PMDG 777

Has anybody a config file for using the Vrinsight M Panel with the PDMG B 777 ? Thanks

I am not sure if this is related to the Cold and dark panel state but I set up my FMC and calculation but never get a DES NOW in my DES page only DES DIR option. I know of of the master caution bug but was wondering if this is just related to a bug as well or why I don't have that option. I have only been able to descend with my v/s. Any thoughts? I like to start the aircraft cold and dark everytime so maybe if it is a bug I will have to set up cold and dark myself and then save my own panel as cold and dark. I notice that the display always stays in CRZ mode as well. Thanks.

Someone asked me via PM what settings I was using for the PMDG777 with my new Saitek Cessna Yoke. Figured I might as well post how I have things now for all to read. (I have only had the yoke for a bit longer than a week, so things might change as I use it more) FSUIPC is not used at the moment (I uninstalled it). Let me start off by saying that I like the many buttons on the yoke A LOT! The amount of things you can do with just a flick of a switch is just incredible (compared to my old yoke). Makes flying and switching views a heck of a lot easier! The only thing that I dont like, is that the yoke is way way way to light even for Cessna (the spring …

Has anybody a config file for using the Vrinsight M Panel with the PDMG B777 ? Thanks

I thought the last SP1c was supposed to cure that flash that comes up 'Pilot Response', or is it an option in the FMC PMDG Setup?

When I open the Operations Center, a warning box informs that my system is configurated with a non standard DPI.- And certainly there are some problems with its windows sizes and edges How can I fix it ? Thanks

Hello, Since I installed my SP1c I have no sound for the ambiance, cockpit sound, controls such as flaps etc... any solution ? Best regards

Hi, yesterday i updated windows to version 8.1, then i started a flight with the B777 of PMDG, and i saw that the cloche was fully turned to the left, the throttle to full position, and all the screens were black. The cockpit was not clickable. If i move the joystick nothing happens, so the aircraft does not recognize my commands. The other aircrafts work well, and also the PMDG B737ngx. Can someone please help me?

(RJAA 011930Z 29003KT 260V340 0300 R16R/0800V1100U R16L/0900N -DZ FG BKN001 15/15 Q1007 NOSIG) As the picture show there's a shower outside but my radar do not work I do have ASN with new Hotfix5 and my FSUIPC is 4.93 It is perfectly fine when testing weather radar it never happen before but after I reinstall my FSX I have read the troubleshoot thread even install crack script and it work but not work with the software I pay money for,which upset me so much

Hi all, Require some kind assistance here as my 772LR exterior model has suddenly disappereared in game but with Virtual cockpit still around. The last thing I did was activate fsdreamteam zurich after landing at LSZH. Then wanting to do a return leg to Singapore loading the screen up, the exterior of the plane disappears but vc still alive. thanks

Hi, noticed and issue while flying a route EHAM - SPIM. Mid Atlantic, the engines shut down and restart 2 seconds later, on their own. This is repeated 2 times then all is back to normal. Failures are disabled. I have latest update on the T7. FSX with all updates ( Acceleration ) Flightplan - PFPX W&B - TOPCAT Weather - ASN Any Ideas?

Hi folks, during my last flight TXKF-BAW2232-EGKK I got the status message HYD PRESS IND DEM L. I scanned the QRH, and all other delivered Boeing documents, but to no avail: 3676 pages of official docs, but no hints... 1. Yes, I learnt my lesson that the status messages on the multi functional display are informatively only. 2. Despite the fact that Boeing feels that the crew shall ignore it, since they cannot do anything anyway during flight, I' d like to know what it means. 3. HYD PRESS IND DEM L could stand for: Don't trust the HYD PRESS indication of the left demand hydraulic pump. 4. A little bit cheating I checked the PMDG -- FAILED ITEMS p…

Any chance of getting the PA ding to play when any PA option is activated in the middle FMC or the comm panel? It's a neat menu set up and I'd hate it to just be eye candy. We need some ear candy too!

Hi everyone, flying the T7 from day one, and not had any real problems up till now. i also have the 300er expansion pack, everything working fine. however !!! 3 times i have down loaded Sp1c and every time all i get is the plane failing to initialize, a completely dark vc, no guages or mouse clicks working, exterior no gear, i just do not know what the problem is with it i have ezca & track ir installed and configured before running fsx i have read and reread download instructions as posted , i have also deleted previous panel states from the aircraft. uninstalled and reinstalled the base pack from backup.all is ok until i try to add the latest update from pm…

Hello guys, I'm having this big issue with my PMDG 777. When I load up a flight, from the moment the wheels touch the ground I get a crash to desktop without any message. The only thing I can hear before the CTD is a bit of the engines. Can someone PLEASE help me, I'm out of options. Kind regards, Rik

Hi all PMDG 777X technical/system experts, I have programmed the Opencockpits MCP, CDU, COM, EFIS and ATC to work with the 777X, but have still to do the power sync of these units so they power ON/OFF as in the virtual cockpit. I wonder if anyone could tell me what electrical state ( SDK Variables status) the cockpit has to be in to 1) power on the MCP displays ( IAS, HDG and ALT) 2) power on the PEDESTAL units 3) power off the MCP displays 4) power off the PEDESTAL units 5) power on the CDUs

I've made this for myself but thought like the NGX/JS I would share it. Please Note: You will need to know how to operate the 777. I have uploaded it to my business web site, here is the link. Enjoy! http://www.limegallery.co.uk/originals/oils-and-acrylics/i-cant-forget-2/777-2/

Surfing the net for taxi or maneuvering cam, I found this http://www.mycockpit.org/forums/showthread.php?t=25777, I wonder if PMDG is implementing theirs in the same way!

Hi, Does the documentation currently supplied support not only the 777-200LR/F, but also all the variations of the 777-300 series, or are there plans to provide documentation for the 777-300? BTW, I'm about to start reading the existing documentation soon. I have all the updates and have purchased the 777-300 add-on. Bill Clark

I just saw the message during when i flight to destinaiton airport, computer said "your computer has run out of available memory", and i research about this VAS problem. And i curious if i buy more physical memory to upgrade my computer memory to 16GB can be avoid OOM ?( I still using 8g) Thanks

I searched online before posting this so it wouldn't be a repeat, forgive me if it's on here somewhere. For over a year, the PMDG777 has been working perfect for me. Suddenly the last few flights, it's not pausing at the TOD. I double-checked that it's set to "on" in the settings, which it is. Any idea why it's suddenly continuing at cruising altitude and not pausing? Thanks in advance!

Hello All - Hopefully i'm not asking a repetitive question, but is there a way to have the landing gear camera view (such as the one from the PMDG website) show up on the instrument panel? I don't know if i'm searching for the wrong keywords or if this is even possible. http://imgur.com/OedbudI Thanks in advance!

Hello, the 777 P3d is on the website of PMDG. So I think an release is not to far away. What is about the FSX PMDG 777 owners, will they get the P3d version for free or for a lower price ? Looking forward to the answers)

Hi, I bought the PMDG 777 a few days ago and have had 2 instances of strange behavior on approaches. The first time was an approach to LFPG (Paris Charles De Gaul) Runway 26R ILS 109.10/266. Had flown a short flight from Zurich and all was well till 10NM from touchdown. Once on approach path 266 I selected LOC to capture the localiser and suddenly I got an FMC message 'Descent path deleted' I got a bit of a shock as my aircraft started to climb rapidly. I disengaged AP and Auto thrust and landed the aircraft manually. Anyway I though I would try again selecting a different runway today ..so took off from Zurich again ..no issues on flight till.. you know it... lined up pe…

Hi, Wouldn't it be nice if we could customize within each livery setting how many seats are is each class, if we could decide whether its a plane with just First and Economy class, or maybe all Business, or Economy and Economy Premium and Business and First? for example ELAL has: 12 First class seats, 35 business class seats and 232 economy seats. and British has: 14 first class seats, 48 business seats, 40 economy + seats, and 122 economy seats. Is it possible for the PMDG T7? I think it will improve the level of realism.