Voice Control Version

Hi Just wondering if you can clear something up I have noticed that when you use the APU/EX on start the First officer connects the GPU which is correct, then i ask for APU on the buses then after that and i call before start procedure he turns the GPU off but if I recall you normally call the ground and ask him to disconnect it? Also on landing i got to the gate and the FA flashed i say yes and i hear nothing from her, any ideas? Thanks alot

Hi ,dear friends FS2Crew team! All is ok for me - but one ... ) See corrections below! Why my PM making 500 feet collout as soon as i message to him- "Cleared" ? Independently from real RA readings.. PMDG SDK - not sending RAltitude to FS2Crew? This wrong not timed phrase is very bad for hearing in RA 1900feet , for exanple. Usualy,in Vatsim, i hitting Landing clearence in more higher RA than 500feet. And i have no reason to delay my "Cleared" message to PM to real 500 AGL. Can you disable word "500 feet" to "checked" untill best times comes? ) Let he turn Landing Lights Оn ) Forever yours, Alexey Luzin PS . Where are Byork? Is all ok with him? C…

Hi together, since this day and after updating to the 1.4 Version, i can´t hear the cabin announcements or rampagent talking anymore?!?!?! Is there something new with the settings? I can´t find anything. Reinstalled, Installed again and so on...... Thank you very much for your help. Greetings from Hamburg Martin

After flying some high-elevation airports with the NGX I really got annoyed by dialing the decision altitude for half an hour (up to 7000ft or something). Would it be possible to let the Copilot set the DA/DH using the setting made on the briefing page? Other idea would be a hidden clickspot or new button to quick-fill in the values from the briefing into the NGX. I guess it wouldn't take too much time from your side and would be a nice addition for those users landing at high altitudes.. Just an idea ;) Regards, Matthias

Dear FS2Crew team, i purchased THe SPecial bundle pack about one Week ago. and i must say i really enjoyed your product so far, it's a great addition to the NGX. There is just a small problem that really confused me. After installing FS2Crew for the NGX i reinstalled the NGX SP c and aktivated Voice Control version, i also made al the settings required for the usage of FS2Crew ( start in 2D panel ...) But after adding a few liveries ( A TUIFly livery for example) and editing some settings in the NGX FMC ( for example changing of the transition alt from FL180 to FL100 and choosing the Collins AP) the SDK failed to launch every time. the FO was not able to set val…

Hello just installed PMDG 600-700 and trying to do a flight with a 737-700 I've got an SDK error when opening FS2Crew.Is there anything I should do after the PMDG NGX737 600/700 installation and before running FS2Crew? Thank you Best Regards Henrique Barbosa

Hey guys pretty new to it all and was watching some youtube videos and noticed the two different panels...Is it possible to have the button panel which shows left and right displays with the Voice version? I think it's good to see what is basically a checklist unless I'm mistaken? What was the idea of doing away with the right side for the Voice version? Cheers

Hi there, I have a weird problem: If I load the 737-800 in ENGM and then start fs2crew with the clickspot I get a SDK-Error with this beautiful voice telling me to come here. But If I load the same Aircraft, same Livery, same Time and same Weather in EDDF everything works fine. I already disabled and enabled Fs2Crew with no success. Also interesting is, that the 737-700 and -600 works just fine in ENGM. (Haven't tested the -900 don't like that bird) So what is going on here? Greetings Stefan

Hey everyone. Would it be possible to overwrite the default fs2crew cabin crew announcements and add my own southwest announcements. I mainly mean just the safety annoucement and passengers addresses. Wanted to check if that Would work before I mess around. Thanks very much! Matt

Hi everyone how do we call the set altitude numbers for the co pilot? eg, 5000 is 5 zero zero zero How would I call FL390?

Hi guys! On ground start- all is ok for me. SDK error appear when i loading saved IN AIR flight. (NGX panel state loaded ok ) I think- i can to correct this .But HOW? Thanks.

First of all I must say that I don't know if it's a coincidence or it's FS2Crew. Last night I installed the NGX version for the first time after I changed my OS and spent some time trying to adjust the mic etc. Didn't do any flight though and the PC was shut normally without any issues. Today I tried to start FSX and it entered in the main interface normally. However every time I press the Fly Now button it crashes almost instantly sometimes asking for smartassembly and others just saying about a fatal (!) error regardless of the aircraft or location I want to use... Nothing else installed but the NGX SP2 updates (after FS2Crew) like suggested in the manual...…

when I startup fsx,I've selected a flight, then after about two minutes I get error SDK in the display and a voice she shes contact fs2crew. Speech recognition does not work anymore what can I do? Sincerely michel de bruin

Yay!! :dance: Yay!! :dance: Yay!! PMDG737NGX - Add mip functions - Correct POS button bug on CP EFIS - Add Syncro knobs value also during the flight - important for F2Crew users - Some minor optimization CPFlight NEWS! Downloading! * Orest

Hello! Really looking forward to the release! But I wonder if I have to use the button control version since I have a Norwegian version of Windows 7, and probably cannot use the voice control version then? Or is there a (legal) program of any kind that will somhow change this? Thanks!

Just a couple that are probably on my end but aren't addressed in the manual so hoping to get some help here. 1.) Sometimes I get the transition altitude coming down and sometimes I don't. 2.) I'm getting a 500' call when i'm at 8000 ' sometimes and no where near a runway. 3.) We're not stabilized when vectoring in the terminal area...not even on an approach nor even flaps 1 Any suggestions? Bill Bumgardner

Quite often during BEFORE TAXI CHECKLIST (presumably always, I can't remember!), FO repeats the "Engine start levers" item, once too early after "Anti ice" (the surprise) and once nearer the end of the list (where it should be). Also, in the PREFLIGHT CHECKLIST, FO links two items, "Pressurization mode selector" and "Flight instruments". My PMDG laminated checklist doesn't put a line space between these two, so maybe they are meant to be checked as one. But they are rather different items, aren't they? Anyone got a view on these? Thanks. Best wishes, David

1)Ok, so do I need to install SP1C AFTER I install the latest FS2Crew or BEFORE I install FS2Crew (latest version) 2) Whenever I read the Heading/Altimeters back to the F/O during the preflight, he replys with the wrong Heading...everytime, but if I'm in flight and ask him for a heading he gives it to me and reads it back properly. 3) Why doesn't the F/O read out the MCP (V2 HDG ALT) or the V-Speeds during preflight? I thought at least he should x-check the V-speeds in the FMC, no?

I have a problem. When i use a extended 3 monitor seup there is no problem but when i sometimes have to make dublicate monitors because of Tacx hometrainer software and after this switching back to normally , the main FS2crew panel will not open clicking on the hotspot Thanks Michael

Im sure this has been asked but I cant see it. Can the Pilot and copilot roles be swapped ?

As the topic suggests, is there any way I could lock the PWR/AIR SRC setting in FS2Crew config to lock at APU/EXT instead of always returning to APU?

Hi Bryan, several times I tried to run FS2CrewNGXVoice.GAU. But I was never asked to "Trust" the new FS2Crew gauge. Today I tried the Button Version, and I was asked if I want to "Trust". But I prefer Voice Control. Is there a solution? Manfred

Hi! Is there any way to increase the volume of the F/O? Its very hard to hear him over the roar of the engines... When i play the briefing and such, (when the captain speaks" the volume is okay... but when the F/O reads the checklist he is really low (the volume control in the control panel of fs2crew is set to maximum. any tips? /Niklas Eriksson

Just wanted to give you guys the heads up. After a few emails back and forth with Steve and submitting a few screenshots for the gallery, I finally got to chat with Steve on the NGX-Live TS server. This guy knows his stuff, is both friendly and approachable. He helped me out with an issue with FSUIPC then pointed out I was en**led to a free upgrade on REX Essentials, saved me£30! Don’t be shy guys, hop on-board and share in the resource of this great initiative! Cheers Paul Humphries

seems to me I read this a while back.. I only like to fly in full screen mode.. it really kills the immersion factor without it.