FS2CREW: PMDG 777

i been try to install the voice fs2crew but it want find my pmdg 777 and my pmdg 737 have no problems insatlling can you tell how i can install th 777 voice thankks

Sorry been out of the loop for a bit. I had the fsx version. Of 777 voice control. Is the P3dv4 version a repurchase or a free upgrade for previous owners.

Hi all, after push back and engine start I ask the FO to set flaps. After this "Before Taxi Flow" is running and then we do the "Before Taxi Checklist" When I remember rigth in the previous version the FO was setting the autobrake to RTO. Now he says "Autobrake RTO" but does not set the autobrake to RTO. Does any body knows what to do? Thanks a lot Stefan Liebe

Do I have to do something in settings, before Runway advisory system can be used? Because it is not working for me right now

Dear Bryan, Hope you are doing great, i have been enjoying your product since the beginning, i had once concern, my case is when i use Fs2crew and if my flight is on one go without any CTD error, FS2crew procedure will go flawlessly, but when there is CTD or need to load again from middle of flight and come to approach the Before landing procedure is not done automatically, i mean when 10k below landing lights procedure are not done automatically do you know how to overcome with this issue. Waiting for your speedy reply Best Regards Bikash

Hi guys, X64 version... The sound disappears after you use the PMDG pushback option.... Everything else is working... If you don't use the PMDG pushback then no issues with sound.... Andrew

No luck through meesenger on facebook to fix this problem so thought I would throw it on here to see if anyone else is having same issue, FS2Crew 777 in the PMDG 777-300 isn't shutting off the centre fuel pumps. Minor issue maybe but still needs to be fixed. I have flown nearly 6 flights now and looked at every setting possible and its still not doing it. Any ideas and has anyone experienced the same please?

Hi I bought 777 fs2crew and its works and today Its isn't work, I click on C ,set set on the autofader and when I click on C the panel appears and immediately Disappears. I try to reinstall and its still dont work, What supposed I do?

I purchased the PMDG 777 Captain's Set (P3D 64 Bit) with Order #69076 but I can't find how to change FO voice set, in the Configuration manager there's no option.

Hey everyone, With PMDG putting out updates almost every week that require the uninstallion/reinstallation of their 777, do we have (or is it recommended) to do the same with FS2Crew & RAAS?

I've only started using FS2Crew recently, and am still in the learning process. Using the tutorial, and FCOM is proving to be an excellent way to success. However, I am having one issue that is beginning to drive me nuts. I've searched the forum, and FAQ, and can't really find it addressed. So, please bear with me. My FS2C is configured to use 777's ECL. I understand, to a degree, that due to SDK limitations, FS2C interacts with it using virtual mouse-clicks, and not direct control via the SDK. While I've read that, I definitely have not internalized what that means in terms of "you should / should not do X". Specifically... On several flights so far, my FO has …

Hi, I tried multiple key assignments for the secondary button - 'O','X','N' http://www.support.fs2crew.com/help/manuals/default.aspx#pageid=secondary_button2 Confirmed I used the PROPELLER SYNC(ON/OFF) to assign They are not working. Any suggestions as to what I might be doing wrong.

Dear Bryan, I have followed your products since beginning and enjoyed the most, but i noticed that many announcement voice are missing ins 777 for V4 . which are Pre Departure Safety Announcement by cabin crew After Takeoff Announcing Lunch Services and Crz message, Before Arriving the destination announcement, After landing Announcement are all missing, these voice sets make flight simulation like realism environment, is there any chance bringing those announcement voice set back and i am missing something. Best Regards

Hello! I see such a problem. During approach in vmc conditions FO says "One thousand not stabilized" in previous versions, fs2crew detected meteo conditions and used to judge about approach stability at 500. Using AS for p3d v4 last beta build.

Just wondering if this is going to be a free upgrade for P3D V4 or there will be a charge for it. I notice with RAAS that we will have to buy the new version. Most developers are upgrading their products free but if we have to pay then that is fine as I can understand that there is a lot of work involved in this.

I installed the P3D B777 and FS2Crew 777 but the main panel will not open. I confirmed the correct entries are in panel.cfg and Config Manager says FS2Crew is enabled. I set one of my throttle buttons to Autofeather Select but nothing happens when I click it. This is the same button I use for other FS2Crew aircraft (PMDG 737, AeroSoft 320, MJQ 400) and they all open the main menu. Any help is appreciated. Richard

Hi, just downloaded FS2Crew for v4, I can open the panel. But as soon as I click something I get a CTD. Error messages in Eventviewer: Display driver nvlddmkm stopped responding and has successfully recovered. Application: Prepar3D.exe Framework Version: v4.0.30319 Description: The process was terminated due to an unhandled exception. Exception Info: exception code c0020001, exception address 00007FFAEA619E08 Stack: Faulting application name: Prepar3D.exe, version: 4.0.28.21686, time stamp: 0x594a7255 Faulting module name: KERNELBASE.dll, version: 10.0.15063.296, time stamp: 0xa0527b0c Exception code: 0xc0020001 Fau…

It would seem that the Crew has arrived and we will begin boarding shortly. Saw this on their site this morning :) Kevin

Hi Brian, I believe I have spotted a small problem with the T7 Freighter and v3.1 of FS2Crew. For Voice Control, I can set the MCP correctly to FPA mode, but once in this mode and having changed and reached a new altitude, I am unable to command V/S mode. When I state "Select Vertical Speed please", the MCP remains in FPA mode although the verbal readback from FS2Crew is correct. V/S mode appears to be working correctly in all other altitude modes I use and can command V/S increase or decrease, so the V/S voice commands are recognized. It just appears that once in FPA mode, it does not want to revert to V/S mode when I use that speci…

before installling fs2crew for pmdg 777 my ts2 was working fine while i was doing a route on ivao after installing FS2CREW teamspeak 2 can recive voice but cannot transmit it the green circle is appearing when i press PTT key but no one can hear me i have this problem at last week and the only solution for it is to format whole computer i dont need to format it again just i want to get rid of this product .. bring my teamspeak 2 backkkk helpp

Hi there I have FS2Crew for PMDG 777 after FL 10.000 F.O turn of logo light so how can i fix it? Also one more thing, how can i disable fs2crew from turning off the autopilot before landing? Please! I need your help Mansour Asenaidy Sony VAIO I7 CPU Q740 @ 1.73GHz Prepare3D v3.4 PMDG 777 & 747 Some Airport scenery OERK, OEDF, OEJN, OMAA, and OMDB.

Installed FS2CREW. Enabled FS2crew in the config Manager. Ran P3d version 3.4.18.19475. Default load screen loads. Select PMDG 777 house. Airport gate at KPHL. Select OK and P3d CTD with no error message. Disable FS2creaw in config Manager. Same setup and everything loads fine. What am I missing? Thanks Bill McCracken Windows 10 64 i7 CPU with 12 gb internal memory Nvidia GTX 1070

Hi, there's something really strange which has been going on for some time now. I set up FS2CREW in such a way to have the first officer run his flows. Nothing is happening. Audio test is not working, if I raise up or down both captain's and/or FO's voice volume, after a while the audio stops working. I unistalled it several times by deleting everything (registry keys, folders and so on in order not to have any left traces of the program), but nothing, this issue still persists and is orribly annoying. FS2CREW for NGX is working fine, so it's not a problem of my videocard, as it was once suggested when the first issues appeared, but there must be something else behind. A …

Afternoon Bryan. I was considering updating my flight sim over to P3D. I have basically everything you've ever published and I was just wondering if 1) the current T7 FS2Crew is P3D 3.4 compatible, and 2) if I can run the FSX and the P3D versions side-by-side. Thanx for the info! -Rick

My dedicated SSD Prepar3D installation failed and I have had to reinstall P3D and all my addons to a new drive. I'm getting this SDK error message(image below) when I run FS2Crew in the pmdg777 ( button mode), other SDK errors in these forums don't seem to be the same. I have never had this error under my old installation.in Any help appreciated. Steve S