LINDA Support

Just wondering id somebody took the initiative and create Linda file for this nice A/P ??? Cheers Yair

I cant seem to find the strobe lights control for pmdg 737ngx so that I can assign to control the strobe lights. I cant find it listed under pmdg/lights in linda. does anyone know how to control all the light control switches seperately using just buttons and switches.

I am not getting a beeb as i rotate my 3 position rottery knob on my Saitek ProFlight yoke and TQ along with a Saitek switch panel (using SPAD). Iam not using the globel setting. It does work when the FSX Defualt aircraft is loaded. if i add the Shifted mode on release but of course that moves everything around. Anyway of adding this to my aircraft profile? Flight1 B200, I did inport the default aircraft profile and now i have days invested in this profile. Thanks

hello...could semeone help me cause the leveld and the pmdg give me an error with mcp combo 2, other addons work, the rotary turn normally but the displays of the mcp combo return bloked to 220 hdg and 00000 alt for level d and 220 hdg and 00100 alt for md-11, i searched in the forum but finding nothing......could someone help me? thanks

I have tried 2.6.3 (both versions) and 2.5.7 with basically the same results. All versions function but with 2.6.3 v2 I have to toggle the select plane button several times for it to get the plane loaded. Not really a problem for me. The two that are troublesome: 1. "Range Check Error" pops up frequently when a different plane is loaded....not every time though. 2. Linda NEVER shuts down normally. I must click the "close the program" button. There is immediately the popup regarding some improper activity (cannot recall precisely). With 2.6.3 .v1 there are two popups re. improper..... Is there anything I can do to correct these? Regards to all Neal Howard

Whenever I load the A2A Simulations Piper PA-28-180 Cherokee I get the following error in the LINDA Console: Does anybody know what this means and how I can get rid of the error?

All LINDA users are advised that no compatibility testing with Windows 10 has been carried out with the new Windows 10 release with any of the compatible flight simulators (FSX, FSX-SE or P3D). I have no intention to change my working or development systems until the new operating systems is proven to operate flawlessly with my setup and development tools. However, if LINDA users have or plan to cross to the dark side, please report your experience and success/failures here. There is nothing I will be able to assist but it will help others.

Sincerely hope that there will be a nice guy who can help me on this: I do have a V320 Overhead and FCU Combo from VRInsight with me. Unfortunately I do encounter two issues: Issue 1: Ext LT (External Lights) on V320 Overhead are not working correctly in Aerosoft Airbus Extrended X Description: (i) Strobe Light – There is no corresponding action in FSX after I switched the Strobe light On/Off button (ii) Beacon Light / Wing Light / etc – Those lights are working as a toggle rather than ON/OFF basis. Hence, I need to switch Off then On to have the light in FSX “ON” and then switch off then On again to have the lig…

Hi everybody out there, ​ First of all: I`m very happy that there is such a perfekt pogramm like LINDA published - just awesome I bouhgt Aerosofts Airbus A318/319/320/321 because I am looking forward to build a small cockpit-simulator with that Software. So know my question: Is it possible to export variables like the AP ALT, AP HDG or the Battery-levl out of the Airbus via FSUIPC+LINDA?​ (Ofcause I know,that it is possible to conroll buttuns,... with Linda, but it is also possible to export some Variables ot of the Airbus?) And show this figures via such a device: (or simply to read them with another pogramm them?) http://simple-soluti...&products_id=62 with …

I was making a short flight with the PMDG 737 NGX a few days back, when I noticed something odd: after takeoff I would lose all lights on the MCP in the virtual cockpit, as well as some parts of the overhead panel. Also, the overhead showed several warning lights that had been off while still on the ground. I later traced this to the moment I raised the landing gear using the Saitek Switch Panel. All switches were in the off position, which I hadn't noticed since I don't normally use them for the NGX. Because my definitions for the NGX mode did not override the "Default FSX Aircraft" settings to "Do Nothing", my first usage of a switch (the gear lever) caused LINDA to…

Hello All ! Had no problem to assign the fuel selector switches on other AP, but for some reason it doesn't work for the CT206H. Any idea ?? Thanks in advance Yair

I'm trying to setup LINDA for a default aircraft and so far everything seems to work fine, but now I'm at the cowl flaps, but I cant find the assignment for it. Could someone please point me to the list where I can find the cowl flaps assignment?

Using version 2.6.8 (147) with the turbine duke v2 when undocking the virtual cockpit view I receive a range check error and it will not sync in the aircraft profile window and the profile is unuseable. When I close the undocked window linda will sync with fsx and everything works any ideas?

Everytime when I exit Linda V2.6.3(148) , with or without the Sim running I get an access violation message as in the pic, I run W7 64 FSX P3D FSUIPC4, Version 4.939v this is the event log Log Name: Application Source: Application Error Date: 18-Jul-15 4:12:28 PM Event ID: 1000 Task Category: (100) Level: Error Keywords: Classic User: N/A Computer: aero-PC Description: Faulting application name: LINDA.exe, version: 2.6.3.148, time stamp: 0x55072775 Faulting module name: LINDA.exe, version: 2.6.3.148, time stamp: 0x55072775 Exception code: 0xc0000005 Fault offset: 0x00350a2f Faulting process id: 0x161c Fa…

Hello, just recently reinstalled my rig into windows 10 and decided to take the plunge into FSX Steam on it. Installed the latest version of Linda (2.6.3), as I had previously always used v1.xx on my Win7 install. One thing I noticed it that whenever I press and release the configured "Shift" button on my joystick, it now makes a beeping sound, which it didn't do before with Linda v1.xxx Is there any way to disable this ? Thank you. Mathieu

Hi all, Today I suddenly started having troubles with LINDA, which I've had installed for over a year until now. My AV software (BitDefender) detected a virus in the exe, and proceeded to completely disable it. I am now unable to launch, move or delete the main executable. Trying to get LINDA back, I've downloaded the latest release, and renamed the main exe to "LINDA1" (Can't replace the now disabled old file). My issue now is that while the new LINDA executable technically does start, it is not more than a process in the task manager. The more I try to start it, the more processes appear. Nothing at all appears in the taskbar or elsewhere. Would anyo…

I had Linda working, but after I reinstalled my system, somehow the switches arent responding anymore, while I did the same as last time. The only change has been that a new version of FSUIPC is installed, but rolling back to the former version, doesnt fix anything. I assigned switches from several controllers to several different functions, but non are working. When I start LINDA, I get the start-up message in the sim. When I save settings, I get the reload message in the sim. When I move the switches on the controller, the right switch number comes up in LINDA, I can assign the functions to those, but after saving, the switches in the cockpit dont respond. There are no…

Hello ! I'm building a home cockpit using the 737NGX, as well I'm using LINDA to configure my buttons and switchs. My question today for you captains is : There is way to modify the code to have the options to use a selector switch for the Display Mode ? I'm mean ... as the auto-brake we can select the option RTO, OFF, 1, 2, 3, MAX not just increase or decrease. It will be very practice to program these selectors. In the mean time, I'm not sure to understand what the option "show" under the disp. mode menu does. I have tried to assign it to a button, but nothing happens. Thanks to help ! Ben

I'm a newcomer and have downloaded and unzipped the files of both Linda 2.6.3 and Aerosoft Airbus to the C:\FSX\Modules folder. When I try and select an aricraft all I get as a selection is: FSX Aircraft. No Airbus or anything else. Could someone point me in the right direction? When I unzipped the files I put them into their own "Dowwnload" sub-directory and copied the contents of each to the Modules directory. The only other contents of this sub-directory prior to adding Linda were the FSUIPC files. Any help would be most appreciated. Rewgards; Noel Anderson Sheffield, MA

Folks, I'm after that first pointer to get things going from which I believe I'll be able to get there myself. I've been trawling forums and manuals for days and can't seem to unpick this - if you know of a thread, here or elsewhere, that answers this, a pointer to it would be gratefully received. My Setup I'm running P3d 2.5 on my main computer (called "Flight1"). I have FSUIPC and Wideclient (registered versions) installed and working fine. I'm running the PMDG 737 (though will ultimately want to expand what I'm doing here to other aircraft in so far as that is possible). I have installed LINDA 2.6.3 on this PC. I have a second PC ("Flight 2") on which I ru…

Hi, Have decided to use Linda to run my Vrinsight MCP2. I have managed to get it setup using Linda 2.63. All good apart from 2 things. I cannot find the assignments for the overhead c1 c2 primary elec pumps. The demand pumps are there but not the primaries. Also the pack assignments don't appear to be working. I assign a button on the mcp but nothing is happening. For all of my overhead assignments i'm using Mode 2 on the MCP. Any ideas to these 2 issues. Thanks Darren

Linda 2.6.8 (147) Linda 2.6.3 FSX PMDG NGX 737 Trying to connect Linda to FSX and get the following error. ------ Setting the hooks and direct calls into the simulator ------ --- CONTROLS timer memory location obtained ok --- SIM1 Frictions access gained ASN active function link set --- FS Controls Table located ok [E] VRI port 1 "com3" failed to open --- Installed Mouse Macro hooks ok. Wind smoothing may be by ASN, not FSUIPC, if it is running Will switch smoothing action when ASN starts/stops --- G3D.DLL fix attempt installed ok --- All links checked okay I have reinstalled the Vinsight drivers and updated to the latest FSUIPC (register…

I have two buttons which I am not sure how to assign to Linda. Stab trim Normal, and cut out, main elect and auto pilot. Any one who can help me out here? Morgan

Hello, I would like to save the file actions.lua VRS the FA18, all lines for DDI left and right. The draw gives me linda , Lvar: is SW LDDI PB = 1 , and SW LDDI PB = 0 I coded this: function Left_DDI_1 () ipc.writeLvar ("SW LDDI PB: 1", 0) ipc.writeLvar ("SW LDDI PB: 1", 1) end but the button does not work, can you please give me the solution. Thank You

Hi, Translation google : is there a file in 'linda', which would include for each joystick button number and the assigned function in linda? I found a file: config.hid in the aircraft folder, but it does not indicate at all the button number presser and other. Thank You