The FS2004 (FS9) Forum

There was this badass F18E supposed to come out in february, I forgot the link to it and I can't find it for the life of me! it was made by like virtual reality sims or something... anyone?

Hi all,I would like to know some of the best photoscenery addon for VFR flying, either freeware or payware. Thanks !Daniel

Sorry if this had been asked before but I did a search in the forum and did not see this specific question if its in here. I had a problem with my aircraft pulling to the left while on the ground during taxi or takeoff. I have a ground handling gauge on my aircraft panel that controls the taxi speed (Ultimate boeing Panel), so the throttles to both engines were getting the same power so that wasn't the problem. I finally resorted to recallibrating my joystick (Saitek X45) and that seemed to solve the problem. However, after starting a flight, I switched to spot view during taxi to the runway and the problem surfaced again. I determined that switching to spot view someho…

I noticed most of my islands say the keys (that is key marathon) or the smaller bahamian islands always blocked up like this?I just want to redo my flight I did in real life with a cirrus instead but i'm stuck with this :(

mine is somewhat outdated, and I feel like redoing my real life flight in the cirrus this time in FS :) I just wanted to know if I could update the airac somehow though

Hi allCan anyone recommend a good model / panel / sound setup for a DC10 in FS2004The last time I flew a DC10 in FS was FS2000 with Vanessa Leightowler`s fantastic panel.CheersJames

Has anyone who flies the Captain Sim 707 figured out a "fix" for the grossly incorrect fuel flows? In the screenshot I've included you will see what the main panel gauges say is fuel flow, for each engine...around 2550 lbs/engine. This is what I would expect for a b707-300B flying at FL310 and M 0.78? BUT the actual fuel coming out of the tanks (and, therefore, the REAL fuel flow) is around 3,600 lbs/engine. This is verified by my FSFT ACARS text you see in the Screenie...or maybe not, it's hard to read but take my word for it. Has anyone who flies this "aircraft" x( figured out how to correct this? From what I know, the 10,000 to 12,000 fuel flow should be expected for …

Hi guys, am assuming others are flying this glorious bird besides me! I have really enjoyed it, except for one problem. I find that when I plot a flight plan into my RXP GNS530 GPS (I know...non standard equipment), when I get to a VOR waypoint, the Autopilot kicks off of its VOR track. I cant get it to go to the next waypoint without manually reactivating it. Whats the best way to make it track? Granted its an older plane and this probably isnt how it was designed, but I figured to give it a better autopilot than the lousy GPS 500 from FS9.Eric

Hello everyone,I have the scenery referenced in the subject line and it seems that it didn't come with AFCAD files, because my sceneries/navaids/runways, etc, are misaligned from the visual scenery, which I can only assume means that the AFD is still referencing the default for these airports. Does anyone else who owns this scenery have this problem? If so, do you know where I can find AFCAD files to correct this?Thanks.

I've noticed that AI aircraft seem to push around the same time at hub airports. For example NW at DTW. Is there a way to change this? The results of the pushes is unrealistic and aircraft taxi through other aircraft that have pushed back in the taxi path.

Ok, love this add-on, a superb A-10. Not thrilled with the sounds but whatever.... I want to know If there is a way to make the model less shiny. Its got way too much dynamic shine.Thanks!Hornit

Is there a cfg. file tweak for more trees? I tried the treegen file in the Avsim library that gives you more trees and reduces their size by 40% but I didn't like it. I just want more default trees if possible.I'm mostly doing bush flights and my FPS is very good. I want bring the detail up another notch.Thanks.

I have them all the time now! :-(Sure would like to know what

http://fokker.avsim.net/F28.htm

Hello I just brought and installed vista last night reinstalled everything inculding FS9. I went to do a flight today and setup the keys like I had before I set the views(cycle) up to the S key and a button on my joystick however when I push either key or button it does not change the view. I have checked and it is accepting the keys to change the views but nothing is happening. If I click on view I can change the views that way and cycle back though them with the joystick button. When I get back to the flight deck view it will not change by pressing the button I have to go back to view.Anybody have this happen to them?Mike

Hi,Does anyone know how to correct fuel flows for these? I highly doubt the A330 burns 3000 at idle, and 30,000+ at 100%N1.Any help, as always, will be greatly appreciated!

I see a bunch of repaints but couldn't find a review of the product anywhere. The images on their website look intriguing. Opinions?krswen

Has anybody tried "FS Approaches! Vol. 2 - USA" by perfect flight?If so does it make default ATC vector the approach in a more realistic manner? Or could someone just explain how it helps ATC if it even does that?I am just so unclear on what "FS Approaches! Vol. 2 - USA" by perfect flight does for fs2004...????:-hmmm

This topic has been moved by the moderator of this forum. It can be found at:http://forums.avsim.net/dcboard.php?az=sho...&topic_id=23731

Hello. I'm hoping someone can help me out here.I have just noticed that my UPS AI aircraft (mostly PAI but 1 or 2 Aardvark) are not moving. They never leave their parking areas.I have checked several airports and none of them are moving at any time during the day. They show up just fine but they never move.As far as I can tell it's only my UPS stuff. Everything else seems to be okay. I could have sworn that these guys used to work.Has anyone ever seen this before and/or can give me a clue as to what's going on?Any help would be greatly appreciated.Thanks!

Hi,I was wondering if someone could point me to the place in the panel.cfg file that adjust the "view" from the 2D.I mean the view, if your looking from the 2D and hit SHIFT+BACKSPACE/ENTER etc, how it moves up and down. I don't want to move it the full UP or down, so i'd like to edit it in increments to give the desiered look.Any help on this would be greatly appreciated!!

I just downloaded the Overland freeware MD-11 and installed it (I thought) with the .exe installer, which does not tell you where it is putting the files. My FS2004 is in the default location. I can't find the airplane to save my life!I sorted my Aircraft folder by date and it doesn't show up for today. Tried searching for Simmer, Overland, MD-11 ... no luck.What am I missing?

Hello All, I have downloaded the Airbus 380 by Robert Versluy it comes with the default engine sounds and the default 747 panel and everything works fine, I have installed a Airbus 340 panel and again the panel works ok but when loading the aircraft though the stages it takes a long time to load , at first i thought the sim had frozen but waiting a minute or so at each stage it finally gets there, Obviously its to do with the 340 panel i would think as installing the default 747 panel it goes back to loading normal, difficult i know to say whats causing it but any thoughts would most wecome, Thanks, …

Hi all, I've been looking for some good Chicago scenery payware or freeware, but it needs to be downloadable, since I buy on impulse and want what I buy when I buy it. FS9 default ground textures are so ugly compared to FSX, but I don't have any complex airliners to fly in FSX yet, so I was hoping to get a hold of some good scenery for Chi-town. I noticed that really there are no good airport sceneries for O'Hare, I know flyTampa has Midway, but Simflyer's O'hare is outdated and kills performance. Also, I see Horizon scenery has Chicago VFR, does anyone know if it is available anywhere in a downloadable version?Thanks,Jeff

Hi,Does anyone have an updated version of the FDE, or a more solid one. Seems to me a 6-7