The FS2004 (FS9) Forum

I've seen several apps that let you enhance airports at will, but I've not seen any over all app that will modify all airports of a certain size with jetways and static vehicles, etc.Does anyone know if such an application exists? Or am I stuck with enhancing my own?

HiWhere are the videos store on the hardrive??Peter

Greetings all,After spending numerous hours of tweeking, removing and reinstalling drivers, defragging, etc; I've decided to remove FSX from my system and go back to FS9. My 2 yr old system just cannot handle FSX with the settings I prefer. Saying that, I am seeking opinions on what folks are using for:MeshTerrainEnvironmentWeatherI'd rather spend a "few" bucks on the above, instead of spending 300 plus on a new vid card, that I would probably have to spend more on updating my system to use said card!My current sys is:Dell XPS 400; dual core 2.6ghz cpueVGA 7950GT 512meg, PCIe graphics card with latest NvId drivers2 Gig ram22" Viewsonic LCD MonI can run fs9 on this sys w…

hello...can't load scenery in fs9 in vista...when i add a scenery in addon scenery...open the game scenery library and press add area.....the area shows up in the box and turns blue and nothing happens...signed bewildered

Ouch, not sure what I did, but it seems I must have deleted the default FS9 747-400. Is there any way to get it back besides loading up FS all over again?

How do you set the squawk code? I cannt get the lefthand, 1st digit to move or change? Have to "scroll" thru 3-5000 digits to set the code.When changing altitude, how do you set the VS (vertical feet per second.) I cannt find the "hotspot" to change it. Thanks, jerrycwo4 PS I'm flying to Paris right now. When I selected the Citation X for this flight "it" stated that this aircraft would fly around 500 knts but I get an overspeed whenI set the IAS to 340, with a ground speed of 401 knts and that's slower that a P-51 Mustang. Why want this plane go 500 knots WITHOUT an OVERSPEED alarm going off? Anyway to fix this?

Hello everyone,I have got a major problem at hand here:I just finished installing my flightsim, had the F1 ATR 72 installed. Everything was fine.Now I install the Eurowings 2004 Package to fly my beloved BAe146 again and there is the problem: All my digital readouts are gone, even the Standard Cessna does not show me any text on the radios and nav equipment, the ATR does not show any digital readouts on the engine gauges...FSUIPC hasn't been overwritten by a previous version, I ruled that one out myself but I really cannot find any other possible reason for all the radios and nav gauges showing no text.Maybe someone here has already experienced the same... I would be real…

Hii all i'm searching a long for a Airbus A321-200 or some A321 it doesn't matter which one.I can't find any good A321 which includes an virtual cockpit with good working gauges and all other things Can someone help me I would be appreciate if someone can help

I've come across a strange problem with the autothrottle in a couple of my payware addons (PSS 757 and Maddog 2006).Problem is, when the aircraft is banking in turns, the autothrottle seems to be unable to read the IAS properly. The engines start increasing or decreasing, resulting in the speed deviating from the commanded speed.I made a 90 degree turn in the 757 today. It was in VNAV mode, commanded to maintain 292kts. For some reason, during the turn, the throttles reduced, causing the speed to drop to 250kts by the time the turn was complete.Is this a known problem with certain aircraft and FS9? Are there any ways to fix it?

You heard me right. REX will be released for FSX first followed by FS9. Weather engine and all. Check their AVSIM forum for their official announcement.Curt

Hi guys,ATPL student here....does anyone know of a Warrior model suitable for use as AI?Thanks :) Upcoming FlightsEaster at HomeIB159 XRY-MAD 1820/1920 A319IB3168 MAD-LHR 2050/2210 A320BA464 LHR-MAD 1310/1630 B752IB168 MAD-XRY 1830/1935 MD88 http://www.dreamfleet2000.com/a320/custbanner2.jpg

If you don't like slamming on the brakes when you hit the brake button on your joystick, you may like this;You can change the braking force of the brake button, but you'll need a registered FSUIPC for this so if you have one, continue reading. This will take about 5 minutes to complete the procedure. First, we'll delete the joystick assignment in Flight Simulator:1. Go to Options -> Controls -> Assignments. 2. Select "General Aircraft Commands" from the Event Category pull-down menu.3. Click on the "Brakes apply/release" line (3rd one)4. Click on the "Delete Joystick Assignment" button5. We're done here, close the Assignments Window.Now we'll re-assign brake button …

On some of my aircraft you can implement 'incremental' speed brakes that you can notch up a point at a time, but on my POSKY 747, it's kind of an all or nothing deal. You jump from 'armed' to full out which doesn't do well on descent. I like to be able to incrementally set the speed brake until I'm slow enough that I can start my 'flaps down' operation. Is there a scalar I can fix in the aircraft.cfg to adjust this?Thanks,

Hey guys, Quick Q's, for some reason everytime i start a flight in the PMDG 747 and get ready to set up the FMC, everything goes black in the cockpit PFD MFD EICAS everything including FMC goes black. This only happens if input something into the FMC. Has this happend to anyone and are there solution? thank you very much ahead of time thank you

Hi AllFirstly, apologies if this has been mentioned before.When playing around with our old friend, filemon... http://www.softpedia.com/progDownload/File...nload-3365.htmlI noticed that FS was processing an awful lot of third-party add-on scenery BGL files that were, based on the flight i was taking, totally unecessary. For example, when flying back from Vienna, i could see that a lot of BGL's from Aerosoft's Spanish Airports were being processed. I believe that FS will process all scenery files that are a set distance away from your aircraft (?)So now what i now do within scenery manager is only activate those airport scenery files that are relevant to the flight i'm tak…

Hi all, I did search the forum but didn't come across such a problem, so apologies if this is already on another post.Problem description:During flight using a couple of planes (mainly the default 737-400), my IAS resets to 0. This causes obvious problems such as not knowing my current climb, cruise, approach, and landing speed.Does anyone know the cause and solution to this problem?Thanks in advance.Running FS2004 SP1, default scenery, default 737-400.

Hi everyone,I was wondering if the SCS Tu-134 is available at any other sites, other than their own one 'www.sovclassim.org'.Pretty much all the links on their website return a '404' error, so I can't download it. Thought I had it backed up somewhere, but after searching my CD-R backups of FS downloads, I don't.I believe older versions are available from other sites, but I'm after 'SCS-Tu-134-v1.0.0.zip'.Regards,Al.EDIT - Sorry, found links for alternative downloads at the Project Tupolev forums - Wonderful thing the flightsim community - the answer is usually only just around the corner!

This topic has been moved by the moderator of this forum. It can be found at:http://forums.avsim.net/dcboard.php?az=sho...7&topic_id=4044

Hello! I recently downloaded an afcad for Wattay Intl. I'm unfamiliar installing it. How do I do it? And what do afcads do? Because I want to put in gates for the airport because the airport has no gates.

When you make a long flight with a lot of "waypoints/VOR's", on the GPS you can not see all of them because the "list" of them are too long. The "slider bar" on the right hand side will NOT move so that you can see the bottom of the list. Is there anyway to move the list DOWN so the last points on the list can be seen? I've tried about everything and I can not get the list to move down. Thanks, jerrycwo4

I have been using JAB2000 ever since it was introduced. It was the most convenient aircraft/panel/sound manager that I have ever seen.I am running FS2004 and it has served me well. Unfortunately, it has now "died" as it gives me error messages that indicates that there is not enough memory available.I am running 2 Gig of RAM so I know that it must be a program limitation as I have a ton of aircraft (AI included).The developer "quit" the project while still in beta phase due to others evidently stealing his ideas/coding. There is therefore, no support.Does anyone have a suggestion for another aircraft manager that is simple to use, and has an easy method for assigning p…

After changing some parking spots using AFCAD2, is it possible then to remove scenery items like this?http://forums.avsim.net/user_files/185598.jpg

I have this problem. First, it seemed to me that i fly somewhat slow. Doing IVAO Long Haul tour i noticed that other planes flying the same leg are moving faster on the map, they even overtake me enroute with lower mach speeds. Just now i measured some things and found out that after flying for 60 minutes at 450 ground speed i only covered 270nm of the route on the map. Its only so if FS is being run in the background. When FS is opened on the screen, the speed is normal. It appears that simulation slows down considerably when i switch to desktop during the flight (Alt+Tab), somehow it works very slow in the background. Any idea how to correct that? I use laptop, Core 2 D…

Greetings,I did not keep a backup copy of the (2) patches that are available for ISD LIMC 2005. There website has been down for a few days, thus i cannot access the forums to retrieve the links. Does anybody have these patches and would be willing to share them? There are other patches that are not within the Avsim library.Thank you in AdvancePaxBrad

I am looking for freeware mesh that covers the Thunder Bay in Canada (around the airport) and Victoria British Columbia (again around the airport).There are so many mesh files in the library I am not sure which ones (if any) covers those areas.