FS2CREW: PMDG 777

FS2Crew 777 Help, Troubleshooting, FAQs: Please see the FS2Crew Trouble Shooting section at this link: http://www.support.fs2crew.com/help/manuals/#pageid=troubleshooting5 Summary of most common problems: Problem: During the install, I received an error message related to the Options Ini file. Solution: You have a write permission issue or you never ran the 777 at least once before installing FS2Crew. The PMDG 777 Options.ini file is missing. Run FSX/P3D with Admin rights. Right click on the FSX/P3D.exe file in your main FSX/P3D folder and select "Always run as an administrator" in the Compatibility tab. Then run th…

Attention PMDG 777 Drivers, FS2Crew for the PMDG 777 (P3D V4 64 Bit Edition) has been released! Please visit www.fs2crew.com to download it. Notes: 1. Like with the FSX version, there are two versions: A Captain's Set and a regular version. The only difference between the two is the Captain's Set includes an unlocked version of RAAS for P3D V4. Other than that, they are identical. 2. As a FREE bonus, the 777 Global Voice Set (a 20 Euro value) comes with both versions! It's built right into the product. There's no separate installer. 3. An additional 5 euro coupon code is also available. Coupon Code: 77764

Attention FS2Crew 777 Drivers: The Version 3.6 update has been released for the P3D V4/5 version! This is a FREE update. All FS2Crew 777 users should install it. THE LATEST VERSION IS BUILT INTO THE MAIN INSTALLER ONLY. YOU WILL NEED TO LOGIN TO YOUR FS2CREW ACCOUNT AND RE-DOWNLOAD THE MAIN INSTALLER AGAIN. LOGIN TO YOUR FS2CREW ACCOUNT AND CLICK "COMPLETED ORDERS". IF YOU PURCHASED VIA A 3RD PARTY VENDOR LIKE SIMMARKET, ETC., PLEASE REDOWNLOAD THE MAIN INSTALLER VIA THEM DIRECTLY. PLEASE GIVE THEM A FEW DAYS TO UPDATE THE FILE ON THEIR SYSTEM. YOU DO NOT NEED TO UNINSTALL FS2CREW 777 FIRST. IF YOU REQUIRE AS…

777 Captains, It's time for a crew change! FS2Crew 777 has been around for a couple years now, and it's time to add some fresh talent to the cockpit! 7 new FO's from all over the world have just boarded the aircraft! Click here for more information. 5 Euro Coupon Code: 777FO Note: You must have FS2Crew 777 Version 2.0 installed. V2.0 was released on 24 June 2016. The version number will flash when you open the Main Panel.

I would like to download FS2Crew for the 777 via the Legacy site, but unfortunately the download has expired. Could you kindly reset it for me without me having to buy the complete Access Pack for 100 euros? I already have most of it. Thanks in advance!

Hi, I can deactivate the ADF receivers in the aircraft-specific options but that doesn't make them disappear on the exterior model (the two little humps on top of the fuselage roughly in the middle). They should be removed if no ADF is equipped. You can check on many photos that they are not there, like here: https://www.planespotters.net/photo/1493777/a6-eqe-emirates-boeing-777-31her Regards, Niklas Lieb

Hello, I want to inquire about an effect that has long been existing in FS2Crew for the 777, at least for the last two years and already in P3Dv4: When you use ECL, once you call for the preflight checklist and it is opened by FS2Crew in the popup, it is not possible to change the left screen (normally ND for the Pilot) anymore. So e.g. it is not possible to show the Flight controls page in the left screen for the check before taxi. Of course it's not the end of the world but I wanted to ask if this is a know issue? I guess it is connected to FS2Crew calling the popup and filling out the ECL. Best regards Adrian

When using the FS2Crew in the PMDG 777, the first officer is a female. But I do not want the female voice. I want the fist officer to be a male. I know about the Config in the FS2Crew menu but that does not change the person's voice from female to male. It only changes the accent of the voice. How do I change the first officer's voice from Female to male in FS2Crew? Ken.

Hello, I plan to purchase PMDG 777 FS2CREW for P3Dv5. but how many crew accents exist in FS2CREW for PMDG 777?

In the FS2Crew Manual for the PMDG 777 it notes the voice command to change the COMM 1 or 2 frequency as follows: "SET XXX (POINT/ DECIMAL) ON (STANDBY) COMM ( 1 / 2)" This voice command does not work for me at all. I tried guessing at alternatives and found that "SET XXX (POINT) on Frequency 1" did something but only on the FO side and inconsistently at that. Could somebody please explain, if you know, what the proper voice command sequence(s) is/are to fully control the radios by voice. Thanks!

Hi I have ultrawide Samsung Odyssey G9 monitor. Default resolution : 5120 x 1440 Using latest Prepar3d5.2 All FS2Crew panels are oversizred.. Fonts blurry. Maybe that resolution is something what FS2Crew cant handle correctly ?? bstrgrds, Wepsik

When I enable FS2Crew PMDG777, it crashes Prepar3d exe on startup. P3D works OK when FS2CREW is disabled. I reinstalled FS2CREW without success. Any suggestions, how to fix this problem? Thank you,

Hi all, Is there anyway to stop the chocks being automatically released following before start procedure/checklist? Problem I have very rarely is if I need to use a huffer to start her up because APU is inop it gets bit messy. Its all connected up but then auto removes chocks meaning I have to go through the whole disconnect/depart/put chock on/arrive/connect etc. Any ideas? Many thanks in advance 🙂 Chris

Not 100% sure about this, but I think when the FO is configured to connect the GPU as part of the preliminary flight procedure, it connects the air start unit instead. I don't touch anything, just let the preflight events run, and I am left with an aircraft with no GPU but with the air start unit connected, otherwise correctly configured.

I have the new PMDG 777 updated version and the only issue I have is that the FO will callout spoilers not deployed even though I have armed the spoilers. Is there a fix to this?

After enabling FS2Crew for PMDG 777 it seems to have done something to the cockpit chimes, dings, and button clicks. I have the ER, LR, and 300ER. Wondering if any of you guys might have an idea of what caused this. FS2Crew audio works fine as does engine sounds. Also not have the same issue with the 737 or QW 787. Speakers also seem to be cofigured correctly to send all audio to headset. Thanks!

Hi, In setting up my approach I'm using the 777 EFB to calculate v speeds +5 knots. During the descent flow, however, it looks like FS2Crew resets those v speeds. Is there a setting to stop this? Thanks, Daniel

Hi. Downloaded and installed 3.5 for the pmdg 777 and the interface window is now huge. I made sure to disable then re enable in the configuration manager but the problem still persists. Also can i suggest you give users the ability to click and drag to resize the windows? Thanks.

It seems that FS2Crew changes the view during the descent flow on the CDU in the MENU view. The 2nd line on the left side of the CDU "DSP CTL" OFF/ON disappears and on the Upper CTR DU the display DISPLAY SELECT PNL appears in yellow letters. The first picture shows the state before, the second the state after. After that, the display of the different DUs can no longer be changed via the display panel and I have not yet found a way to undo this change during the flight. Cheers Stefan Liebe P3D v5.1.12.26829 PMDG B777 1.11.1143 Picture 1 https://imgur.com/kDt3vXG picture 2 https://imgur.com/f1UEA9s

Hello, When I change the view to external and come back to virtual cabin, the panel of FS2Crew flicking a lot. Is imposible to mantaining on the view becouse is very uncomfortable. Continue flicking until close P3Dv5. Please, anybody help me? Thanks and regards

I have voice control activated when opening FS2Crew control panel with the PMDG 777. For some reasons, my microphone and my headset do not work anymore with P3D. When I try to switch from Voice to Button control by clicking the first button labelled Voice, P3D is stucked and I need to kill the process. Is there a way to switch from VOICE to BUTTON without crashing P3D or reinstalling FS2Crew? Stephane

I have recently updated the following : p3d v4.5 to the latest version PMDG 777 to the latest version FS2 Crew for 777 to latest version 3.5 after the the updates fs2 crew panel is not opening . The keys to open the panel are assigned correctly. I tried uninstalling and reinstalling fs2 crew but not luck. Help please! Thank you. umair.

Hello, I am installed FS2Crew 777 v3.3 but the window is ver little. Is very difficult to read. Is possible to change for a bigger size? I not have this problem with FS2Crew for PMDG 738 NGXu. Thanks and regards.gards.

Hi guys, I would like to know if its possible a new option for landing. I am currently flying the 767 in real life and, in most of our approach we select flaps 15 or 20 before landing gear extension, as FCTM recommends: “Flap Configurations for Approach and Landing During maneuvering for an approach, when the situation dictates an earlier than normal speed reduction, the use of flaps 15 or flaps 20 with the gear up is acceptable.” is there any chance to creat an option to use this configuration? I use the button version, and every time I need to go to the fs2crew menu, select flaps 20, command flaps 20 and, go back to select gear down, it would be amaz…

First of all I would like to thank the developers for the quick update to version P3d V5. I have some wishes that would improve the software from my point of view: 1. Please, please turn off the coughing and throat clearing of the co-pilot, it's just annoying and has absolutely no use. This is my most urgent wish. 2. I have a monitor with a resolution of 3840x2160. At this resolution the FS2Crew main panel and also the other panels are too small. I have solved this for me now so that I have enlarged all panels by a factor of 1.5.For example gauge00=FS2Crew777!FS2Crew_MainPanel, 0,0,2289,84. With this modification the panels are in a size that I can use. With the…