LINDA Support

Hey guys, I am unable to download version 1.3 of the RealAir Turbine Duke module. It seems to me that there is only 1.1 available. Any suggestions? Or is anyone provide a new/working source for me to download this module?

Hi there, I've been looking around the forum for an anwser, but no luck. The problem is that whenever I rotate the knob on my Vrinsight Multi panel the input into p3d (PMDG 777) is very slow, even that slow that I have to wait to let the plane catch up to my rotation's. For example I rotated it 10 times, it takes quite some time to do so. And if I'm going to fast it won't even do anything. This problem also goes for the heading and altitude. Is there any way to fix this winthin LINDA or in the code? Regards, iMoveQuick PS: I'm using the config for the 777 that you can get on this forum.

For some reason, twice now over the last week I get a CTD with P3Dv4.3 while using the latest LINDA module with VRi MCP2 and the latest FSLabs A320 module. It happens after the flight has gone on for some time it appears. Last night I was using the MCP just fine but what was weird was as I passed through 10k I hit a button that I have programmed to turn on the landing lights. As soon as I hit the button, CTD with the ntdll.dll as the faulting module. Now I had just used it a few minutes prior so I don't think its and issue of the the USB going to sleep. I know this is primarily a memory corruption issue with this type of CTD. The previous time was when I went to move the …

Tried to download PMDG JS-41 but sent to a Russian site. Same with a few others. Neal Howard

My three VRinsight products, two of which are using LINDA support software for MCPII and FCU, are now very good. However, the VRinsight CDU II is not available now, and LINDA has clearly told me that it will not be supported and that the manufacturer software will not be updated. Then my VRinsight CDU II has no hope. Can you tell me what other software can support VRinsight CDU II? Thank you

Hello! I found a link to the topic here on avsim which is pointing to the Comanche module. https://www.avsim.com/forums/topic/470556-a2a-piper-comanche-250-module-version-250/ But the link is dead... Anyone with a working link? Thank you!

Hi at all, im testing the PMDG module 1.41 in p3dv4 with the MCP combo general 1. the mcp combo display show correctly spd hdg alt values and the encoder work great. all the buttons and switched no, died! 😞 no sign of alive. Can you help me? Thanks , Simone

I understand that LINDA does not support keyboard commands. The user manual indicates that this isn't necessary since FSUIPC supports keyboard commands. I've used these keyboard facilities in FSUIPC with great success. The thing I'm missing, and where I'd like help if possible, is how to identify the control codes needed for the keyboard in FSUIPC. Can this information be obtained from the actions.lua file? Or by some other means using LINDA? The reason I ask is that i'm using a gaming keyboard (Razer Black Widow Chroma) for many of the common push button and rotary knobs in aircraft. For each aircraft I assign various control actions to different keys, and u…

Hello, got LINDA 3.0.7 with FSUIPC 4.974. When I go to edit my joystick button functions, the actions that I select are not saved, even though I do press the save button. In the flight sim, the button press will not toggle the selected action either. Any ideas on what mistake I could have made here? Best regards

Why Aerosoft Twin Otter Extended (module 1.3) cannot be downloaded？

the linda control panel shows all connected controllers are working fine. fsx loads like it should. linda loads up ok but my ch fighterstick disconnects after linda loads up.when I shut linda down the joystick works ok when I start linda back up the fighterstick goes bye bye.all joystick axes are calibrated in licensed fsuipc as are buttons and switches. the buttons and switches ive set up on my throttletek a320 flightbox in linda are working fine. ive unchecked power management boxes in usb hubs. im convinced linda is making my fighterstick disconnect. does anyone know why. fsx with acceleration windows10 licensed fsuipc 4.972 linda 3.07 axe v 1.…

Hello, I have Linda installed. Afterwards the settings for the PMDG 737 NGX are downloaded and installed in the folder Modules in the FSX. FSX started, PMDG 737 selected and the settings for Efis, Autopilot and radio panel set. Everything works wonderfully. Then the settings for the PMDG 777 downgeloaded and also installed in the folder Modules in the FSX. FSX started and PMDG 777-300 selected. Airplane is recognized in Linda and the MCP II Combo for Boeing Aircraft. Unfortunately I can not create settings for the 777. What am I doing wrong ? Please help. Thank you. Claus

Hello, I just start to use Linda and try to find a way to assign on a same bouton a dual function. in exemple, when I switch the button 1, I would like to toogle nav light and strobe in the same time. Is it something possible? Thanks

Hi, I have the Saitek switch panel, i have configured all the buttons in Linda, it doesn’t connect to fsuipc for some reason but it seems like it works(worked) anyways. At the start everything worked, but now for some reason the Saitek switch panel keeps disconnecting, first the landing gear lights turn off,(normal I guess). But after that i can’t use any buttons, the only fix is restarting Linda, then it works 2 minutes and it all happens again. Please help thank you philip

Hello, I am trying to download the Modules for the PMDG MD 11 (Module Version 1.2.). Unfortunately, the Link does not work. Can someone help me please ? Thank you. LG Claus

Flying halfway, suddenly all the lights of the FCU are extinguished. After recovery, do I need to restart the SIM to activate the FCU?

Hi, I have bought the saitek switch panel recently. But it doesn’t work to the pmdg 737 aircraft, so that is why I choose Linda. What I want to do is assigning the buttons on the switch panel to do something else, so for example I want the rotary knob on the left to be auto brake. I go to Linda, but there is no pmdg 737 available in the aircraft menu. So I went to my sim’s (fsxse) folder and clicked pmdg and found the aircraft, I copied it over to the Linda aircrafts folder and it showed up on the aircraft menu. I click on pmdg 737 but still it doesn’t work properly. Because when I try to click some buttons on the switch panel it doesn’t show up in Linda. The thing that i…

Let me start by saying this: I have Linda version 3.07 and fsuipc 4.974, so it doesn’t have to do with updates. when I log into Linda and I press fsx sync, I can assign my switches to do different things, but those assignments doesn’t work on fsx and I know why; it is because Linda can’t connect to fsuipc. Please help. Thanks Philip

Hi Andrew In Linda, it's possible to program the joysticks. I'm not able to program throttle reverse in P3D itself. Could I program it in Linda? Henk

Hello When I use my VRIsim 737 overheadpanel, together with P3D v4.2, and PMDG737NGX, and the old VRIsim drivers, everything works fine. However there is one exception: the 3 displays, and all of the LED's don't work, like they did in FSX. Is there a solution for this problem? Can I activate this lights and displays with Linda? Thanks for an answer. Henk

Hi, I am returning to flightsim after a long break and I'm getting LINDA installed and working, no issues there by the way it is a great product. What I'd like to know is if there is any way to access 'older' modules which are currently showing download links for the fs-linda.com website, as that site appears to have expired so the links no longer work? I'm specifically after the following aircraft, if available: A2A Cherokee A2A Comanche Milviz Cessna 310R Majestic Dash 8 Carenado P46T Malibu Jetprop RealAir Lancair Legacy Ants Tecnam Sierra LSA Many Thanks

Today I flew with a PMDG 777F from EDDF to UUEE. After about 2 hrs P3D hung up. The Event Viewer save follow report: - System - Provider [ Name] Application Error - EventID 1000 …

Hello... I can add overhead PACK 2 button as toggle - and it works.. But PACK 1 button toggle do not work - On and off work - but not toggle .. What do I have to edit ? Chris from Denmark

Latest version of FSUIPC 5, PREPAR3D V4.3v. Linda 3.0.7 Title says it all.. when Linda is synced to sim, the GUI jumps to the summary page. When I try and click to tracer, it stays there for a second and then shifts back on its own to summery. Doesn’t matter what page I try and go on. I was on 3.0.3 and this behaviour started after I upgraded. Any ideas? I tried switching aircraft type with no effect, and had no additional luas running. Paul

Hi. The program LINDA v3.0.5 causes an error: Unexpected Kernel Mode Trap. The error comes when I want to save a flight, the key is the "Ü". The Ü key is the default assignment for saving flights. So, I start the P3D and press the Ü key. Without further notice the P3D passed with a BlueScreen. It only helps to restart the computer. The error has come since I upgraded to P3D v4.3 and FSUIPC 5.1.3.2 and the error is reproducible. My system Windows 10 64-bit P3D v4.3 FSUIPC 5.1.3.2 LINDA 3.0.5 Currently I have disabled LINDA and I am wondering if I will do without LINDA altogether. Does anyone have similar problems or even a solution?