Voice Control Version

Haven't flown for a while until the last few days due to a rebuild of my FSX rig but now I'm back in business Most of the time I only have time for one leg but today I had the chance to fly a second leg without quitting FSX and FS2Crew in between and I noticed two things which I'm not sure if it's just me doing something wrong or if they are issues and if so maybe already reported ones so excuse me if that's the case. First thing I noticed was that when I asked the ground crew to disconnect external power after the preflight checklist was completed I never received a confirmation from the ground crew when the external power indeed was connected, just noticed it m…

Hi Brian, I just installed Vox Atc and a weird thing occurs. With the vox entries enabled in the panel.cfg, like shown below in red, then I loose my lickspot for the Fs2Crew main panel. ///////////////////////////////////////////////////////// // // // PMDG 737NGx - Wide Screen // // Current with Build: 1.00.3219 /////////////////////////////////////////////////////// [Window Titles] window00=Main Panel window01=Lower Main window02=CDU (Left) window03=Aft Electronic Panel window04=Fire Protection window05=Forward Overhead window06=Aft Overhead window07=Overhead Lights window08=Lower DU window09=MCP (full) window10=Radios window11=Zoomed Left…

Hey Chaps, Would there be a way for the FS2Crew and the NGX SDK to tie with passenger loads inserted by the FMC load manager? Eg, 180 pax should take a lot longer to laod than say 4 pax and zero pax there should be no boarding at all No idea if it is possible, but would be awesome Thanks Andrew Greentree

So for like 2 weeks now after reinstalling everything as something I have been wanting to do for a while and having crew working fine. She now is throwing hissy fits for no apparent reason. Half the time I go into the sim and there is no clickspot to open it in the VC or I get an SDK error. When this happens I either have to reinstall crew or sp3 or both sometimes or sometimes I can get away with going into the manager and resetting the voice control option. Then it works for a coupe flights. Also lately the FO will not start the 2 engine. The voice display keeps thinking I am saying start number 1 but I am not. This is after starting number 1. This was working fine at fi…

Hello! Sorry for my english. I have a soft mute is not working. When I click the button on the controller to communicate with online atc fs2crew continues to be my vote,Although the red light is the letter M,this happened after I bought the USB headphones "RAZER MEGALODON". What's the problem? Thank you!

Unless I've missed something, the FO doesn't automatically play catch up. So, for example, if you open up a saved flight, for example in the cruise or on short final, and then click through the FS2Crew modes to find the right mode for your current flight situation, the FO doesn't know what's missing and switch things on that are required for the current flight mode, but which he would normally have switched on earlier in another mode. Right now, he just proceeds as normal from the beginning of the mode in question, but ignores anything else that's not quite right, doesn't he? If my assumption is correct, then how about a "catchup button" in the CFG window, which would…

Hi, I have just tried to start Fs2crew for the first time on our Community server and received the SDK error while starting Fs2crew. All works fantastic in free flight and despite following the reccomended setup routine i consistenly get this error while in multiplayer. is there anything specific that i must do to to enable the software for online use. But after teh error the software suggests reporting to these forums for assistance so here i am :) ... Any ideas? Kind Regards

PMDG 737NGX-600 with Fs2Crew ready for departure from Estern Island SCIP to Mexoco City MMMX. Tracking view established by Fs2Crew. http://img441.imageshack.us/img441/6612/scipmmx.jpg

Please don't mis-interpret my title, I have had a blast finally getting a chance to fly the NGX with my good ole FS2Crew FO. Got it for a birthday gift back in April, but only just got a chance to install and try it out now. Which actions by the FO are blind? meaning no regard to the current status of the switch or setting? I was hoping to still maintain some of my old procedures I had developed myself for flying this aircraft solo, old habits die hard and that sort of thing, but the FO flips switches and changes screens so fast and often on me, I just want to know what to anticipate so I dont throw him off. For instance, I prefer to have the lower center disp…

Hi everyone! I have a problem with contacting the start crew when I want to start my engines and pushback. I think I do everything good so I don't why the Start Crew does not respond my call: "cockpit to ground" or "we are ready for engine start". Help me please!

I made an FSX movie, that also contains quite some FS2Crew usage. Hope you enjoy! :) [media=] [/media]

In case some of you don't read the Button Control sub-forum. I've updated the Button Version to V1.5. Voice remains unchanged at V1.4. There's was a problem with the Button Control version and Google Maps, which I fixed in V1.5. To get 1.5, login to your FS2Crew account and re-download the main installer. Note: If you only use Voice Control and you have V1.4, you don't need to bother re-downloading and re-installing again. Cheers,

Hey Bryan I never had any problems with fs2crew until 1.4, when I first fire it up there is an audible warning saying it can't connect to the sdk, (thats a bad sign :)) it then continues to some what function, but when doing any sort of check lists it keeps saying are you sure about that?, during the engine start it says its not configured properly (and it is not) if I say set heading XXX it just keeps spinning around. I have completely uninstalled, re installed both the pmdg 1C patches then installed 1.4 again, these issues remain.

Upon calling for the landing checklist I go through every item except for flaps, the system will not recognize me saying "Green Light". I have ran the voice training through windows 7, and I have a high quality microphone. When the FO ask for flaps I say Flaps 30, Green Light , It does nothing I keep saying Green light, Green Light, Green Light, Green Light, Green Light, Green Light. I enunciate very clearly with no change. The only way I can complete the checklist is by saying "Next" Evan

Hello Bryan, Thank you for the amazing FS2Crew I was hesitating for few weeks to get it because English is my second language, however, it didn’t take me much to realize that FS2Crew has opened a whole new perspective to my FS experiences with the NGX so thank you. I use the voice version, all went alright except for a small thing, I am not sure what the cause of it? When I press BR button to open the briefing panel I get FPS hit from 20+ to 2-3FPS with VC, improves a little with 2D cockpit view, and the curser changes from the hand or the arrow to that blue (W7) circle that means system is working or busy! however, The flight goes on to the end. That actually hap…

The volume of the FO is too quiet. This used not to be a problem but now, even if I turn the volume control up to maximum, it seems to have little affect. Any advice would be appreciated. Bill Miller

I would like to reduce the main panel size using this setting but I am not sure where to insert. [Window21] size_mm=642, 37 pixel_size=642, 37 position=3 visible=0 ident=1000 zorder=100 Sizeable=0 gauge00=FS2Crew2010\Versions\PMDG737NGX\Gauges\FS2CrewNGXVoice!FS2Crew_MainPanel, 0,0,642, 37 gauge01=FS2Crew2010\Versions\PMDG737NGX\Gauges\FS2CrewNGXVoice!FS2Crew_Audio, 13,13,3,3 gauge02=FS2Crew2010\Versions\PMDG737NGX\Gauges\FS2CrewNGXVoice!FS2Crew_VoiceMain, 7,7,3,3 Could anyone point me in the right direction please?

I have switched to a new monitor, which is 16x9 (vice 4x3). I've made the appropriate change in FSX.cfg, and selected new resolutions, all OK - that has nothing to do with FS2Crew. However, because for the NGX you need to make a manual panel.cfg swapout, the FS2Crew items are no longer in the new "operating" version of the panel.cfg, namely the 16x9 NGX panel.cfg. Should I just copy over the missing windows, listed at the bottom in the originally FS2Crew modified panel.cfg for the NGX, or is it more complicated? Should I run the reinstaller for FS2Crew? Thanks. * Orest P.S. This new monitor is unbelievable, the new HP 27" 'IPS' ZR2740W (LED), runni…

This applies to versions 1.3 and 1.4. When going through the pre-flight checklist, with the chocks still set, if the parking brake is off and I respond "set" to the challenge I expect to hear the FO say "are you sure about that?" but no. No reaction at all and on to the next item. Is this a bug or is there something I'm not doing right? I have PMDG's SP1c and the NGX loads in the 2D panel. Iain Smith

Hello. When I call for gear up,the FO replies "Gear up Lights off" What lights are being turned off? I seem to remember him turning off the retractable landing lights and the runway turnoff lights but he does not do that now. Thanks. Dennis

One of the two items in the Before Takeoff checklist is Stabilizer Trim. I dutifully answer with "four point six six units", or whatever was called for, but I never get an acknowledgement. I always have to defer to the generic "Set" to get by the item. I do set the Stab Trim (approx.), but it is never precisely what was called for, as I don't have the pop-ups to tell what the trim is. Could that be the issue? Might I need a (very) extended pause between four point six six and units? Perhaps something else? * Orest

Busy skies! Wonder who the two are way up in northern Norway...

During the boarding sequence, with passengers coming on board, there is a male voice (euro set) that keeps saying, what in all the world sounds to me like ... DeLorean ... as in the long defunct sports car. What is he really supposed to be saying? * Orest

Haven't said anything about this since it's not a BIG deal but the set speed seems to run away when setting anything below 250kts. e.g. You can tell it to go from 300kts to 240kts and all is fine. If you try to go slower by saying "set speed 210" after slowing below 250kts it will start to count down to 210, slow around 5 knots before the target speed and then blow thru it without stopping. The "set VREF plus XXX" does the same. The "cancel last command" works to stop it from continuing it's runaway altho another command to slow causes the same problem. Anyone else experiencing this? -Rick Oh yeah. A little cosmetic request whenever you have a spare few …

I was just wondering where FS2Crew gets the destination airport altitude from? FSX? The PMDG FMS database? The reason I ask is that now & then I get what I imagine is a rounding type error - not wildly wrong but not 1 click different from what I'd have set using the AD elevation from Navigraph airport charts. e,g, I flew Nice to Gatwick yesterday and the FO set 150ft as the destination altitude - Navigraph quotes Gatwick at 203ft. It's a very minor point and I pick it up when checking the Pressurisation Mode selector in the Preflight Checklist but I just wondered why it happens - a different data source is the obvious possible cause.