Skip to content
View in the app

A better way to browse. Learn more.

The AVSIM Community

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

System Hardware: PC | MOBO | RAM | CPU | HDD | SSD | PSU etc

For discussion of issues with Motherboards, RAM, CPU's, hard disks (HDD) and solid state (SSD) and respective drivers, best desktops/laptops, and other general hardware discussions. See the Video and Drivers forum and Hardware Controller Forums for discussion related to Video Cards and Driver, and Joysticks, Pedals, Yokes, etc.

  1. Started by peppy197,

    I'm thinking of getting a 19" Sanyo LCD monitor that specifies it hasa 15 ms response time.Is this good enough for FS2004 Is it a linear relationship of 15 msallows for a 66 fps performance?Thanks for any feedbackMy alternate option is a new flatscreen 21" CRT by Samsung.I presently have a 19" CRT.Allen

    • 4 replies
    • 1.1k views
  2. Guest CHRISH
    Started by Guest CHRISH,

    I have just installed FS Terrain and UK 2000 excellent scenery Chanel Islands in FS2002 on my new 3400 AMD c/w Geforce 5950 FX video card. The FPS are fantastic well over 60 FPS +, the image quality is superb.Howver, when I fly from EGJJ to EGJB I notice that on arrival at the other Airport ie EGJB, the aircraft have sunk into the ground. It looks as if they have no landing gear ! Yet if I start at that same airport(where the landing gear has disappeard), the Aircraft are fine with the landing gear visible.Has anyone any idea's?Best Wishes,Chris

    • 0 replies
    • 666 views
  3. Started by GeorgeM,

    Can anyone offer any help with this problem: Approximately 30 seconds after inserting a DVD my comp crashes and then reboots (Windows XP). During those few seconds the normal sound from the DVD disc is accompanied by an unwanted sound which I can only describe as someone rapidly transmitting Morse code at a loud volume!After reboot the "System Recovered From a Serious Error" msg appears followed by:ERROR SIGNATURE:BCCODE: 1000008e BCP1: C0000005 BCP2: BFAB54AE BCP3: BA3108C4BCP4: 00000000 OSVer: 5_1_2600 /SP: 0_0 Product 768_1ERROR REPORT:C:WINNTMinidumpMini71704-05.dmpC:Document~1George~1Locals~1TempWER1.tmp.dir00Sysdata.xmlI went through a series of error cor…

    • 2 replies
    • 798 views
  4. Started by Mike S KPDX,

    I am familiar with 'servo pots' (I think that is what they are called) used in joysticks. I was wondering if anyone had any ideas on upgrading these items? I was thinking that maybe I could get a 'higer resolution' thus finer control by changing them out.Thoughts?

    • 5 replies
    • 1.1k views
  5. Guest boomer
    Started by Guest boomer,

    I recently had to have Windows XP reinstalled on my computer as my system was contaminated with over 25 different viruses. After the reinstall of Windows, I had to reinstall FS9 and all of the goodies that go with it.Also installed a good antivirus program.I am now experiencing some very low framerates as a result. I do know that the computer guy changed to a fat32 system from ntsf in order to make the removal of the viruses easier, but I have read that this could cause some slow downs and does not operate a efficiently as NTSF.My guess is also that he reinstalled new video drivers right over the top of the existing ones instead of removing the old ones first and then re…

    • 5 replies
    • 770 views
  6. Guest fredyale
    Started by Guest fredyale,

    Hi Folks,As a new member, this post might qualify me to be around for 90 days or so.In any event, I have a 4X AGP slot on my current Intel motherboard. I would like your opinion on the best such (obsolescent) card to override the onboard graphics.The processor is a 2.8 Mhz P4, 1Gb of memory. Am I correct in thinking that a more current 8X AGP card would be a waste of money?Thanks very much.

    • 3 replies
    • 734 views
  7. Started by ega,

    Hi,I need advice! A week ago I had a strange crash in my PC while flying in FS9. A message poped out saying that "Windows has recovered from a serious error", shown in a screen in very low resolution.After that my PC isn

    • 2 replies
    • 826 views
  8. Guest SoarPics
    Started by Guest SoarPics,

    Get 'em here: http://www.omegadrivers.net/Greg

    • 3 replies
    • 728 views
  9. Guest zdfan1
    Started by Guest zdfan1,

    Hey guys:My system is quite old but still good enough for FS2002 when I set for 640 * 480. But then I started play FS2004 and uninstalled fs2002. The problem is it takes ages to show up textures. for example, when u change view mode to outside of the airplane, the model of the aircraft and whole airport shows up first but NO TEXTURES ON, therefore, I have to wait like 2 mins to wait for all texture be put on their position, during that time, my harddriver working hard all the time. Then u change back to inside and outside of airplane again, the same thing happen again, I dont want to fly any more if like that...........crying.........now, I got enough money for upgrade my…

    • 5 replies
    • 755 views
  10. Guest daveg4otu
    Started by Guest daveg4otu,

    New NVidia driver 61.72 WHQL certified( Win XP/2000) available at ....http://download.guru3d.com/detonator/Seem good- smoothest so far with my Ti4200/AMD xp3000 . Not visible anywhere on the NVidia site so far.Dave

    • 2 replies
    • 647 views
  11. Where can I find the 6800UE OC Video Card in stock? I have had no luck getting either this card or the ATI X800 Platinum Edition. Thanks, regards, Bob.

    • 2 replies
    • 938 views
  12. Guest zdfan1
    Started by Guest zdfan1,

    Hey guys: My system is quite old but still good enough for FS2002 when I set for 640 * 480. But then I started play FS2004 and uninstalled fs2002. The problem is it takes ages to show up textures. for example, when u change view mode to outside of the airplane, the model of the aircraft and whole airport shows up first but NO TEXTURES ON, therefore, I have to wait like 2 mins to wait for all texture be put on their position, during that time, my harddriver working hard all the time. Then u change back to inside and outside of airplane again, the same thing happen again, I dont want to fly any more if like that...........crying......... now, I got eno…

    • 1 reply
    • 636 views
  13. I just purchased MSFS 2004 a couple of weeks ago and am happy with the improvements over 2002, but am not enjoying it much because my current computer isn't fast enough. So, I am looking to buy a computer to fill my needs. My goal is to max out all the sliders and still have a decent frame rate of at least 20. Is that possible, or is it wishfull thinking? I am open to all ideas and makes of computers. Obviously, I would like to spend as little as possible. With these things in mind, what computer should I buy and what can I expect.Your help is greatly appreciated.Costas

    • 35 replies
    • 4k views
  14. Guest mikeallen
    Started by Guest mikeallen,

    Hi to all,I am looking to upgrade my pc in the next couple of weeks & i am at my witts end in deciding which to go for, AMD 64 or P4 3.4ghz.Also, dell stock a 74gb hard drive at 10,000 rpm, would this have any benafit when using fs9?I am also wondering whether to choose xp pro instead on xp home.Any advice would be appreciated.ThanksMike

    • 1 reply
    • 637 views
  15. Started by Hawkeyez,

    Gang...I've just acquired a 128MB Sapphire 9600XT (finally upgraded from a 64MB Geforce4 MX440) and wondered what the best settings for it would be to achieve similar screenies to those I see posted here all the time.My rig is only a 1.7G celery with 512MB's RAM.Any help is greatly appreciated.Thanx in advance...

    • 3 replies
    • 918 views
  16. Guest buggabee
    Started by Guest buggabee,

    When speaking of hardware acceleration, what exactly is getting accelerated? I've often wondered about that. :-)Thanks,Mark

    • 3 replies
    • 1.1k views
  17. Guest Greybird
    Started by Guest Greybird,

    I know this has been covered before, but most of the other posts I found were either extremely old or extremely general requests.I've had it with my X45. The spring feels loose, the rudder rocker hasn't been centered since I bought it, it drifts left in everything regardless of settings, the driver installs seem to wonky about once a week (requiring a full reinstall), and it loses calibration at the drop of a hat - a piece of expensive hardware should be more reliable than that!I'm looking for a replacement. I am running XP Pro and don't have a gameport. I fly (or will fly) the gamut - civilian, chopper, WWII, modern, as well as other types of games that benefit from j…

    • 0 replies
    • 631 views
  18. Guest EHAM
    Started by Guest EHAM,

    Hello,I was wondering....At this moment i am currently flying with FS2002, but i would like to go on FS2004 but i don't know if I have to upgrade my pc.This is my config:AMD AthlonXP2200+1.81Ghz512MB RAM3 individuals harddisks of 19GB each so I also have a individual disk just for my FS.What do you guys think? Should I upgrade my pc or can I fly it easely with FS2002Regards,Guy Haalebos

    • 2 replies
    • 600 views
  19. This looks like a good choice as it competes favorably with the much pricier X800XT. Image quality?Noel

    • 6 replies
    • 699 views
  20. Sorry if this has been covered in the forum, but I was unable to get the search engine to work properly. I have just purchased a Maxtor 160GB external hard drive. Will be reformatting my current main drive a Maxtor 40GB and reinstalling Windows XP Home. Would like to switch over to the newer and faster NTFS from the FAT32 I have been using for years. The question is will the apppoximatly 12GB of backup flight simulation and other files work when transfered off my current backup drive which is a Maxtor 30GB FAT32 slave setup? Will I have to stay with a FAT32 system if I wish to use these backup files? Any help or suggestions appreciated. Tried to search out the answer befo…

    • 1 reply
    • 658 views
  21. I have an Asus A7N8X motherboard, Athlon XP2700, ATI 9800 Pro , 1 GB(2x512) generic PC2700 ram, and presently have it overclocked at 11x210 @2310 mhz. When in By Spd, this setting makes the ram run at 175 mhz and sets very relaxed timings of Cas 3 from Cas 2.5. The middle numbers are in the 3-4 range. If I manually try to set the ram to run at lower timings my pc wont boot. I was wondering if I upgraded to a quality brand name PC3200 Cas 2 2-2-2 1T ram would it make much difference in FS9? I know I would probably be able to get a higher FSB, and be able to run the ram at a 1:1 ratio, resulting in a higher clock speed, but would I see any noticable improvement in FS9? It w…

    • 12 replies
    • 906 views
  22. Started by jgoggi,

    Hi,I desperately need help!I upgraded mu cpu from Pentium IV 2 GHz to 3.2 GHz. Thus I had to change motherboard (now a P4P800-E) and RAM (now 1 Gb). I have a SB Live sound card, an ATI Radeon 9800 PRO 128 Mb video card, Windows ME and FS2002.A strange problem occurs when I shift to the external views (S key): after a couple of seconds after I press S, the engine sound disappears if I use FS default aircraft, only if I give full thrust I can hear the spooling. There is no way to have it back unless I quit FS. BUT the big problem is that if I use 767 PIC (that is the only airplane I use), after pressing S the engine sound is replaced by a tremendous and very loud 'buzz' tha…

    • 5 replies
    • 1.6k views
  23. Guest Hanse_1
    Started by Guest Hanse_1,

    Hello!I have some problems with my joystick with FS9.I just bought a new one (Saitek Cyborg...) which works really fine with my FS2002, but, with FS9 it moves jerkily whilst panning.I had the same problem with my previous (Logitech Freedom 2.4)Am I doing something wrong, or should it be this way?Does anyone have or had the same problem?It is really annoying......Grateful for any help.....(of course I have the latest drivers, etc.)Thanks!Hans HermanssonSweden

    • 0 replies
    • 525 views
  24. Hi All,For those want to know all there stuff name on their system,A free program, detecting all your cards,Operating System,System Model,Processor Main Circuit Board,Drives,Memory Modules c,d,Users,Local Drive Volumes,NetworkDrives,Printers,Controllers,Display,Bus Adapters,Multimedia,Communications,Other Devices,virus Protection,Installed Microsoft Hotfixes,DirectX and all detailed profile of your installed software and hardware, download:http://www.belarc.com/free_download.htmlhttp://www.belarc.com/Programs/advisor.exeThanksChris Willis[link:fsw.simflight.com/FSWMenuFsSim.html]Clouds And Addons For MsFs

  25. Guest victorwest
    Started by Guest victorwest,

    Hello,Not sure if this is the correct forum. If I use the FS9 video recording tool and copy the file to a cd, can I then play that cd on my DVD player to watch it on my tv?Victor

    • 1 reply
    • 641 views

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.