LINDA Support

Hello! Thanks for the module but unfortunately it does not work for me. I can show all the buttons with the functions but nothing happens in the simulator. All other aircraft modules work very well. Unfortunately I do not know any further. From Vienna Wolfgang

Hello. I want to control the radio panel of my Aerosoft A320 with my keyboard. I know that LINDA does not support keyboard inputs but I noticed that Linda developers have a lot of knowledge about LUA scripts which then can be used with FSUIPC for example. Is there an availlable script to do that? If not, how can I get this code to work? I think I need something like a DspShow (x,y) function. I have seen it many times but can not find any documentation on it. This is my code so far: function com1_freq_swap () local temp local LVarSet local LVarRead temp = ipc.readVar("L:Com1Freq") LVarSet = "L:Com1Freq" LVarRead = ipc.readVar("L:Com1StbyFreq"); i…

Hi, How do I close the above mentioned window that shows all the doors positions? I tried to undock it and move it to another monitor but, it will not undock. I just want to close it cause it is on my main screen and it is distracting. Thank you, Gnacino

Hello, The module in this thread is the same for the recently released Bonanza V-tail of A2A or is that module for the latter not yet available? Anyway, thanks for your effort in producing these modules ...

Hi In the great Linda-app I get an error everytime at the end of P3Dv4 and closing down the Linda-aqpp. "Not enough timers available". On the forum I read Andrew (Scotflieger) told us that this error would be solved in version 3.02. Question.. Am I the only guy with this Linda-error? How can this be solved ? Hopefully you have a suggestion. Cheers, Theo

According to the great manual written by Brian747, using the FSUIPC registrated version 4.9.7.4, using Linda 3.0.5.735 or even 3.0.9. (tried both) I have put the linda (from the install information: map Linda, map Linda-cfg,Linda.exe, Linda.lua, ipcReady.lua) in the module map of D:\steam\steamapps\common\fsx\modules. After starting Linda first the message "Linda not sync-ed to Flt Sim". I did "Action required" and the result: Flight Sim version: FSX Fsuipc Version: 4.973 ok! Fsuipc4.ini: looking good. [Vrinsight] found ok x=com3 found ok. But no aircrafts in the topfield next Sync to Sim. Just *FSX Default and --Aircrafts--! But Aircraf…

Hello, In the module for the PMDG 747-8 the TCAS-logic is not correct. When selecting "TCAS MODE TA/RA" the switch goes all the way right to the "ALT"-position. I have changed as follow (in bold and blue) and works fine, but maybe you can change it in a following release? -- ## Ped TCAS ############### -- $$ TCAS Selector function PMDG_TCAS_show () ipc.sleep(10) TcasVar = ipc.readLvar("switch_1296_74X") acftname = ipc.readSTR("3D00", 35) if string.find(acftname,"747-4",0,true) then if TcasVar == 0 then TcasTxt = "STBY" elseif TcasVar == 10 then TcasTxt = "ALT" elseif TcasVar == 20 then TcasT…

Hi, i ganged this from function CDU_L_NAVRAD() -- ipc.control(PMDGBaseVariable +CDULstartVar+ 23, 1) end to function CDU_L_NAVRAD() ipc.control(PMDGBaseVariable +CDULstartVar+ 24, 1) end in all PMDG 747 Models and it works perfectly Manfred Maier

Dear forum, I am looking and trying for solutions for 2 days but I am not able to find one. I have FSX:SE, A320 add-on from steam, Saitek panels (radio, multi and switch) and lovely LINDA. I really did look for solutions from google, youtube but I couldn't find any. I only want to use ALT , IAS and HDG knobs and want to set them. How can I do it ? Linda is working, every thick (except MCP combo which I don't have) is green and ok. I installed the necessary aerosoft old module to LINDA. And that's all. I tried something but no luck . Would you please help me to make it work? I only need alt, hdg and IAS. That's all. I know it can be done easly. May…

Hi, on PMDG_747_Introduction.pdf Page 60 Is this to read: When using a cargo variant, the nose and side cargo doors require that a power source be available, but not in use. As an example, if you are using APU power, GEN1 can be used for power, but GEN2 will need to be switched off (left AVAIL) in order for the doors to operate. Maybe dis can be noticed in lib-GSX.lua to prevent unnecessary error messages

I'm having an issue with LINDA opening the doors for GSX. I put in the code and it stopped it from opening my doors but the buttons would not work anymore. I am also having an issue with the flaps being ratracted on approach which is very annoying. I'm having problems with all aircraft on this that I have profiles for PMDG 737/777/747 Aerosoft A318-321 QW 787 any ideas?

Hello! It seems the Constellation module is lost here... is there anyone with an copy of it? Would be awesome! Thank you!

Hi, i'm new with LINDA, i have problem just with GoFlight RP-48 module, LINDA reconize it just as A:1 B:8 H:0, the RP48 have 4 rotary and 8 buttons. From Fsuipc the rotary are reconized as buttons but Linda doest reconize at all. I wrong something in config? Can you help me please? THank you LINDA v3.0.5 FSUIPC v5.1.3.1 GFDev64.dll v2.2.8.0 P3D v4.2

Hello, Simulator - P3Dv4.3 Airplane - PMDG 737NGX-8 Control System - Saitek X52 C:\Program Files\Lockheed Martin\Prepar3D v4\Modules\Linda.exe 3.0.8.808 (3.0.9) C:\Program Files\Lockheed Martin\Prepar3D v4\Modules\linda\libs\lib-GSX.lua (LINDA GSX Library 1.2) All active at LEPA Gate 23-A (the error is not airport depended) i get this with Linda Tracer [E] *** LUA Error: ...ed Martin\Prepar3D v4\modules\linda/libs/lib-GSX.lua:282: bad argument #2 to 'find' (string expected, got nil) Also, is there any description about lib-GSX.lua Regards Manfred Maier

Hello Guenther, in June, 11th 2017 in my mistake I wrote in the download forum a bug. The bug is in the overhead engine control section: function OH_ENGINE_2_START_toggle () if _tl("switch_093_74X", 0) then OH_ENGINE_2_START_on () else OH_ENGINE_2_START_off () end end Can you please change the value "093" into "092" In your next version, Best regards Charly

None of the knobs or switches are working on my VRi MCPII. I've downloaded the newest Linda and module. Have PMDG recoded the new -8? Best regards Charly

Hello. I just downloaded the newest LINDA from the downloads page and I still see LINDA 3.0.8. Is there a 3.0.9? If so where may I download it? Thanks!

Hi Günter, Thank you very much for the quick release of this module. May I however point to two things that came to my attention: 1) the Prop Heat Toggle command is not working (switch does not move) 2) the GPS/NAV toggle command is missing. The FSX default command is unfortunately not working Other than that the module works great (as usual). Thanks again! Oskar

I try to download and open it but it's damege!

Hello! I use LINDA for a short time and have a Problem with the new A2A bonanza, but also on other aircrafts. When I assign the Autopilot knobs (Master, HDG, NAV....) I have to assign on push AND release the toggle function. But now the knob is pushed twice (on and off). When I assign only toggle on push nothing happens. Maybe I dont get a basic of linda? Thank you!

Hello. I fly with P3DV4 + opus (for the weather) and Linda to communicate with the MCP Combo 1.I created or completed aircraft profiles and everything was OK. Except that this summer, I had updates (for example of my antivirus, etc ..) and since I have certain functions of the MCP that no longer trigger action in P3DV4. I went to check that Linda was well configured => it's OK.These malfunctions occur on some profiles for example with my profile pmdg 737 I can change the heading but if I put the baron 58 with the profile beech_baron, the heading button is inoperative. Similarly some aircraft and profile, I can not directly with the combo change the frequencies of com1,…

How to maintain the original settings of each module after upgrading to LINDA3.08

Hi All, I am new to LINDA and VRinsight FCU Combo. Have installed the latest FSUIPC, LINDA and Module for Aerosoft. However, when I run LINDA and select Aerosoft A320, the program reported USER module creation error and termiunated. Linda2.log read: [MAIN] LINDA Version Ver 2.8.9 (446) initialising (1702111406) ... [MAIN] Can start ... [MAIN] Opening Main form [MAIN] LINDA Ver 2.8.9 (446) GUI starting... [MAIN] Fonts added [MAIN] News added [MAIN] HID OnArrival 29E4FF0=046D/C52B [MAIN] HID OnArrival 29E4F30=046D/C52B [MAIN] HID OnArrival 29E5230=046D/C52B [MAIN] HID OnArrival 29E52F0=044F/0404 [MAIN] HID OnArrival 29E53B0=046D/C52B [MAIN] HID OnArri…

Hello Hope this is the right place to ask my question. I'm still a real newbie when it comes to LINDA but perhaps someone can help me out here. In the Realair Turbine Duke, I can see in the Linda Console which event is triggered when clicking most buttons. In the picture below for example for Autopilot main button, HDG, YD etc, all is registered in the console. However, the VS button (which simply shows the vertical speed selected) doesn't trigger any event that is recorded in the Linda Console. Does this mean I cannot assign this button or is there something I'm missing? Been playing around for hours to get this button to work but I just can't figure it ou…

Hi there From the Q&A post here on the forum I'm aware of the 10 HID limit in LINDA. Is that limit of 10 for detected devices can you have more than 10 devices and choose which 10 you want to use in LINDA? I know this sounds like a silly questions, but I'm on a mission to get my Elgato stream deck working with LINDA. For that I need to create virtual joysticks using VJoy and map hotkeys to joystick button presses - that works all well. Now the stream deck only has 15 buttons, but you can make folders in which more buttons are nested. But for every group of 15 buttons, I need to create a new virtual joystick. So I'm just interested to hear where the limi…