PMDG General Forum

Hi, can't seem to find what key to hit to operate the stairs on the B737NG... can get the doors open, and already have tailhook & wings folding allocated... but they don't extend the stairs. would appreciate if someone can help out... can't find the answer in any of the documention (so much to look at!). Thanks in advance.

Can we put the new "smooth" VC from the 1900C into the 1900D? I'm not real happy about having to pay another $15.00 to get better framerates with the newer model, but I guess it's worth it! I don't guess you guys are going to apply this new "smooth" technology to the 1900D are you?CH

I was wondering a few things about a paint kit for the 1900C.Will you release one? If so will it have layered kits for all three varients? If so that would be absolutely marvelous.Have a folder of graphics here just anxious to be painted on your beautiful aircraft.Chris

First off, wonderful work on the 1900C PMDG. It's a great bird, and it looks great. Super improvement on sounds/panel/fde over the 1900D.Now my problem:http://forums.avsim.net/dcboard.php?az=sho...id=247195&page=I have a problem with taxiing the bird. The rudder will be fully deflected, the nose gear will hardly move, making it hard to taxi. The 1900D taxi's way smoother and better for me. The 1900D will turn immediately when rudder is applied, the 1900C is lagged a bit. Also, since I have installed the 1900C , it affected the next plane I installed too.(a GA one, making it have the same behavior). I don't know what caused/is causing it.Any help would be much ap…

Hi guys, the topic says it all. yep, that's what I'm confused about; how to properly load my weights when using FS9. I'm confused because back in FS2002 all you had to do was use the load manager supplied by PMDG to load up the 737 and that would suffice. A quick look at the aircraft file was enough to confirm successful loading. But now that I'm venturing into the beautiful realm of FS9 (somewhat late I know, but that's what third world country's all about), I'm getting confused since there are two places which load up weights: the PMDG load manager and the default loader within FS9. Which one takes precedence over the other? Which one should I use? If I use first load m…

The only thing on the radio stack that doesn't work is Com 2. It shows as inactive and you can't turn the knob to turn it on. Can this be fixed? Also I couldn't seem to get ATIS to come up when I put it on Com 1 although other fs9 menu driven ATC communication can be heard. Please help.Otherwise.....Fantastic Aircraft!..... Nice Job!Mike

Just for your information:I encountered the panbel missing when using the DHL B1900C, the 172 panel was displayed instead.The problem is the corresponding panel.cfg file which has an "alias=" with a directory name where a "-" is missing.Unfortunately, I'm at work now and cannot remember the proper name, it was something like "...Cargo" instead of "...-Cargo" or so.It's easy when you look where the "alias=" line points to to find out what to correct (only 1 character).Andreas

hi have not been able to download the Sundance Air Livery if you have this livery could you e mail it to me thanks in [email protected]

Captains-If you downloaded any B1900C liveries PRIOR TO 29MAR05, you should delete them, and redownload.We made a minor change to the installer that will make them more effective.Sorry for the inconvenience.

Good evening.Since the first version of the PMDG 737 came out until the 737-800/900 versions, numerous tutorials (PDF or video forms) have been written by many authors. There must be at least a good dozen of these works in English, French, German, Italian, Dutch, Spanish and probably many other languages which I do not read. I have downloaded many of these. I do not mention here translations but original texts.To write such a tutorial is very time consuming. I personally know what it means for working myself on a specific personal project. Let me express my sincere gratitude to all of you.One thing although puzzle me at this point. How comes that not two tutorials proceed…

HI..Have installed 1900C for a second time and now have everything working except when using 2D panel i cannot see the landing gear or wheels when in VC view..they are visible in other views but not in VC view..Thanks for any help...TH

Was coming into land runway 28 eddn landed fine under a/p but when i disengaed a/p pulled throttles back nothing happened the plane kept going at full rpm ..........anyboddy experienced this yet.......robin

I know I beat this to death over a year ago, but if you guys had listened to us all, you could have been done with it by now and making $$$$ !!! Please do a Saab340B for us. I know everyone says "someone else is doing it", but come on, we've heard that crap for what, 4 years now? I remember last year saying that it would be over a year before the other company did it, I think they replied "no, very soon, you'll be surprised, almost done, next couple of months, blah blah blah, etc. etc. etc" Look, every company/group has unforeseen circumstances but when one guy's particular aircraft has to live through 3 or 4 company fiascos, over a span of 4 years, it's time for someone…

Captains-As some of you know, I have spent the past two months moving from the US East Coast to (near) the US West Coast. As a result I've fallen behind on a few promises that i'd made to all of you....So, with an eye toward getting caught up on my promises, here is the promised photograph of the 1/144th scale PMDG 747-400 Executive Display Model!These models are produced by Pacific Miniatures, and measure slightly less than 19" long, 18" between the wingtips, and stand slightly more than 9" tall.The aircraft comes painted in PMDG's new livery, adopted specifically for the PMDG 747-400 rollout, with varied shades of blue, the PMDG title header and balance triangle, along…

Hello,I have just purchased the B1900C, downloaded with no problems. When I double click the .exe file, a black box flickers, and nothing happens...no install. I tried re-downloading a few times, same problem.I tried right-clicking the .exe file to "run as" and got the image below.Any ideas on what the problem is? I've purchased from PMDG before with no trouble. I sent an e-mail to support@... but according to the forum, this is the better place to post.Any ideas would be great,Cheers,AlWin XP SP2ASUS P4P8002.4 GHz1 Gig RAMG-Force FX 560080 gig HDFS9

Help

To the PMDG team,First let me say job well done on the 1900C series! I don't know whether it is my machine or not but with the 1900C Freighter VC model there is something wrong with either the contact points or the model itself.. The landing gear do not compress and consequently the tires sit a little in the ground and the nose wheel does not turn. I checked all the other models and there is no problem with them. Hope I explained the problem sufficently.Thanks for all the great work!Crash**edit** My spelling really sux tonight... :S

When taking off after rotating using FD and AutoThrottle why does my climb speed go up to around 180Kias when the AT has been set to V2 of 134 for example. I thought that the climb speed should be 134 then when AP is set the climb speed would be 154 (V2+20).Do I need to enable the Speed button?It makes for a messy climb as the aircraft has to slow down considerably to match the AT once the AP has been engaged.thanksGraham

Hello gang,With the income tax return I am ready to upgrade to a new system. Thinking on a Dell. Anyone out there can suggest me which system is good to run Flight Simulator completely loaded, 737NG, all external views to the max and at least a 25 fps? I want a system that will last me at least 2 years before upgrade is needed again.Will appreciate any feedback.Thanks.JM ;)

:( Hello all!I just downloaded the new Beech 1900C! But after installation i got severe problems with the panel/gauges. Everytime i tried loading the aircraft i got an error message, that FS2004 could not load some software -- PMDG_B1900C.gau -- and that this will be deactivated. After clicking OK on all the error messages for each single gauge the plane is loaded with only the FS2004 default gauges. This happens with each version of the plane, with 2D and VC panel! I tried restarting FS2004, rebooting PC, and reinstalling the B1900C many times, but it does not change anything.There is no support for the B1900C on the PMDG homepage so far.Please can somone help me!Happy l…

Has anyone noticed who's flying the 1900C! I'd say they are a bit more famous than even the trekkies in the 1900D! :-lol LOL nice touch PMDG!

Captains,I've been chomping at the bit to release these screenshots and can now show them to you.Enjoy this beauty. I hope you have as much pleasure in flying her as we had in bringing this to you.http://forums.avsim.net/user_files/110748.jpghttp://forums.avsim.net/user_files/110751.jpghttp://forums.avsim.net/user_files/110752.jpghttp://forums.avsim.net/user_files/110753.jpghttp://forums.avsim.net/user_files/110754.jpg:-wave

Hi..Just purchased, downloaded and installed the 1900C to my FS 9.The sound is great and the liveries are nice.. EXCEPT..When I go to the 2D Panel, the panel displayed is the default Cessena panel instead of. When going to the 2D Panel + VC the proper panels are displayed.I also have the 1900D installed and its 2D panel showed up one time instead of the 2D panel for the 1900C.Never had this happen before with installations of payware products? Would appreciate any help..Thanks ..TH

Do any of the flight planners out there import .rte files for editing?

Does anyone know how to fix this issue? Has anyone ever experienced this issue? My tcas and wx radar does not work.