FS2CREW: PMDG 777

Hey there! On the new update, the built in checklist to the CTR Panel is not showing up while going through the flows. Not sure if this is just a setting I missed or if it's a bug with the new update. Thank you! Noah Harget

Do you all have any intentions of releasing an FS2Crew product compatible with PMDG's updated 777 product? If so, will it be released for P3Dv4 as well?

Hi, where can I open a ticket? Thanks Attila

Hello, I ask why when I go to press the command to give the procedures a message appears that I have to visit the forum

Sometimes when a checklist hangs or the FO just does not understand something it can be quite nasty to get the ECL closed. Would it be possible to add a button to the mainpanel that closes the 2D ECL, regardless of the checklist situation?

For the record I have both FS2Crew for the PMDG 737 NGX (not the newest one, NGXu as I still only have FSX acceleration) and FS2Crew for the PMDG 777X I have been flying with the 737 over the last few days and have had no problems with the audio. Since installing that version (737 crew), I have not used this version (777) The moment I set up a new flight using the 777, the audio for this program does not work. I have tried resetting it (twice) but lacks audio feedback. The Voice Commands still work per the log, but there is no audio to confirm the FO has received the request. However, If i used a previously operated saved file (I always save my flights when …

Hi. i wonderd if i can have the fo use and mark the ECL as normal on the lower ECAM but without popping out the window? thank you very much

Hi Bryan Normally I always use the PF events, so never came across this until this week I was short on time and skipped the PF events. How do I get the FO to do his Pre-Flight Flow? Dani

I have just installed the FS2Crew for PMDG777 v3.2 recently. And I got a problem: when I call FO or push the button to do preflight checklist, the electronic checklist screen popped up as normal but the items appeared less than 1 second and then nothing on the pop-up screen. FO just read the item and do the check. After finishing preflight checklist, the empty pop-up screen closed and the items appeared on the screen with unchecked. I found that only if I manually push the CHKL botton on MCP panel when the ECL screen pop up with nothing, the screen will show the items and can be checked by FO automatically then everthing is normal. So, why the ECL i…

In general i do not use default ATC, however i tune to active frequencies just to hear ATC communication. That greatly improves atmosphere and feeling of being there. I was thinking if that is possible to update FS2Crew in such way that as option FO will always tune to P3D default ATC active frequency ?

I was wondering if y'all would be willing to look into updating the PMDG 777 FS2Crew to support relaunching the audio system? It's annoying that even if my headset disconnects for only a split second that I cannot get voice from FS2Crew for the rest of the flight.

Hello, Why, what ever the minimums set in the BR section for landing, during the voice checklist for descent, it always confirm 100ft...? Am I missing something? Minimums in BR are set, in the cockpit also, all the same, but yet stay orally at 100ft. Cyrille

Hi all- I'm running windows 10 latest version p3d v4.5.12 pmdg 777 sim connect 4.5 and fs2crewe 3.1 speech is set up but when I use fs2crew it seems to start normally - says "i captain" but does not hear anything I say the green bar does not display at all (disp) is selected voice selected Tried uninstalling restart and reinstalling as Admin- Config is set to enable - what am I missing? audio test works Any thoughts would be appreciated

Hi guys! I'm facing a problem with my Fs2Crew 777. I can't open the main panel and it started when I updated it. I looked over the other topics about that but it doesn't work for me. I have Fs2Crew for 777 and 747 and it works fine for the 747 but for the 777 it doesn't open when I press C (autofeather configured with C). I tried to open it through Vehicule/Instrument Panel, it opens but all black (I can't press a button)(see here: https://photos.app.goo.gl/DzeRfXfL7T6tEupH6) Thanks for the help! Nolan974

I'm having two rather weird problems with FS2Crew in the PMDG 777 1) FS2Crew doesn't recognize the word 'please'. The 737 NGX Reboot recognizes it just fine (the previous 737 version also had no problems). I say: 'Yes please' Green bar: Yes clear "Please" - Clear "Please!" - Clean up Arrgggh 2) The flight attendant doesn't understand a word I say when she asks if its OK to start boarding. None of the accepted responses register - 'yes' 'yes please' 'go for it' etc. It's not a deal breaker by any means, and the rest of the program appears to be working flawlessly, but kinda annoying nonetheless. Any ideas / suggestions? I'm on Win…

Good afternoon, Sounds stupid but... All work fine until I reach the point where I request flap 1, 15, 20. Then at flaps 20, my FO goes crazy and calls for flaps 25 then 1, then 5. does that only on 777 and 747. it is the voice version, P3DV4.4 all is up to date Any idea? Thanks for your help because it is very frustrating. Cyrille

I have been using FS2 crew for a while now ,and had no problems ,but now I get the message sdk error on the main green bar ,this is for the pmdg 747 version 2 FSX,please can someone advise what to do ,thanks Steve

Hello everyone. From the Virtual Cockpit point of view, I see the top of the PFD and NAV display. It’s like getting in your car and pressing your head up against the steering column. How do your ‘slew’ backwards to get an overall view of the cockpit. I have seen tutorials on YouTube where the the instructor slews in to focus on a subject then slews backwards. Same with the outside view. Sometimes the FS defaults to a close-up, and I cannot move the ‘view’ backwards. please.....any help would be appreciated. D3g.

Hello, I own several versions of the FS2Crew products and must report that the 777 version is broken and buggy. All other versions work perfectly, but the 777 has no sound and regularly causes CTDs. All versions I own are on the same computer using the same P3Dv4.5 install and same hardware. Save for the 777, they all work wonderfully and flawlessly every time.

Hi, Being a former customer of 777 FS2Crew for FSX, I bought the new version FS2Crew PMDG 777 P3D64.exe Order # I have P3D V4.4 After launching the installer, it says "FS2Crew must be installed in your FSX (!!!) Root Folder". (I don't have FSX on my computer). I then designated: D:\Simulators\Prepar3D v4 Then the program says : PMDG 777 not installed (while the PMDG 777 is installed and works correctly

The popup window the FO opens WILL NOT GO AWAY. Even if I put something else into the window, the popup STAYS OPEN. If i try to click int into the ECL it pops right back out. I have set Checklists to paper, but the popup remains. I scrolled through the extremely awkward cfg menu to find other settings, but there seem to be none. Thank you for your help

I started my FS2Crew for the 777, and it tells me I have an SDK error. What do I do?

Hi, I have fs2crew of pmdg777 and I have been using it like a charm. Lately, it has started giving zero audio output and also the green bar does not appear on top which reads whatever I say. However, I see that the events are being managed like the pre-flight flow and all other events which does not require our inputs. I don't know what is causing this issue but would appreciate if someone assists me. I double checked if my Hard Mute is on but no. it was off and still the software was not functioning. I double checked the speaker. This issue does not happen at the beginning of flight. It is totally random and can occur at any phase of flight. …

What is(are) the trigger(s) for the cabin crew to announce "blabla... we are going to serve meals...blabla" (US female voice)? I used to have it on FSX but cannot achieve to have it for P3D V4.4 I must admit that because I am short of time, I start FS2Crew with "RWY entry procedure" before taking off.

Good Morning Yesterday I purchased 2 x FS2Crew products of which one is the T7. I would just like to clarify something please? When using the V/Control I assume that one (Me = PF) use the headset with a microphone and then give FS2C voice commands and then FS2C will IE "set" the landing gear down. With button control I lost the plot, and last night after 4 hours & 3 YT videos I know nothing more today than what I knew 2 days ago. Can someone please help with this BC function. BTW I have read the manual and in my opinion everything i see is just about voice control. Hope to be able to get a flight in tonight 🙂 Regards and have a …