PMDG General Forum

Hi all,I have recently seen this product perform on one of my friends' system, and have come to the decision to purchase it myself. This product simply outperforms any addon that I have ever seen so far..A quick question still remains though. Is the possibility to change outer and inner displays to read various instruments other than default modelled in this product?No matter what the answer is, I will go and purchase, just being curious..Thanks, and wonderful effort, PMDG. Go get some christmas rest. You definitely deserve it..Balint NagyHungary

I am pleased to inform all of my fellow PMDG 737 simmers that I have now uploaded the Hapag-Lloyd Livery to my new website.I hope yall enjoy it!Here is my link...http://www.nationalhandcraftersguild.com/SQTA/index.htm

New version of 737NG has bugged speedbrakes. Unlike in previous version pressing Shift / does not change speedbrakes into "arm mode" but they still remain deployed untill A/C touches down the ground.Control lamp lits green on on the main pannel but airbrakes remain on.Any ideas?

Hi Does all the tutorials on the PMDG web site apply to the new version 1.2.I think when they were written it they were for the 1.1 version. Thanks in advance Shaun

If you can live without the REAR LEFT and REAR RIGHT COCKPIT panels and have the WING VIEWS displayed in their place this info is for you! Currently if you choose the 2D only aircraft you must *click* VC (which gives you a view without a forward panel like pushing W) and THEN look rear left and right to view the WING VIEWS. I am a 2D panel flyer and love to just hold my joystick HAT SWITCH to look at the WING VIEWS or simply press numbers 1-3 on the keyboard KEYPAD without having to first click VC for a blank panel to view them etc. So please understand a few things before changing, PMDG does not SUPPORT any tweaking, so with this understood see how SIMPLE it is to hav…

Hey Guys,Great job!!! I just installed the SU-2. Worth the wait!!I am still having problems with the fuel management though. Regardless of settings, it only burns fuel from the center tank and shuts off with both wing tanks full. What am I doing wrong???FS2002, Windows 2000 ProThanks

What gives I reply to a post and then you dont post it? I believe I have a right to my answer since I paid for this product. I can't help it that I have a dial up modem I live out in the country and can't get high speed without selling my children. I will try this again and if it gets erased I will just need to get my money back since there is a lack of support. Is there a way that one can download this su2 without having to do the whole package at one time. I am using Dap bought the darn thing like you suggested using? Left the download on when I went to bed got up 7 hours later still had another 5 hours to go it said. I had to turn it off to go to work. Came hom…

Greetings all,First let me say that I'm quite overjoyed with the SU2 so far. It's an amazing piece of work. My hats off to PMDG for their dedication to our hobby.Unfortunately, my bliss is being interruped by a consistent CTD that has crept up.I'm consistently getting CTD's whenever I attempt to access the taskbar in FS2004 when flying the PMDG 700 AS no VC/VCAB. Default paint or 3rd Party paints - doesn't matter.I'm usually attempting to click on the 'views' menu to change the zoom level in Spot view but I never get the chance - it always crashes FS.It doesn't matter if it's already in the spot view or in the 2d panel mode. It's maddening.And no, I haven't downloaded or …

Hi All,I was wondering if overhead panel in "VC" mode was suppose to be full clickable? with version 1.2

Hi All, Again, let me congratulate the PMDG team on an outstading plane! I have a few questions, however: Is the decend forecast winds actually used to affect the path? If so, where is a pilot like me likely to find these winds at different altitudes? I noticed that it is not always that the chime when approaching the altitude set in the MCP is heard. I seem to remember others reporting the same issue... All of a sudden, with out any intervention from me, my radio stack has doubled in size stretching the bitmaps. How can I remedy that?Thanks in advance, :-waveBoaz

First of all, i am very impressed by the update. Grate work!!! I put the 737 on a fresh install of FS2004 and everything is fine. I used the removal tool for Fs2002 and installed 1.2 When i want to arm the speedbrake I hit SHIFT+/ but nothing happens. When I do the exact same thing with 737 running under FS2004 it works as it always did. I tried to arm it by using the mouse but upon touchdown the spoilers did not move. Any ideas?

D/L only took about 15 minutes (thanks to cable :) ) Awesome airplane. Here is a screenie:http://forums.avsim.net/user_files/53244.jpgKBOS at the gate

Well I waited about 4 days to get the update and it was well worth it. The only thing I was hoping was the Key Commands controlling everything, just a little disappointed in that but I'm not complaining. Maybe a suggestion for later releases?Thanks again PDMG, outstanding job!Regards,

Off today, flew last night until 0530 AM went to bed until 0830AM Jumped back in at 1000AM, been flying and checking out the new "stuff" ever since. 0900PM now:) Wife's out of town, got my tea glass next to me. Life is good!

I have three successful repaints in the AVSIM forum for SU1, and was successfully able to merge an old repaint with SU2 following your instructions to add certain files...However, after creating a new repaint using the same old paint kit for 737-700 and adding it to my livery and then launch flightsim then selecting the aircraft, Flightsim immediately exits...I tried again first launching one of you newer SU2 default aircarft and then switching to the one I just repainted and addded, but its showing up grey...I checked the aircraft.cfg and saw that everything looks fine but I just can't figure this one...Any reason why??? Thanks..Troy

OK, I went and downloaded SU2. I first downloaded the PMDG Removal Tool from your new web site. OK. I ran the Removal Tool. All Gone. I ran SU2. All installed. HOWEVER, all of my liveries are gone (of course). I figured I'd just go to your web site and download them again. Right? WRONG. There are no liveries listed on your Download section. Where do I get them??? I'm looking for Continental, Aloha, and Alaska 737-700s.Steve Lewis

Like a kid on Christmas morning, I tore into my 'present' too fast in order to play with it and didn't read the instructions. Or, I should say, didn't read them carefully during the installation of SU2. I know something raced by about the panel sounds, but I don't know what it said. I do not have any sounds when clicking the switches in the overhead, including the cool attendant chime and the ground crew horn. I miss the seatbelt/no smoke chimes. I can't find information about this issue. Any insight?Thanks for a tremendous update to a tremendous product!Dave Hhttp://www.eagleexpressva.com/images/bexban.gif

The upgrade works fine for me in fs2002 but in Fs2004 it is very Stuttery. I have Windows XP,Geforce TI4200 128mb graphics,Amd athlon1800+ and 1gb ram. I have both sims set up the same in the options display section.I had no problems until I installed the upgrade.

I received the e-mail notification for SU2 and tried the link. (Was I correct to add "2" to download2.asp?) I am taken to a blank page with a small cockpit picture and the following message: "Please Attempt to download this product using your sign-on & password". I did include the password and sign-on as included in the link. When I click on the cockpit I am taken to the PMDG home page, not the download link. How do I get to the SU2 download?? Thanks. Tom

First off, a terrific job on the SU2. It works almost perfect. I do have a couple of questions which are the result of my lack of understanding of the 737-700 or are they perhaps bugs?1) During a descent and this has happended more than once descending into CYVR everything is going fine and then all of a sudden get a "VNAV DISCONNECT". What would cause this? I can send you my flight plan if you would like to take a look at it.2) Do the radios not autotune as they do in the Airbus?3) Is TCAS not modelled in the 737-700? Iam not getting any traffic displayed on the NFD.4) I have noticed when flying during the day and it switches to dusk and the panel lights automatical…

Hi!Could anyone tell me where can I download the great private repaints from the author Gary Hayes? I saw them in a few posts and they are really amazing. I searched in avsim library but just found the Air Force One repaint.Please, any help woukd be much appreciated.Thanks in advance.

What determines if I use flap 30 or 40 for landing? If it is in the chart how do I read it, or is it just pilot choice? Usually I use 30 for landing because it seems easier to handle. Same goes for takeoff, I usually fly flap 5. What do I do?Brad

This update is so awesome. So now the only way I see making it complete flying nirvana is to have my Go-flight MCP working with my 737. Knowing that there are key assignments that we now can assign, has onyone does this yet with their Go flight MCP, and if so, how did you accomplish this. Still trying to figure that part out and it is kicking my butt all over the MSFS 2004 block. PMDG team, AWESOME job!All the best

I'm getting a very annoying repeating clicking sound in the 2d cockpit. Disappears when I get rid of the cockpit by pressing the "w" key and also disappears in outside views. What's the file that has to be deleted to get rid of this if any?ThanksGoran

Hi PMDG, is there any way I can purchase your product WITHOUT a credit card?I am paranoid of using a credit card online and was wondering if there was any way this could be done without using my credit card.