Voice Control Version

Out of the blue my FO no longer calls rotate, V2 or Positive Rate, any ideas?

HI all, Ever since I installed the 7600 expansion for the ngx I'm getting an error that says, "Warning unable to initialize the sdk...". I have fsx set to load default 2d panel and have re installed all my liveries, deleted livery option.ini and re installed sp1c. I'm out of things to try please help! :(

It´s impossible to do my FO take some action when i asked "Set flaps 1,2,5 15.30...etc etc speed ". It understands only "set flaps UP speed". Always . Anybody has the same problem ? Tks

Hello Bryan, Is there any way to make the FO do the abridged pre-flight flow when starting up FS2Crew on the "first" leg (i.e. to pretend it's actually the second or third leg of the day) ? That is, since I rarely have enough time to complete more than 1 flight at a time during a particular day (a little tiresome to listen to the FO completing the 1st flight of the day items for every flight). I have tried to cycle through the operation modes until it returns to "preflight". Is there a workaround here? Not that this is a fault in the simulation itself, but it would be nice to load the aircraft in a powered state (NGX long / NGX short), and then sort of cat…

Ok guys as you can remember i tried to do something called NGX live awhile back had alot of members join but not much activity. This could have been my fault for not seeing it through and also the way i was approaching it. If you would like to see it come back with a reliable online server so we can actually see each other while flying please vote Steve

Hi, Just a quick question, Is there a way to change a specific .wav file in FS2Crew. The reason I'm asking is that I would like to replace the Flight Attendance's "Safety Briefing" to this one..... http://forum.avsim.n...n/#entry2458842 and Steve Inwood, a sound genius over in the PMDG Forum already made a suitable .wav out of it...... http://www.mediafire...m85y0kqybkx46mw regards Richard Oberwinkler

Hi All, Great product by the way, i use it all the time. The only problem i am having at the moment is spurious commands most of which is the word "down", i can see the text coming up even when i'm not saying anything and often it recognises a cough or something as "gear down" which is really annoying as i am having to manually cyle the gear about 4 or 5 times a flight. Is there an easy way round this such as disabling the "gear down" command? Thanks again Ceri Hurlow

How would i skip the boarding of passenger segment if i am doing just a fuel stop? John M.

Would it be possible to add a command to the FO to silence the AP disconnect alert? I have been trying to find a key press that I can program into my joystick but no luck so far. Bill Miller

Hi, I am missing the hotspot to bring up the main FS2Crew panel in the virtual cockpit (only). The click spot *is* present on the 2D panel where it works fine. I can also bring up the main FS2Crew panel via the Views menu or the keyboard command. Any idea why the hotspot isn't working in VC? (I've tried switching between button and voice modes and also uninstalling/reinstalling FS2Crew... but I can't get the VC hot spot to work. I'm sure the hotspot worked originally in FSX... but I've just started trying to install FS2Crew into P3D and I think that has affected my FS2Crew installations which have the same clickspot problem in both FSX and P3D. I found th…

can hear fo cabin crew unable to tx to them getting following msg when trying to select cockpit recorder log unable to find your cvr log file here it loads fine when reinstalling fscrew2 but as soon as i try to tx inside the sim it wipes this file any ideas?

I don't know what happened , when I click voice button, does not stay ON. Will you please advise to solve the problem. http://img853.imageshack.us/img853/4187/737xvoice.jpg

I have a UK Version of Windows 7. This means it does not come with the Windows Recogniser 8.0 English - US and only Windows Recogniser 8.0 English - UK. What should i do because The Voice Recogniser in FS2Crew Won't initialise and so does not work.

Hello all, This my first post and i am a complete noob with this and i don't know if this has been covered before. the problem i am having is this: I can only hear the FO if i have HS enabled in the control panel i don't hear him say i am going to do a walk around outside i don't hear the person giving the load sheet prior to boarding So it makes it hard to know where you are up when going through the flows Also I get a warning message that the SDK fails every now and then I have tried reinstalling a few times but no avail By the way I have the latest version of fs2crew for the pmdg 737 ngx Any help with this topic would be great, Thank you, Bedgie

Bryan, I know this is not an issue, but will it be possible, in a next update, to replace the cockpit door knocking by the FA when entering the cockpit simply with the door unlocking and opening? If I am not wrong, nowadays the FAs don't knock at the door, but open it after typing a combination on the keypad. Thanks, James

Hi all, For some reason, in the back of my mind, I thought the FS2Crew panel and the Config sub-panel would remember it's last location on the screen between FSX sessions? When I start a flight and initialize the FS2Crew panels, they always startup in the left-center portion of the screen. I always have to move them to the top-center of my screen where I would like to have them permenently reside between sessions. I also noticed that the HS button is not pushed each time I start as well. It's proably my aging memory, but I swear previous versions had no problem whith this. It's as if the current settings aren't being saved properly. What have I forgot? FS2Crew …

Is there any way to turn it off specifically for FS2Crew? I have no problem with it recognizing my voice. Ben Lim

Ok getting seriously frustrated now... I am getting a blue screen when I start teamspeak three with fs2crew running and connected to vatsim.... even if I connect to teamspeak first then start fs2crew I get the blue screen. The log states that "A clock interrupt was not received from a secondary processor" any help would be greatly appreciated Regards Matt HArdy

Hi all. I will be flying on-line tonight EGBB-LOWI on a direct connect server. 78.150.122.82 Looking to depart 21:00 zulu I am parked at Gate 42R using UK 2000 scenery Direct server connect 78.150.122.82 Anyone about feel free to come along Cheers Paul Humphries

Hi all! I've enjoyed the beautiful fs2crew voice for my NGXs for over three months now. I've noticed recently tho, in occasion of a couple of flights in Nepal and Bhutan that I did, that whenever the landing altitude was higher than 6000ft ASL on the pressurization panel after the pre-flight flows (or before start, I can't remember) tje value for landing elevation reads 6000. Any advice? Matteo Capocefalo, MED1473

Hi there, Im very new to fs2crew however ive just purchased the NGX captain set and i think its unbelievable! So thank you very much for this product. Im having a few problems with frame rates though. Ive noticed a considerable drop in fps ever since installing fs2crew. Was previously on about 40 fps, now its 10 or so. Im running an i5 3.4ghz 2600K. Any thoughts Thanks Alexei Butterwick

Have One question for the sequence lights have found this sequence, but not be equal to that run program Fs2Crew: Landing sequences Ligth : " CLEARED TO LINE UP" EXTEND " CLEARED FOR TAKEOFF" ON " CLEARED FOR APPROACH" EXTEND " CLEARED TO LAND" ON At command to run the program Fs2Crew " RUWAY ENTRY PROCEDURE" The Landing Light Move to ( ON ) ne cause they 'do not put (on) when having the Landing Ligth have The Atc commando " CLEREAD FOR TAKEOFF" Many Times to On Line The Atc scende me The Command " LINE UP AND WAIT " Remeber The Landing Ligth have Maximun Times 5 Minut to ( On ) Have a Good Day, Roberto.

I wonder if anyone else has notice this problem... Using FS2crew Voice and the NGX i noticed that the window heat lights turn on and off randomly even when im not commanding him to do anything or pressing any buttons or keys... has anyone else noticed this behavior? here is a quick video to show what i mean http://www.youtube.com/watch?v=Mt2LyQ91E5M&feature=youtu.be

Hello, I am interested in this product for my NGX. I am sure this is a good product enhancing realism flying the NGX. But I have some doubts and questions and do apologize if these already have been asked. I just had a quick look at the first two pages of threads before posting. 1) Will it take a long time to set up this program, get used to it. A lot of a manual reading, learning and training or you get used to it quite rapidly? (I know the NG procedures quite well). How long did it take you (new users) to get some routine with this program and the procedures. 2) I have the windows7 family edition not in US English :-( . So I guess I have to switch my system …

Hello, I am currently having issues with fs2crew which I downloaded today. I am flying the PMDG 737 NGX and using fs2crew for that model (voice) and everything goes swimmingly right up to the point in the pre-flight checklist where the FO asks "CDU preflight"... I reply "checked" and he then says "you may want to check that" Also, if i attempt to start engines I am told "engines are not configued for start.... After reading numerous form posts i am none the wiser... this is what I have done so far: Uninstalled EZDOK Deleted fsx.config updated pmdg airac cycle to current version re-installed PMDG sp1c for ngx ensured that fsx starts with default…