The FS2004 (FS9) Forum

Hi!I have browsed all the internet to find a solution to my problem, with no success...My problem is, I have this crackling sound, or pops and clicks, when in simulator. If I run fs9, and click on the buttons or even play a video file in learning center, I have no issues. However, as soon as I start a flight, create one or make my own doesn't matter, and loads aircraft and stuff, then I have the pops and clicks. They often come alive when pushing on throttles to spool engines. I have this sound in cessna, even in boeing. If I at this stage go back to learning center and play a videofile, it's distorted and with pops. If I play a file in windows at this point, I get the sa…

Anyone know of some good ones for the 737 series? I always fly the VC model. Can fly the VC and cabin if I need too. I have been looking for a while and I have yet to find a set.:-wave

I only fly online, back again after long brake, happily geared upp with a pfc yoke and elite throttle in fs2004. Now the question, what are the benefits of AI files, were can a read about it, what does it do?

Anybody here use default AI for FS9 and are satisfied with it. This may seem like a stupid question, but I am really curious as to how many people use MSFS 9.0 out-of-the-box and are satisfied with it compared to how many have to work to get that "100% realistic feeling". Me personally, I am not interested in realistic AI schedules, etc, I would just be interested in seeing more realistic paintjobs out there than looking at "Orbit Airways" and "Landmark Airlines"....airlines that I already know are bogus. I'm just intersted in how to add other AI paintjobs using the default flightplans already provided by Microsft.......

Does anybody know where i can find any new flightplans for Southwest Airlines

Hi everyone!I have two questions for you guys:1. Is there any way to add nature sounds to FS2004? Because I've tried flight simulator x demo and it has nice water sounds, bird sounds and other sounds that give more realism to the simulator. I want to add this sounds to the background so when I shut off the engines I can hear them. Anyone knows a way to do this?2. Is there a FS2004 version of the FSX's glider? To be exact: the Aircreation 582SL?? Because I've searched the web for gliders and ultralights but I can't find any that looks just like that one, with a delta wing...is there a similar plane for FS2004? (pd: with delta wings only, because I've found a lot of non-de…

Hi:Can anyone please help me?I have seen some wonderful repaints for the ** P51 and I would like to use them, but I don't know where to get the original. Can anyone tell me what site to go to and what file to download?ThanksRichardS

I am interested to what way you like to use to approach the most realistic weather simulation.Do you use the FS dl weater or do you use a weather program?I have just registerd a FSUIPC version and there are many weather option for external weather software so I am curious, what do you like best for real weather simuliton.

I know some Authours of panels have used gauges from other FS9 planes like the defaul 737 like the engine ignition or cross feed valve and I email a few authors to ask how they did it and they said with some add-on program that edits panel.cfg's or something and I was wondering...where can i get it from?Is it payware or freeware?Is it easy to use?i would love to make a custom panel, someone out there must know?

Can anyone give the keyboard command to open the cargo door in the 340.TksR. Churchill

(I'm sorry if this topic does not belong here, I didn't know where to put it) Ok, you know whenever you download a repaint, a lot of the time it tells you to add stuff for the plane in the aircraft .cfg file. Well, I have tryed in Windows Wordpad and Notepad. Each time I can open it, but when I go to save it, it says "Cannot create the C://......aircraft.cfg file make sure that the path and file name are correct" Because of this, I am limited to very few repaints and other things. So, if someone could tell me what I am supposed to do, I would greatly appreciate it

Hello,Hi,I am new to editing scenery bgls. How would I locate and remove flatten codes contained in a scenery bgl. I would like to remove the flatten codes in a scenery bgl which I suspect are causing a flat area. My objective is to restore the orginal terrain. After following the instructions included with the LMWviewer, I cannot view F2002 and FS2004 bgls. What am I doing wrong? Thank you for your help.Sincerely,Walter COnklin

This topic has been moved by the moderator of this forum. It can be found at:http://forums.avsim.net/dcboard.php?az=sho...&topic_id=26990

This topic has been moved by the moderator of this forum. It can be found at:http://forums.avsim.net/dcboard.php?az=sho...&topic_id=26989

In anticipation of my trip to Rhodes next week I downloaded the scenery on here, by Michalis Triantafillou and Richard Probst. I installed all the other required files etc for the extra mods by Prev from the library...got rid of the dupe AFCAD but when I load LGRP in FS it wont even get past 0% and loading the scenery objects...any ideas?

Hello,I was free of those OOM's untill I installed KIAD from BluePrint.All of a sudden, when flying into KIAD, I get the message that Fs9 ran out of memory.I checked for the usual faults (multiple Afcad's, too much AI) but I am quite sure that those are not causing the problem.At least I think I am quite sure.There is the new afcad, installed with the airport, so I removed the Afcad file that came with the AI software.AI traffic was only 50 % and although I use only 35% most of the time, the airport seemed so empty that I put the slider on 50 % to give me some idea of a busy airport.Has anybody had the same experience with KIAD from BluePrint?Has anybody suggestions of po…

I am getting about 20-29 fps with with a minimum of 8. How can I get rid of the low drops.What can I change to improve this.AMD2200+ at 2.22GB RAM250GB HDD7950GT OC from BFG400 PSUFS9 .cfg=[MAIN]Location=64,64,1216,928Maximized=0HideMenuNormal=0HideMenuFullscreen=1Ave_Frame_Rate_Display=1[PANELS]IMAGE_QUALITY=1UNITS_OF_MEASURE=0QUICKTIPS=1PANEL_MASKING=1PANEL_STRETCHING=1[Weather]WindshieldPrecipitationEffects=1MinGustTime=10MaxGustTime=500MinGustRampSpeed=1MaxGustRampSpeed=200MinVarTime=5MaxVarTime=50MinVarRampSpeed=10MaxVarRampSpeed=75TurbulenceScale=1.000000DefaultVisibility=0DynWx_MedianDewPointSpread=10.000000DynWx_ProbCloudFormForMedianDewPoint=0.000500DynWx_MaxDewP…

When I select an aircraft I get this message: "Error: unableto find registered callback" and then FS9 crashes to desktop...

This topic has been moved by the moderator of this forum. It can be found at:http://forums.avsim.net/dcboard.php?az=sho...&topic_id=26981

I am curious if anyone here can tell me if any of the add-on AI packages would work decent enough to make it worth my time with this system...Here are my specs:MS Windows SP2, Intel Celeron D CPU 3.33 GHz, 367MB RAM, ATI Radeon Xpress 200 series...I currently run with default AI at 100% and scenery at dense and autogen at normal and average around 10-15 FPS at busy airports, and 20-25 in sparse areas..I am interested in hearing feedback from anyone with a similar system, whether you use PAI, WOAI, Ultimate Airlines, Traffic, or MyTraffic.Thanks for your feedback.

Hi,Is it normal to only get 50% CPU usage with FS2004?. When I run FSX I get 100% usage on both cores.(I have a Dual Core X6800 CPU with Windows XP Pro).My understanding in regards to FS2004, it is not capable of using both cores. But shouldn't I be able to get 100% out of one of my cores when running FS2004?.Seems that I am losing 50% of my CPU's processing power that could be used to get better performance inside FS2004.

Im about to downlaod IFDG's airbus and just wondering what people are using for the most realistic airbus panel?

Dear staff,AVSIM is one of the most important reference point of flight simulation all over the world.I perfectly understand that the enormous quantity of files, the quantity of activities for the simmers, is very expensive.So I perfectly understand that those activities need economical support, infact now simmers can donate to support them.I wish now to talk about Wilco Publishing, Feelthere and their behavior.When I bought "Airbus Delux Vol 1" 4 months ago, on wilco site I read:" Real simulation from complete Cold & Dark cockpit to full auto landing." (I have that web page saved on my HD) This is not true, their advertising was not correct was not a plain dealing, t…

I am having trouble with a single engine trail dragger. I have googled every fs site I can find to look for my problem. I have a many WWl and newer tail draggers and most turn fine,with the help of differential braking and rudder pedals. I have a couple ( a spade and a folker Dr.1 ) that are really stubborn. They will not turn at all. I have to go to slew mode toget them lined up with the runway and after any flight I go back to slew mode when I want to ground turn them. I know tail draggers are supposed to be hard to turn, but this is just impossible. I saw a fix with the DC3, but not with smaller tail draggers. I saw something about the contact points, but after looki…

Can someone please tell me why my cursor flickers and is hard to see when i run it over the instrument panel?Only happens in Flight sims.Changing the mouse didn't help.x(