Inspector settings after driver upgrades. Regards, Heron

Hello I am about to take the plunge with the DX10 fixer but before I do can anyone tell me if it will let me install on both my PCs or will it work on just one installation? Darran

Hi, This is an old issue I have been living with: at high flight levels, small water mirrors showing the same textures as we see at oceans. How can we fix that? To make things more real, I have turned my FSX water settings to Low1x, with acceptable results in the Fixer, Steve Profile. Regards

Hello Steve, You helped me on this same aircraft earlier this year so I know it's not the aircraft. Eaglesoft Hawker 400XP. I retrofitted the VC panel with ISG1 EADI and the Proline 4 MFD. I can't quite pin down whether it is anything with DX10, ISG1, or just plain FSX. Parts of the guage, (speed tape and heading tape) do not show up at night in the VC. They work great at night in the 2d cockpit and work fine in the day in the VC. I downloaded 2.4 and re-read and troubleshot with the manual. Areas that I thought would pertain. Legacy shading, V2.0 Transparency etc. Nothing worked. I switched out the A320 EADI, and replaced that as well with ISG1 …

Issue: I'm having the strangest issue since trying to switch over to DX10. Whenever I'm in NYC (KLGA, KJFK, etc) I get intermittent stutters which essentially pause the simulator for about 1-2 seconds. It repeats on a pattern of 5 seconds stable, 1-2 seconds pause, back to 5 seconds of stability. This eventually goes away if I'm far enough out from an airport such as directly over the city. Once I get close enough to a NYC (mainly KJFK and KLGA) the stutters return. What I've tried: 1) Every possible time of day 2) Every type of aircraft 3) Default and custom scenery 4) Inspector settings and FSX settings. What worked: The only solution I could find w…

Made s flight around PAKT-Ketchikan, Alaska, ORBX airport/region, at dusk, ceilings at 1500 overcast. I used Steve profile + FSX water at High 2. My weather is ASN, with REX Textures random theme. Although The sea was kind of corrugated, it was OK, but, sometime after takeoff, over the sea at 1000ft, some big blocks as grey rectangles started appearing on the sea. And also, seeing from my left seat, the strobe light on the right wing was squared. I use Ezca. Changing to the right seat, the grey blocks were gone and the right strobe normal. Regards, Heron

Their used to be a link up on the pinned topics on how to update to a newer version, currently I am running ver 2.3, would like to go to the new version 2.4 over at flightsim store. If I remember at best, 1- you first download the new version 2- then uninstall libraries from older version 3- then go to control panel, and then uninstall older version, which in my case would be 2.3. I would appreciate if someone could help me out with the rest of the info, to do it in the right order. thanks, Ronny

I've been getting this rather unsightly whole-screen gray-out with bloom enabled. I'm using a modded suneffect.cfg as well as having "ShowLensFlare=TRUE" enabled in my cameras.cfg. It works great when bloom is disabled, with the flare from the sun adding to the cockpit embiance. However, with bloom effects enabled, the whole screen turns gray when the view is directed towards the sun. If I can figure out how to upload a screen shot, I'll demonstrate. Any tips? EDIT: this gray-out effect is present with and without sun glare effects, Showlensflare=FALSE, etc. It happens always however, when the bloom effects are enabled.

Dear all This is my first post on Avsim after years of lurking, so I'd like to start by offering my sincere thanks to SteveFx for bringing FSX back to life (at least for me). The reason I've emerged from anonymity is because I've encountered a problem for which I can't find a solution. With the fixer libraries installed, some of my aircraft (stock, e.g., Beechcraft Baron and add-on, e.g., Carenado Mentor) exhibit disappearing landing lights approximately 1000 ft after take-off. The landing lights are present before take-off (I'm referring to the effect on the aircraft not illumination of the ground), disappear during flight and re-appear when approaching the ground. U…

I am a happy customer of Steve's DX10 Scenery Fixer. I have just recently purchased the PMDP 737NGX series of aircraft, and I have come to notice what I think to be an anomaly with the cockpit VC dash. I've never experienced this aircraft outside my own system, so I don't know if what I am seeing is normal or not, but it looks a bit out of place. Not knowing much about graphics, I certainly can't begin to even explain it, let alone diagnose it, but I wonder if it is DX10 related ... shadowing perhaps? Here is a picture, with the solid bland gray shapes being outlined. I assume these might be shadows?

I went into DX10 Scenery Fixer (2.4 build 63) today to do some adjustments and discovered all my option buttons, except Lights/Effects and debug, were greyed out and not accessible. What did I do?

Does anyone have jagged textures particularly in the VC. I just updated to version 2.3 from an older version and its seem the overall quality and sharpness has depleted compared to the older version. No matter what i do in my settings or inspector it doesn't seem to make a difference. It is really bugging me and defiantly noticeable when comparing. Is there something im missing here? Any help is very appreciated as i take great pride in my flight sim. I do all my testing in majestics q400. Ill see if i can post some pictures. Cheers

Hi, I had bought Steve's DX10 scenery fixer a year ago. Should I download the latest version or am I good with the version I have. Basically want to understand if there are major improvements. I have not seen a list of issues that have been addressed in the current version. Thanks Hari

I have Steve fixer 2.2 version as yet I have not upgraded to 2.4. I have orbx England scenery and just downloaded the latest patch so I can use ftx global lights with the England scenery, will the global lights work ok with Steve fixer 2.2 or do I have to get the latest version I have not had any problems running version2.2 and am really happy with the way fsx runs in dx10 but I would like to try out ftx global lights in dx10 mode.

Hello , I have Installed today Build 2.4 and added to the top of the scenery library "LightField" folder which includes LightField bgls for some legacy Aerosoft airports but still , Papi lights and some other lights disappearing and flashing... What can I do ? isn't the Light Field solution supposed to work much better since build 2.1 ?

I have issues with traffic. Gpu is ASUS GTX 780 DC2OC with 344.11 Driver. Can anybody help me?

Hello , I have Installed today Build 2.4 and added to the top of the scenery library "LightField" folder which includes LightField bgls for some legacy Aerosoft airports but still , Papi lights and some other lights disappearing and flashing... What can I do ? isn't the Light Field solution supposed to work much better since build 2.1 ?

Hi Guys, I have tried many different things in the DX10 Fixer but nothing solves this in FSX, in the PMDG NGX, Aerosoft A318/19 etc when gsx or tool tips appears the displays dim then when message has gone go back to former state any ideas ? Peter

Hi all, It seems that the DX10 Fixer did not completely solve the problem of invisible AI traffic models in my case. Or if this was never the intention of the tool, I apologize, but maybe you have a solution for my problem: In order to increase performance, I replaced the UT2 general aviation traffic which solely uses FSX standard GA planes (Maule, Cessna, Cup, Learjet etc.) with the AI models found in the FTX NA general aviation freeware package. Those models should work in FSX, they have the correct .dds texture format but still some of the planes are invisible when using DX10 plus "aircraft cast shadows on the ground" option. I did a quick and dirty conversion …

Hello Steve, in v2.4 and previous versions I recognized this blend through effect on ORBX airport fences during low visibilty, please see the represantive pics on the Arcata KACV airfield within the ORBX NCA fullterrain scenery. What can I do and would appreciate Your advise. Wulf

Hi guys, I bought the fixer when it recently came on the market again, and having a few issues with full screen vsync. I get a horizontal ripple frequently and compared to DX9 it just doesn't seem to be working in DX10. I'm going to trial again going to +DX9 to make sure it's definetely not there but in the mean time, is there a way to fix this? Nvidia inspector settings: 1/2 refresh rate Internal FPS (through sim) = 30 Regards, Alex