FS2CREW: PMDG 777

Hi. My P3D V3 Crash to Desktop about 1-2 hour after departure. Also my Fs.com (module to my Mcp from CPFlight) stopped responding before CTD. Sometimes the P3D just shot down with no CTD error. Now i fly without Fs2Crew 1.7. And everything work perfect? I also have The reboot to the Ngx. Here works everything perfect! I run it at Windows10 64bit, and it is all up to date.

Hi Bryan, I have 3 screens running P3Dv3 PMDG777-300ER under Windows 10. I am unable to move the FS2Crew Main Panel onto a screen other than the PMDG screen. It would be great to be able to do so in order to keep the sim screen 'clean'. Would it be possible to provide such function in a future release? Kind regards, Richard

I am running FSX/SE exclusively, nothing else on my machine. I recently updated my 777 FS2Crew, which was running nicely as it was. First messages I started getting when I booted FSX was a warning that my RAAS was out of date and did I want to update it. Now, I never purchased a stand-alone RAAS software, and it came as part of the 777 FS2Crew. When I said yes, it crashed. Next time, and subsequently several times after, I said no and FSX loaded as usual. NOw I ma getting a warning that says there is a problem with RAAS, and if I continue to load it, there will be problems - do I want to try and load it, or skip it. So I skip it and all runs okay. I'd like to get rid …

Hi Bryan, This is what I have with the defaut FS2Crew setting. This is what I would like. My screen resolution is 1920 x 1080 How should I edit the panel.cfg please. [Window21] size_mm=1526, 56 pixel_size=1526, 56 position=3 visible=0 ident=1000 zorder=100 Sizeable=0 gauge00=FS2Crew2010\Versions\PMDG777\Gauges\FS2Crew777!FS2Crew_MainPanel, 0,0,1526,56 gauge01=FS2Crew2010\Versions\PMDG777\Gauges\FS2Crew777!FS2Crew_Audio, 20,20,5,5 gauge02=FS2Crew2010\Versions\PMDG777\Gauges\FS2Crew777!FS2Crew_VoiceMain, 10,10,5,5 [Window22] size_mm=367, 187 pixel_size=367, 187 position=3 visible=0 ident=1011 zorder=105 Sizeable=0 gauge00=FS2Crew2010\Versions\PM…

Can someone help me how to adjust the crew voice for the T7 voice commander? I´m pretty sure that I did it already before but don´t know how I switched through the CFG option but nothing was found. Thank you!!

Hello; I just installed the latest version of the button control for the PMDG 777,1.7.Im having a problem,when I select the ATC window,it does not open,I checked the PMDG 737,I also have the button control version installed,and it works,I have Prepar 3D V3 installed,the latest one.Using Windows 7. Thank you; Mark Wyckoff

Hi everyone, From the changlog i read that there are two fixes only and both about P3D. If i run FS2crew on FSX-Se can i avoid to install it or it is a main installer for both version anyway? Thanks

Hi There, Thanks for getting the new installer up. I'm sure I did something wrong, but I ran it and it appeared to install properly. I can run and enable from the desktop icon but when I hit the autofeather key in the ngx nothing happens. The FS2Crew bar doesn't pop up. Should I do some checklist of troubleshooting? Thanks btw- I LOVE this program and have it for the Aerosoft Airbus and PMDG 777 as well.

Hi, Just installed the new 1.7 The firs time I ran it within P3Dv3 all seemed fine, closed the main window, crash No every time I try to open FS2Crew, it crashers P3Dv3 Clean install of 777 and I waited for this new version of 777 (1.7) Any ideas? Installed as admin etc, never had problems within fsx or P3d v2.5

Hi. I have been trying to change the landing lights option in cfg from 10k to 18k but it still remains 10k when I change it. All other changes work but this one. V1.7 Thx

Brian, I presume that simmarket now has 1.7 that supports P3D v3.0. Is that correct?

Hi Bryan, not sure if this one is caused by FS2Crew. After some time flying 1h or 2h P3D stops working and crashes. Each time I got the same error messages as you can see on the pics. This kind of P3D crash stared after FS2Crew was installed. Any idea? Thanks for your great work!!

Hi Bryan, I know that there was an .ini file somewhere which could be used to adjust the size of the main panel. Which file and variable is this? Cheers, Richard

11 days have not been flying, because the installation of P3DV3，But V3 is not supported by FS2Crew，Can't wait to fly，In simmark to buy, i can get 1.7 of the download process? I don't want to wait。Cry%>_<%

Attention VPilot P3D V3 Users. Some people reported that when using VPilot (the on-line ATC pilot client) P3D V3 would crash the second you loaded the 777 with FS2Crew. The solution seems to associated with the load order. The load order must be: 1. Load VPilot First. 2. Load P3D V3. 3. Lastly, load the 777.

After installing the latest update I am getting an instant CTD when initializing the Fs2Crew panel. Repeated error after three attempts

I am getting a very consistent crash to desktop during the before start procedure. I am using the US voice set running ASN and GSX. It has happened at FSDT JFK v2 and UK2000 Heatrow Xtreme v3 so far but I haven't tried at any other airports. The crash happens every time just before the FO says "ready for the before start checklist". The sequence is first the sim hangs up, the window that says Prepar3D has stopped working comes up, the FO says "ready for the before start checklist" then it crashes. If I skip over that step everything continues to work fine until the runway entry procedure but there is another thread on that.

Hi Bryan, as I have written in the release thread for the new version 1.6 of FS2Crew for the PMDG 777, I still get app hangs/crashes when I call for the runway entry procedure. I have reinstalled both the PMDG 777 as well as the new version of FS2Crew into P3D v3, but this doesn't help. Here is what happens: As I call the runway entry procedure (same happens by the way when calling the "ok to clean up" after landing), I hear the FO starting his flow by flicking some switches and then all of a sudden, P3D freezes. When I go to the task manager, Windows says that P3D has stopped communicating and when I click on the details it says "App hang" (if required, then I can gi…

I have got fs2crew working with no problems voice and button version.had to make changes to the config file. As Bryan said when he gets the new version out you will have to revert back to the old config file so save a back up. Please note the drive letter d is for my system you will need to use what ever drive letter that you have it installed in. Regards Ted Kiser ps this is just and example as the windows numbers my be different [Window21] size_mm=1526, 56 pixel_size=1526, 56 position=3 visible=0 ident=1000 zorder=100 Sizeable=0 gauge00=D:\Prepar3D v3\FS2Crew2010\Versions\PMDG777\Gauges\FS2Crew777!FS2Crew_MainPanel, 0,0,1526,56 gauge01=D:\Prepar3D v3\FS2…

Just giving you a heads up that V1.6 will be released shortly, probably in a week. Some of the French users didn't like the French voice set, so we re-did large chunks of it. The French Capt is now a female, and the flight crew uses International French. I think some Quebec French slipped in the last French voice set.

I am some times getting poor speech recognition. The take off and climb out is now ok. I even managed the descent checklist moving down the line with "set and checked", if my replies have not been recognized. Now the approach phase is difficult. Is it just training training training, or does somebody have any additional hints? Thanks Perry

Hey pilots! Hard to explain because I dont know whats missing.. But at the before start checklist my FO states "cdu not complete". The strange thing was that the checklist than gets stuck and the ecl stays open in popup. No restart of cl possible nor "set and checked" helped. One thing that was not entered was the STAR for arrival... will the FO have it in preflight? Maybe it was a onetimer, but I thought I ask for experiences. Thanks!

I have a problem with my FS2CREW 777. According to the manual, when Approach Brief was completed, FO should run his Descend Flow. But sometime my FO does not do that. Anyone know what is the problem? It works when I test on the ground. Unfortunately, when I was flying a flight,It will not work！ Thanks

Hi I am trying to figure out couple of things from FO flow in voice control. From manual: PREFLIGHT CHECKLIST FO reads these 2 items: Oxygen Flight instruments But does not read these two: Parking brake Fuel control switches If these two items is read by CA does FO have to read these items or not? Same thing here: BEFORE START CHECKLIST FO does not read: Passenger Signs Beacon TRANSITION LEVEL ALTIMETERS RESET XXXX - FO always repeats 1013 SET, even if I use QNH 1025 or QFE 998mb. SHUTDOWN CHECKLIST FO only says Parking brake from the …