The FS2004 (FS9) Forum
20979 topics in this forum
-
Hi all just wanted to let you know that while over the fsx forum I found this link from a post that virtuali posted over there to help some of the guys out with the new F/A-18A Hornet that they worked on for Flight Simulator X Acceleration.The scenery is done by the very super talented people at cloud9 check it out it looks beautiful! http://www.fsdreamteam.com/index.html please forgive me if this was posted before didnt see it on the search engine. you get both versons fsx and fs9.
-
- 23 replies
- 3k views
-
-
...at least I assume it is the day textures. Sim has been running fine for me up till today. I have not used it for about a week, but have used it extensively on this machine since I got it in September.It is night here now - loaded the sim, and changed the time of day to 'day', clicked 'fly' and it began to load, then crashed with a dialog - informing Microsoft etc.Hmmm - rebooted the computer - same thing.Moved and rebuilt the fs9.cfg file. Same thing.Noticed that if I let it start up at night, I DID get into the sim ok, and all appeared normal. Changed the time of day to 'day' from within the sim and it crashed again.So whats different between day and night - textur…
-
- 2 replies
- 1.1k views
-
-
Each time I set FS 2004 User Defined weather for a specific group of stations in a selection box I create and save it as a flight, it appears as set (few clouds, heavy rain, 2 miles vis, winds 270/light). However, when I leave FS9 then start FS9 later and select that flight, it replaces the weather with clear, winds 014/0.I have tried setting the user defined wx before selecting the stations and setting it after selecting stations. Nothing seems to save the User definte wx from one FS9 experience to the next.What could cause this? How do I make FS9 save user defined weather?----------------------------HP Laptop, XP Home SP2, AMD Turion 64 ML-37 1.99GHz, 1.37GB RAM, ATI R…
-
I've had the PSS Dash 8 forever, so I've been looking at the Majestic Dash 8 with interest. What could I expect, is their model way ahead of PSS? What I'm trying to say is, will I be blown away!!!!!!!!!!!!Dave FisherCYYZP4 Prescott 3.2e 478p 800mhz 1mg CPUP4P800SE Asus Motherboard2.5 gig PC3200 DDR RAM 400MHZGeForce 7600GT/512 OC'dMaxtor 80 Gig ATA 133 HD x2WDC WD800 80 Gig HDAntec 500watt true powerSharp 19 inch LCD MonitorSaitek AV8R-01 Joystickhttp://fs2crew.com/linepilot.jpg
-
- 7 replies
- 1.9k views
-
-
Hello,I'm looking for a add-on A380. It needs to have dynamic shine, a couple of airlines, a good virtual cockpit, realistic panel (doesn't need to be complex) and it needs to be frame rate friendly.Thanks
-
- 1 reply
- 715 views
-
-
-
Is there any place to find airline's CURRENT (or fairly recent) schedules? I pull a lot of my AI schedules off the 'retro-ai' site which is really good for old stuff. I guess with terror threats, etc, such info isn't as easy to come by any more. Thanks for any help.
-
Hi thereHello all Does anyone know where I can get textures for Club Air (based in Verona, Italy?I am looking for RJ70(146-100) &RJ85(146-200)I have tried looking for these on the usual sites and have tried to do a google search but not much joy at the moment so would be great if you know where I can find them ?I am also looking for any of these and if anyone can help it would be gratefully appreciated. UK International (UKI) - new airline basing flights from EMA at present with 1x 767-200 (reg G-CECU)and alsoLithuanian Airlines (now rebranded to flylal) I have the old textures but cannot find any freeware texture addons for the 737-300 new livery?Anyone got any ideas…
-
Hi allCan you help, I am running Vista 32bit with 2.8 Ghz processer and 4 gb Ram, I have FSX and FS9 on the PC, They were both working fine, now all of a sudden I get the below message when I try to run FS9 ?The disk is a new one and has about 465GB free space ?FSX still works fine, any ideas? Screen Shot attachedPaul
-
- 10 replies
- 1.4k views
-
-
I'm trying to use the PMDG 737 program in FS2004. When I try to program the FMC using the airport codes it says Not In Database. Any idea what I am doing wrong?
-
- 1 reply
- 648 views
-
-
-
Just wondering what people do with all the great warbirds that are available for FS9......is there any kind of online club.Dean PurcellnearCNK4Up the Irons!!
-
- 0 replies
- 759 views
-
-
Hiwhen i try to open the ADV display after i click on the option in the modules tab, and a long rectangular bar for lack of a better terms appears, I attempt to drag it down and size it, but it doesn't want to move when i attempt to adjust it with the left mouse button and drag. Any insight out there on how to get this working correctly?ThanksZach Bender K7LTF
-
- 1 reply
- 1k views
-
-
Hi allI have been using fs9 for a long time and recently started having a very strange problem. I am running on a fast healthy machine, the problem is as follows.1. I run fs9 and start 2. I am up and running as ready to go ( it could be anywhere) and then almost immediately the dialogue box comes up for a second time and runs through traffic weather etc. If I set a time in the drop down box,it will always reset to another time. it is really frustrating as i cannot set any time other than the time the program is set to. I have fsuipc on the system but i have unchecked the box that resets the time3. I have fscopilot and fsinn but they are resident and not always running4 I …
-
- 0 replies
- 660 views
-
-
-
i have a problem, i set up for any flight and once i take off after 2 minutes the screen goes black and the error message comes on, it says that fs9 had encountered and error and needs to shut down. ...my pc specs areevg 680i motherboardcore 2 duo 2.13ghz2GB DDR2 1066MHZ OCZ3 Hard Drives2 DVD +/- Burners8800 GTS Superclocked 320MB video card...so i dunno wat the problem is cuz its hard to think that its caused by the hardware....if anyone can help id appreciate it..oh, FS9 is not installed in Drive C, i have it in one of the extra disks in case i need to reformat the pc...thanks
-
- 1 reply
- 924 views
-
-
I just downloaded FSSCREEN Which looks like a efficient photo program. In the notes it states that I "may" need the above named file. Does anybody know if I need it or not, and if so where best place to download it?
-
Hi, I have a feeling I'm going to have to reinstall but with 40gigs worth of addons i thought i would try you guys first. I have a fairly powerfull PC with 3gigs of ram 512mb ATI card and i get great frames in fs9 (locked at 25) even flying into Schipol heathrow and Lax (I dont use AI due to flying on vatsim everytime) but over the last few months the sim has developed a strange 2 second pause at least once every 20 seconds. I have used filemon tried the default aircraft and removed UT europe etc and nothing's fixed it.. I even bought new ram which now resides on my second active sky, squawkbox pc because it made no diffrence. It's frustrating :( the sim is as smooth as …
-
- 8 replies
- 1.2k views
-
-
Hey everyone,Does anybody know of a good merge of the PMDG panel & flight dynamics merged with the Overland / Simmer sky 737 NG model. There are a few nice paints on the Overland model, but I love the PMDG panel and Flight dynamics(who doesn't ;-) )Thanks if someone can help out.Cheers,Dinshaw.
-
- 1 reply
- 1.7k views
-
-
Hi friends!!!Here is the Link to Instrument Raw data Videos!!!! Happy Flying!!!!!!http://www.dailymotion.com/visited/Lespindo2/1
-
- 2 replies
- 1k views
-
-
I just bought these and I can't figure out how to release my brakes now. When I apply both toe brakes, the brakes stay on! Did I miss something?As always, thanks in advance to the group!
-
- 11 replies
- 2.7k views
-
-
I have big trouble with controlling my speed, then I taxi my turboprop aircraft. Both the standard King Air 350, and by all other downloaded on the net. The the problem is, the speed increase up to about 25-30 kts, even with the trottle in full idle position.I use a joystick there I can control the engine and the propeller individual. I have no problems with piston engine aircraft with changeable propellers. The 2 controllers for engine and propellers works fine, then I am in the air.There have to be some parameters in the *.air or aircraft.cfg to tweak? I have tried to change some of the parameters, but it doesn't change much.
-
- 8 replies
- 2.5k views
-
-
Can someone tell me How to put a picture of this in this in here to save me a bunch of explaining please:-)
-
I've bought Friendly Panels. The manual says I should be able tocall up the FMC by pressing SHIFT+8 but unfortunately this doesn'twork. The FMC is listed in pull down menu ViewInstruments. Is thereany way I can assign a key combo to make it come up without havingto pull down menu each time?Thanks
-
- 0 replies
- 683 views
-
-
I recently rebuilt my flightsim box with all new highend components. The specs include (bfg nvidia 8800gtx oc2 graphics card,evga nforce 68oi sli mainboard,2GB of corsair xms2 DDR2-800 system memory,2 seagate sataII 320 gb harddrives in an Zalman Fatal1ty FC-ZE1 aluminum case). I had fs9 running smooth as glass for two days and then fs9 crashed on a flight from kdal to kiad. The event log stated the crash was caused by an ntdll.dll error.I read in one of the other forums this error is caused by explorer.exe. I'm really looking for more input on how to fix this problem once and for all.Thanks for any help you guys can give.Alex
-
- 3 replies
- 1.5k views
-