The FS2004 (FS9) Forum
20979 topics in this forum
-
Years ago I had seen a site where one can find gauges for FS9 or similar MS sims if he is missing some and needs to find them to put them into his gauges>panel.Does anyone know any site like that?
-
I've been using this program and it really helps with my AI traffic. Do most of you just use the default settings? Some of the settings I'm not so sure what they perform so any suggestions are welcome.thanks
-
I'm having a problem running the startup procedure printed in the PMDG 737 600/700 Manual. When running through the engine start up the right engine will not fire. I've run the procedure repeatedly as laid out in the manual but that right engine just won't start. Any advice would be greatly appreciatedLarry Schechter
-
hi all, i have two computers, a pc and a laptop and i have heard that i can run certain programs in another pc so that the pc running fs9 is not affected with these. I am looking for some tutorial/steps/guide on how to do this, my pc crashes sometimes and i dont know why, so I'd like if possible to take some load out of it so it can run FS9 smoothly.Thank youMy specs:EVGA 680i motherboardC2D E6400 2.13GHZ2GB OCZ REAPER 1066MHZ DDR2 EVGA 8800GTS OC 320MB19" WS VIEWSONIC3 HDD'SXFI SOUND CARDSAITEK X-45 JOYSTICKPS: i am currently running, fs real time, active sky 6, fs9 with squawkbox in my pc doing a flight. so far no crash/error
-
I really wish that Imagine would have a support forum. I've had problems installing KEWR, TJSJ, and KCLT. I've emailed them before and they basically told I was on my own to figure out what was going wrong with EWR.Now I'm having problems with TJSJ and I think this might be the last time I get an imagine simulation product.I've installed TJSJ and I see waves crashing on the northenr runway. You don't see water, you just see the white wave crests crashing. I also noticed that when my aircraft is on the runways I can't see a shadow. I get my own shadow on the ramps, but not on the runways.I noticed that KEWR and KCLT both add flatten or exclude switches to the Scenery.cfg b…
-
- 37 replies
- 7.6k views
-
-
I recently (only jsut noticed it!) installed SP3 for iFly's FS9 747. There are one or two issues with this - some new, some unresolved from the past. I wonder if others with the iFly 747 have the same thing?1. The new "iFly747-400.gau" file means that the Heading & Altitude knobs are frozen on the AP panel. They only come on line when I'm ready to taxi (or sometimes not at all). Searching through the forums, someone said that this is because the avionics are off - but mine are definitely on! Restoring the original (SP2?) gauge fixes this, but maybe I am missing new things by deleting the SP3 gauge and putting the older one back?2. Can't start engines during pushback. …
-
- 2 replies
- 1.7k views
-
-
Hello everyone,A few months ago, I upgraded my XPS
-
- 2 replies
- 969 views
-
-
does any body know where i can get an onur air a320 idfg for fs9 if so please could you send me it at [email protected]
-
Hi everyoneCan someone please help me with this request-At the moment when I zoom in/out when in vc mode I can only get the preset values of 71%.50% etc.I would like to change these presets.I have looked in the fs9.cfg file but can't see anything.Could you please tell me what to change.Looking forward to your help.Qas
-
- 2 replies
- 915 views
-
-
Hi! I have been searching all over for a paintkit for Dreamwings Fokker 50.... and i really cant find it! anyone have it laying around or know where i can find it?Please either mail it to me or add me on msn,([email protected])Really big thanks for your help=)
-
A month ago I downloaded from a disc supplied with the magazine, PC Pilot, the Piper Warrior PA28-161. It's time was up the other night and I removed the program as advised.I must have done something wrong, because now I can't open FS 2004. When I open the program the initial "Century of Flight, DC-3,etc." window has within it a smaller window that that says, "Aircraft initialization failure. jf warrior_Demo". When you close this window, all vanishes and you're back to the computer's deskstop. I rebooted, no help. I removed and reloaded FS 2004, no help. Thank you for your help.By the way, I liked the Warrior so much I bought the FlightClub X disk to use when the demo …
-
Would someone please tell me what item i need to change this to 30 Miles.Tim
-
i recent uninstalled a lot of unnecessary stuff i had on FS9.. like planes i dont fly scenery i dont use.. including the cloud 9 LAX scenery becasue my frame rate was not good with that scenery.. and ever since then my FS9 wont start.. it'll look likes its going to start then it stops and nothing happens... any ideas would be greatly appreciated..
-
Hi allHave been using the pmdg product for a while now,no probs.Purchased Level D 767 and installed,now when i start FS 2004 i get the following. Level D Sim Module Bad Licence for B767-300 FS 2004 will now exit OKThen error fs9 Fs unable to load some a/c or software you can continue to use fs but some a/c or software will be disabled file pmdgoptions.dll OK FS then quitsAny ideasDave
-
I would appreciate input on this topic.I have an original fs9(sp1) installation and have only added some WOI airline schedules.Thanks,Nuno
-
I have been searching the web for a repaint of Dreamwings FOKKER 50 in AMAPOLA FLYG
-
- 0 replies
- 818 views
-
-
I just bough this product 4 days ago...Generaly speaking.. as Airbus fans, I eagerly want to fly these birds immediately after I downloaded it.I installed it on FS2004 - win XP - Core 2 Duo 2.4GHz - 2GB Ram - nVidia Geforce 8800 GTX.The first bird that I wanna fly is A330-300 RR... but when I selected this bird... It's very disapointing because of several "major" visual bugs on it's model...1. A330-300 RR External Model error at the front & rear gear bay door. The door position and animation are not correct (bug)2. All A330 VC model have incorrect rudder pedal positions... it should be balanced when rudder is stright...3. Other than visual model, I noticed that there'…
-
Went on the sim last night,chose the TVB and everything comes up ok except that when i click on an aircraft to follow, it doesn't do squat. Stays in the spot view of my start location. I can shift views of where the TVB 'invisibley' is but it will not go to any chosen aircraft. I know it's something simple but have been racking my brains out trying to figure out what it is. I even reinstalled the TVB to no avail.Any suggestions?
-
- 1 reply
- 876 views
-
-
I used to have the orriginal version. Anyone know how 'different' the v2 might be?
-
- 2 replies
- 859 views
-
-
for FS9? As the AOPA bird isnt FS9 compliant, sure would be nice to have a repaint. I would do it but just dont have the time due to my maniac business travel this year.Eric
-
- 0 replies
- 667 views
-
-
I have suddenly started to get the following error message when I try to load FS9Your computer appears to be out of available Memory. You may not have enought spare hard drive space - use Disk Clean and try again etc etc etc.Whereas at the same time I have 800+ Mb of available Memory and 78Gb of spare HD space.I would be grateful if anyone can help me solve this problem so I can get back to flying once againMany thanksrafvr
-
This topic has been moved by the moderator of this forum. It can be found at:http://forums.avsim.net/dcboard.php?az=sho...&topic_id=30686
-
- 0 replies
- 880 views
-
-
Correct me if I am wrong, but I recall FT stating that when the Vol. 2 would be released there would be another SP for the Vol. 1. Especially the FMGC still needs improvement.The first remarks I read here about the FMGC in Vol. 2 does not give me the expected positive feeling that it will finally be fulfilling its claims, but nevertheless I hope Wilco/FT can indicate when I can expect the SP.Thanks,Menno
-
- 3 replies
- 1k views
-
-
Has anyone built a better KLAS? Simfliers is showing it's age.Dave
-
- 0 replies
- 703 views
-
-
This topic has been moved by the moderator of this forum. It can be found at:http://forums.avsim.net/dcboard.php?az=sho...&topic_id=30673