The FS2004 (FS9) Forum

Hi all :DWondering what you use for AI sounds, reverse thrust etc. There seem to be a few avalible, some a simple change others require all AI cfg edits.Thanks for your thoughts, regards :D

This topic has been moved by the moderator of this forum. It can be found at:http://forums.avsim.net/dcboard.php?az=sho...&topic_id=34834

HI Guys,Having not flown Fs9 for a while I decided to take the 737 for a spin... Although the default engine sound package is fine ,are there any freeware or payware sound packages that improve the 737,if so which is the best one available?Thanks,Regards,Martin.

Hello AllI notice that in the download files section today there are two 777s in Delta Airlines livery.These appear to be the much awaited 777s from Posky.Can someone confirm please.cheers Andy

Does your CD drive "see" any other disk or play music disks or otherwise perform as it should?If not, you certainly would seem to have a hardware problem.

My question is about the startup procedure. I have seen the video posted on http://au.youtube.com/watch regarding those procedures. However, I cannot seem to get the "green" light to illuminate while trying to connect to the outside power source and stop the battery from draining. Did I miss a step in trying to emulate the video startup procedure?Thanks

WOW just came accross these FS11 shots first shots released http://www.flightsimworld.com/forums/index.php?

If you did succeed, how 'bout a what other than taking the whole folder over to FSX and finding the gauges in the Gauge folder--did you find out you needed to do to make that a successful port?Thanks in advance!Mitch

just got the wilco CRJ 2004 but as some of you are aware the manual, if you can call it that, is lacking. are there ANY tutorialsor any place to go to find out how this aircraft works? things seem to work in some sort of order, like you can't set the VS unless youhave the FD on, didn't know that till i read it in the feelthere forum. i suppose i could just sit around and flip switches and turn knobs until things start coming together but i don't want to grow old in the process. i am reading what comes with it but would like something like a in depth tutorial if one is availiable somewhere. anyone advice? thanks, william

I'm using AI Smooth and want to configure the LAX runways for proper landing and departures as close to real life as I can. Are all 4 runways used for both landings/departures or are they split up 2 each or?? I guess it changes depending on conditions but just wondering if anyone knew what they're basic procedure was. Not sure where to find that. Thanks

This topic has been moved by the moderator of this forum. It can be found at:http://forums.avsim.net/dcboard.php?az=sho...0&topic_id=2722

Whenever I am at an airport all of the ground textures are black just adjacent to runways and taxiways. The texture of the runways, aprons, and taxiways are correct. It is also black when flying over airports.I have Ultimate Terrain installed and FSGENESIS landclass installed.I have a Dell Dimension Pentium 4 2.8 ghz processor with 1 GB of memeory and an ATI 1300 video card. I run AA at 2x and AF at 4x.Any suggestions would be welcome.ThanksMike from Arlington,TX

I am trying to help a friend who has an issue with his FS2002 scenery.cfg file. I do not have FS2002 on my machine any more nor do I have access to the install disks.Would someone who does still have it on their machine please send me a copy of their scenery.cfg file?I am only interested in reviewing the proper syntax of the various default entries - and do care what you may have added to it.Thanks in advance.

It seems to be getting closer: http://uk.youtube.com/watch?v=4rdxOJBq4x0

On a lighter note...Has anybody done something like this? I've flown under the San Francisco Golden Gate Bridge, twice with the J-3 Cub and once with the Aerosoft Beaver (on floats). I know in the real flying world this is a big no-no. When I tell my oldest boy, he says, Papa, that's illegal. I tell him, but this is sim flying. He still admonishes me.:-(Anybody have a similar confession?--Roger

As you see, the statue of liberty should be an island surrounded by water.I'm sorry my integrated graphics sucks.What could be the conflict?I'm using FSGlobal2008, Frf's KJFK, Imagine Sim's KLGA, and Aerosoft Manhattan.

I'm just curious: can people let me know why they fly Airbus jets as opposed to other manufacturers? I own the Overland Boeings and love them, but recently it seems I've seen a larger number of repaints and .cfg fixes for their Airbus series which got me wondering what I may be missing. I've avoided Airbus simply because (I think) they're flown mainly using a joystick instead of a yoke and, although I'm not a stickler for ultimate realism, I don't like simming with a joystick so this detail has kept me from flying Airbus. EDIT: BTW, I have flown some smaller jets from POSKY, as well as the MD11 that comes with the Overland Boeing package, so I do have experience flyin…

Hi folks,As some of you know, I have been updating the Overland FDE files and have uploaded the Airbus A320 family to AVSIM already. As I progress through the models, I am noticing some panel/gauge issues. Specifically, The A330 family Fuel on Board digit display is off such that at full fuel load, the display reads 24,000 lbs instead of 240,000 lbs. The flap display is a bit off as well.Is anyone else experiencing this? I use an LCD monitor running at 1600x1200 resolution, and I get the same panel/gauge issues at lower resolutions. I've fixed them on my system, and if others are having the same problems, I'll include the fixes with the FDE updates when I upload to AVSIM.…

I'm curious about zinertecs addon ULTIMATE WATER FX and night environment. If you already have UT and Fe and GEPro have they something to offer? Are their water and night even better?

There used to be an article on how to adjust the nav, strobe and beacon lights. I can't seem to find it. Any help would be appreciated. I just recently purchased Shockwave's 3D lights Redux and am trying to use the light config for the PSS B777 and need to reposition the nav, strobe and beacon lights.

I have just bought this Aircraft & Im Very NO make that EXTREMELY disappointed in this model, the animations are far too slow, it doesnt have a steerable nose wheel the model seems to be very unresponsive to your input, ie: upon slowing down the aircraft takes what seems to be an eternity to stop (ok maybe quite not that long but it sure feels like it) I have better FREEWARE aircraft than this!in all Im really disappointed in it & I feel like Ive completely wasted my money, if this is anything to go by I WONT be buying anymore of their aircraft. has anyone else bought this model & feel the same way? sorry to have a moan but I really dont like this aircraft one…

If you want to remove 1 certain airport from thos scenery collection, say ENCN, is removing all files with ENCN sufficient, or are there other files in the Scenery folder that have to be removed too? Obviously the AFCAD also!Thanks!Rick

You military AI buffs might want to check out the new release from MAIW.Nick Black has done it again.KJ

Hi.I was hoping that someone would be kind enough to add their entries for the relevant aircraft listed below with this fantastic effect file.It really does add to the realism of the sim to have this blowing water on the runway when you kick in the reverse thrust.The problem is that I have had mixed results with this, more than likely because I have got a few things wrong on some of the aircraft.For example, I can't have this with the Captain Sim Legendary 707 as it has it's own dark smoke effect the same as the C130, and makes the reverser effect come on during the take off role too. And the Wilco/Feelthere CRJ200 does not make the effect show up in the sim at all.also t…

Hi all,I'm running FS9 on WinXP and owe a MS Sidewinder 2.I was wondering if it is possible to assign commands to combinations of keyboard + joystick keys, e.g. shift + joystick button 4, or ctrl + axis 3, etc.Does anybody know how to do, or if there exists any soft that allows it?Thanks in advance,Rub