Voice Control Version

HI every one....i install FS2Crew more times ，i can‘t find this problem ，i use window 7 64bit (Chinese) I have the English (US) speech module installed,i choose it too, first all , i open my fsx and choose pmdg 737 NGX ,then, i will be load game and open FS2CREW,until PRE-flight check ,i say "preflight checklist" ! FS2CREW is not Identification ，i always re-install my window7 again and again , i think window7 is okay ! ...oh! last one ,,,if i botton PA say" one coffee please" FS2CREW Can identify, only this one........... If i say ohter anything FS2 crew will be not Identification How to do Solve this problem!!! thank You vrey much!!!!!!!!!!

What's the procedure regarding this? n the checklist the FO asks and the only response that works is 'armed' although I would suspect you do not do this for circuits. What do you do?

Hi Bryan! I have 1.4 just installed - all is good, but i cant see any planes , and mine inclusive. No planes in map in direct link, no planes in config program ( Map) browser. What i must to do in windows firewall ? I flying in Vatsim and all is ok for sim and firewall for me. Can i see other planes in map without FSX loading? There is no map view option instructions in FS2Crew documents... Best wishes,Alexey Luzin

Hi this is my first problem ever having with this product. But recently i have been having this problem with the voice control , that when i speak into the mic the voice control said something else that i didn't say . An sometime with out even talking it gives out weird number like one one one one one Etc . With out me saying anything. So this is what i have done so far i have try testing my mic in speech recognition an past all test very well. I have uninstall the Fs2crew pmdg 737ngx an install it again . An am still getting the same problem . It really bothers me when am not even saying nothing an on top of me screen in green bar said Captain : one one one one one etc…

Bryan - have you access to any female FOs - it would be nice to have a choice - there are an ever-growing number of female pilots these days and they should be represented (so my wife says ).

To request the FSPassengers Mini Panel display fix, please PM me with your: 1. Full Name. 2. Order Number. 3. Point of Purchase. 4. Email address. I need all four before I can send you the fix. Thanks,

Now that Version 1.4 is out, don't forget the link for the Flight Tracker! Here it is: http://fs2.fs2crew.c...eTracker/map.do You can click on any plane to view available info. More details on the newly released V1.4 can be found here: http://forum.avsim.n...d/#entry2336555 Cheers,

For realism I like to keep the main panel minimized as much as possible. So to open the PA or BR windows, I first have to open the Main Panel, then click on the PA or BR buttons. I know that you can open the PA window directly by using the Captains com panel, but is there another way to open the PA or BR windowns directly? Thanks.

READ-OUT SUPPORT EQUIPMENT FLIGHT RECORDER INTERFACE is there such a program for PMDG 737 to analyze flights?

Hi, I'd like to do a own new voice set for FS2crew. I'd like to know where the voice files are saved so that I can edit them in the way I'd like to have them. Generally I knew where they were on the MD11 version and back then I also modified them, but I can't find them for the NGX. Could you please tell me where they are? If I can find one willing to do it I'll propably also do a female voice set lateron (Yeah I think we all want one in the end, right? :LMAO: )! Thank you for your help!

Hi Folks,maybe someone else is having the same problem here.I am using EFB from Aivlasoft, and did not have any problems with it. But since SP1c and FS2Crew I have a strange problem. After around 35-45 Minutes of running the Aircraft (normaly when all Checklists are done, this is about the time when I enter the Runway) then FSX start stuttering in an 2 Seconds intervall. It first stops again, when I shutdown the "Dataprovider" from EFB. I allready asked in the EFB Forum, but there where no ideas until now.Also, am I not sure, if it maybe only is PMDG SP1c related.Is there anyone out there who can reproduce this ?

Hello. I have not noticed any stall warning checks being performed during the pre flight. is this something that the captain would perform? Thanks. Dennis

Hi Bryan, I don't know if this has already been asked, but could it be possible, in a next update, to include the FO call "80 knots" during landing deceleration? Thank you.

I use Fs2Crew 1.3 and I have installed Servicepack 1C for NGX I have a little and annoying problem when using the Fs2Crew Pushback. When I use AES pushback everything works correctly, but AES does not work in every airport in FSX, so I would like to use the Fs2Crew Pushback in those airports. I use the commands: Cockpit to ground We're ready for pushback and engine start Brakes released Start sequence is 2 then 1 Start engine 2 Start engine 1 Every time I have to say STOP Pushback, and then it stops for a second or two. Then I say: Brakes set You're cleared to disconnect and go to hand signals But then it automatically continues the pushbac…

Hi Bryan, I am having problem with VCV, "PREFLIGHT CHECKLIST" including RWY ENTRY PROC goes flawless. After takeoff VCV stops responding. Specially some of MCP commands. Starting SELECT and SET. I didn't try OH panel commandants yet> Speech Recognition works well, I have no problem until Takeoff. (I never had any problem PMDG -747X VCV). I uninstall and reinstall VCV. No success, Will you please advise . Thanks

I`m using FS2CREW-NGX since it has been released. Without any trouble. Today I configured the pushback panel but selected the wrong pushback site (right instead of left hand side). I noticed it while the push starts in the wrong direction. So I called: "stop pushback"! He stopped, but unfortunately after the "set brake" command, the pushback starts again. I wasn`t able to stop it. This is really frustrating, because it is not possible to continue the flight. I know that other users experience the same issue, so Bryan, you have to do something!

After researching the manual, it appears that the only way to have the 1st Officer execute a “Prefight” properly on a Through Flight, is to go thru the complete “cold and dark” setup, complete the flight, and then only perform the “After Shutdown” check list to preserve the powered panel state. Once done, then you can begin a second flight with the panel powered and call for another Preflight. The 2nd time thru the Preflight, the 1st Officer will do the panel setup differently, taking into account the previous switch settings. However, what I am looking for, is the be able to begin my day with the airplane already in a powered up state as I and my 1st Officer relieve…

Bryan, when the FS2Crew First Officer moves switches, knobs etc., the hand-shaped mouse cursor appears, and this causes the well known fps decrease in FSX. Is there any way to prevent the cursor from appearing following FO actions? Thank you.

Hello Bryan. Loving the NGX with FS2. Just purchased Radar Contact and also It's Your Plane (for the voice control of ATC commands) I've configured them to where they work great, however, if I am running FS2 (which I always am) I cannot give voice commands to the ATC. I have a dedicated button to mute FS2 so I can make a command, then when released it mutes the Windows voice recognition. That part works fine. But, when I push the button to give an ATC command the red "M" appears in the info panel of the FS2 main panel. This is preventing radar contact from 'hearing' my commands. Can you suggest another config.? I set up the two way voice/mute switch through FSUIPC which h…

Hi When using Pushback and when I want to stop it before the end I simply say stop pushback. Setting the parking brakes after but the ground still would announce Pushback complete after this and then the roll would continue forcing me to hit shift p to stop it again. What triggers the doors on arrival? Thanks Michael

I was told by ATC today "No speed restriction" below 10,000ft, so I used the FS2Crew voice command "Delete the speed restriction" but nothing happened. Does this command refer to the Speed Restriction in the CDU climb page 250/10,000, which is what I was trying to delete - in the end I did it manually. I tried this several times with the correct response in the green bar, so it was recognising what I was saying. Glen

Hello Bryan, I was wondering whether there is a L:Var or offset that I can check to detect whether FS2Crew is active or not? The reason why I ask is that I have a home built overhead panel (of sorts!) which I've programmed using a Lua script and I'm finding that conflicts sometimes arise when a VC switch is operated by the FS2Crew FO and the switch state disagrees with the state of my hardware switch. It will be useful if I could program my Lua script to check whether FS2Crew is active and if so to ignore conflicts or switches that disagree. I could of course just terminate my script when using FS2Crew but there are some switches that I would still like to use…

Guys, does anyone have FS2Crew NGX and FSINN on a remote computer? I currently have AES2012 and FSINN on a remote but I need my mic on my Server computer for FS2Crew, but I'd like to get her over to the Remote computer, is this possible, has anymore done this yet? CHeers

Hello I use FS2Crew 1.3 when I ask the first officer set course and frequency, failure appears on the CDU, photo attached, flight destroyed result, can not return to manual, the aircraft is uncontrollable Have you an idea? Thanks sorry for my bad English

HI guys, this is a long over due post, but i needed to be sure. my last 3 attempts doing a flight KATL-KDCA during the Descent checklist FSX crashes. Last 3 flight during this specific action. about two weeks ago i updates the new sounds and forgot to back them up. I realised that i wasn't getting any voice or sounds from the PMDG so i uninstalled the PMDG, FS2Crew and did a system restore. I reinstalled everything including the SP's ( all). Since then the 3 flights ive attempted has crashed during descent check list. Any takes on this? Sean