PMDG General Forum

Hello, Upon installing the 777, I tried to run the ops center, but it just becomes stuck on Checking for online updates screen. I have not activated the 777 yet, could that be it? Otherwise, I have let it go for 10+ minutes, keeps cpu usage up in the 90s in task manager, memory usage changing constantly but lingering at about 13mb. According to the network activity monitor it downloads a couple kilobytes from Amazon and then stops network activity.

So I check this forum daily. Yesterday, still no news on the release. Woke up this morning, checked the forum, all hell had broken loose and I'm like: "Well, that escalated quickly..." :LMAO: Looked for some thread by RSR like "03SEP13; 777X will release today", but nope, couldn't find it. I thought you would let us know?! :BIG GRIN: Still, gotta wait until the weekend to buy this beauty. :BIG GRIN:

Hello everyone, So lately I have been having some issues when using PMDG aircraft (it does happen with other aircraft to, but the problem started when I first installed the NGX). The issue is that after using FSX for a few minutes it suffers a fatal error. Anyway I posted here about a week or so again, here is the thread: http://forum.avsim.net/topic/416887-fsx-has-encountered-a-fatal-error/#entry2757962 I followed the suggestions and I created a new .cfg file, this worked for some time, however once I installed the 777 the problem came back. I tried to fix it the same way, but with no luck. So after getting extremely frustrated with my flightsim I just completed …

Hi all, Just installed my new 777 and the Op Centre too, brilliant just brillant, but I have a question. After installation the Op Centre downloaded an update which installed details of my other PMDG products, the 737NGX and J41 but it didn't make any updates regarding my MD11 and 747-400. Are these not included in the operation of the Op Centre? Thanks again for a brilliant new product.

Fist want to say what a grat product!! Very nice to fly with! But have a question.. On my flight during the appoache there was no caculations on speed. One fix on the app path i give speed restriction of160. A point before that one the speed stays automatically on 240, which a bit high too reduce in 4nm to 160kt. And also the app ref speed that shows on legs page was 170kt. But on the app reference page i set 25/136. Maybe this are real world behaviors or i did something wrong. Note: this flight was completely setup. Evey weight and data was filled.

Thank you for all of the hard work and thought that went into the 777. I put the plane in my hangar last night after a little delay because I had heavy fingers and a fixed attitude to get the aircraft. Again, to the entire PMDG Team including the beta testers, THANK YOU! ! ! ! ! !

Does the 777 speed up the FSX simulation rate during cruise. If so could someone tell me how to turn it on or is it automatic.

Hi all I have very recently acquired a new vrinsight cdu2 and am still learning how to set it up. I have learned generally how to load the module and such but have absolutely no idea how to get something going for the 777 as its been stated you can. There doesn't seem to be any instructions on how to do this but am hoping that someone here can point me in the right direction as for I don't know when a softwaremupdaye will be released with it allredy done. Thanks for any help in advance.

Hello guys, Today I´m painting my livery and when reading the manual I saw that must have a file called PMDG_777_VC_NNumber.psd, but it isn´t in the zip file. Where can I get it? Thank you Fred Matias

Fist want to say what a grat product!! Very nice to fly with! But have a question.. On my flight during the appoache there was no caculations on speed. One fix on the app path i give speed restriction of160. A point before that one the speed stays automatically on 240, which a bit high too reduce in 4nm to 160kt. And also the app ref speed that shows on legs page was 170kt. But on the app reference page i set 25/136. Maybe this are real world behaviors or i did something wrong. Note: this flight was completely setup. Evey weight and data was filled.

Fist want to say what a grat product!! Very nice to fly with! But have a question.. On my flight during the appoache there was no caculations on speed. One fix on the app path i give speed restriction of160. A point before that one the speed stays automatically on 240, which a bit high too reduce in 4nm to 160kt. And also the app ref speed that shows on legs page was 170kt. But on the app reference page i set 25/136. Maybe this are real world behaviors or i did something wrong. Note: this flight was completely setup. Evey weight and data was filled.

Hi all I have very recently acquired a new vrinsight cdu2 and am still learning how to set it up. I have learned generally how to load the module and such but have absolutely no idea how to get something going for the 777 as its been stated you can. There doesn't seem to be any instructions on how to do this but am hoping that someone here can point me in the right direction as for I don't know when a softwaremupdaye will be released with it allredy done. Thanks for any help in advance.

Hi all I have very recently acquired a new vrinsight cdu2 and am still learning how to set it up. I have learned generally how to load the module and such but have absolutely no idea how to get something going for the 777 as its been stated you can. There doesn't seem to be any instructions on how to do this but am hoping that someone here can point me in the right direction as for I don't know when a softwaremupdaye will be released with it allredy done. Thanks for any help in advance.

Hi all I have very recently acquired a new vrinsight cdu2 and am still learning how to set it up. I have learned generally how to load the module and such but have absolutely no idea how to get something going for the 777 as its been stated you can. There doesn't seem to be any instructions on how to do this but am hoping that someone here can point me in the right direction as for I don't know when a softwaremupdaye will be released with it allredy done. Thanks for any help in advance.

Hi all I have very recently acquired a new vrinsight cdu2 and am still learning how to set it up. I have learned generally how to load the module and such but have absolutely no idea how to get something going for the 777 as its been stated you can. There doesn't seem to be any instructions on how to do this but am hoping that someone here can point me in the right direction as for I don't know when a softwaremupdaye will be released with it allredy done. Thanks for any help in advance.

i go to activate the 777 and it says cannot reach the activation server check internet i have used two perfectly good internet connections still the same issue. I have contacted PMDG support and i know there busy so no answers that is ok. I have tried with windows fire wall off and i have no virus software i have had no luck if anyone has this problem or has found a fix that would be very helpful Thanks.

Hello there, earlier today i downloaded the new 777, everything installed fine however when i go into the operations centre and select an aircraft, there are no options to select livery manager, livery downloader etc. It is prompting me to buy the aircraft although it is already installed, the same thing happens when i select the ngx (which i also have installed) but when i select the jetstream which i do not have, all the options come up and it does not prompt me to buy it.

been trying for 5 hrs straight still no luck. anybody with this issue got a solution?

Hi i have a problem the flight freezes every 20s or so and then it goes on again. Doesnt matter how low is the settings. Any idea? Jiri Sekerka

Hi i have a problem the flight freezes every 20s or so and then it goes on again. Doesnt matter how low is the settings. Any idea? Jiri Sekerka

Hi i have a problem the flight freezes every 20s or so and then it goes on again. Doesnt matter how low is the settings. Any idea? Jiri Sekerka

Hello (and sorry for my bad english) :rolleyes: I'm Algerian and i want to buy the T7 but i don't have a paypal account because we don't have Visa or Master Card , so my question is : IS THERE A SOLUTION ? And sorry for my english :blush:

Hi all, Just installed my new 777 and the Op Centre too, brilliant just brillant, but I have a question. After installation the Op Centre downloaded an update which installed details of my other PMDG products, the 737NGX and J41 but it didn't make any updates regarding my MD11 and 747-400. Are these not included in the operation of the Op Centre? Thanks again for a brilliant new product.

Hi I have the new Operations Center installed and it shows the 737NGX, 777 and Jetstream 4100 but my installed 747 and MD11 are not there, Is it wrong or shoud they be there? Jack the Swede in Spain

Hello (and sorry for my bad english) :rolleyes: I'm Algerian and i want to buy the T7 but i don't have a paypal account because we don't have Visa or Master Card , so my question is : IS THERE A SOLUTION ? And sorry for my english :blush: