The FS2004 (FS9) Forum
20979 topics in this forum
-
So with the new AS EHAM just released I was hoping someone can give me a general idea of the runways used. For example, 36L and 18R ALL the way out there by itself, is that for landings only? Both? Are any runways 4,22 not used at all? Are all other runways used for takeoff and landing?Just trying to get PFE set up correctly before I head out from KEWR ;) Thanks in advance,Going to post in the AS forum real quick as well.-PEdit...To that point, anyone know where CO would park so PFE can reserve that spot for me? Thank You!!
-
- 12 replies
- 2.6k views
-
-
-
-
Hi all,I have just bought this computer:http://cgi.ebay.co.uk/ws/eBayISAPI.dll?Vie...e=STRK:MEWNX:ITCould you please tell me how it will run fs9 with loads of add-ons e.g lagging, fps etc. ThanksDale
-
- 16 replies
- 2.8k views
-
-
After a complete Fs9 Re-Install I find the Menu Bar will not 'stay put'! It's been years since I did the last Install and I've forgotten how to keep it 'Pinned' - any help would be greatly appreciated,Ken
-
I have Active Sky 6.5, and awesome weather program. I would really like it if I knew where the Active Radar feature is on AS6.5. I've looked around for some time, but couldn't find it.
-
- 13 replies
- 2.5k views
-
-
Hi,Been having a terrible time trying to get the wonderful DF A36 installed on my Win7-64 box w/ $50 RXP GNS430 gauge.From what I got from the RXP developer, in addition to the GNS430, I need to buy new FL-T gauges (KI256 ADI, etc.) to make it work without CTDs.However, I've read posts from people who successfully got the A36 flying by just changing the panel.cfg entries for the GNS430...If you're on of the lucky ones, could you post your panel.cfg and RXPSTACK.INI?Thanks,Pat
-
- 0 replies
- 699 views
-
-
I have pulled some repaints off of the library to use with my ** B-17 and P-51 and P-47. I have followed the directions as they are written, I believe but I must be missing something. For the '51, the repaint comes up in the A/C file as "P-51D Surplus" and shows the two models that were in the Repaint file. When I bring the A/C up all I get is an unmarked and unpainted A/C. although, the color files are appearing in the "A/C's files. Also, for the B-17, tha same problem but the different A/C repaint doesn't even come up in the A/C model available when the Sim is brought up. Is there a "Clear, basic" tutorial for the Computer Repaint Challenged? It would seem that the down…
-
Hello all:I read somewhere about a tool that renumbers your scenery config file. Anyone know where I can find that?
-
- 1 reply
- 948 views
-
-
My specs are ....Intel Core i7-960 Bloomfield 3.2GHz 8MB L3 Cache LGA 1366 ASRock X58 Extreme LGA 1366 Intel X58 ATX Intel Motherboard dual channel ddr3 2000 4gbcreative extreme gamer sound card4870 2gb ati video cardssd 160 gb intel harddrivePlease help me out there are so many topics on this that refer to fsx just not fs9....Thanks in advance!
-
Hello, i'me french.I search the orly's scenery by FSfrance in freeware, :( and I know Fsfrancec close his website, because my parents doesn't want to pay a scenery for FS :( thanks you :( bye
-
Hi Everone ;I want to change, the settings of green message line and characters in fs2004. I could not find where I can change. I also search on the Avsim Forum and on Internet.How I can do.Can you help me.Best,
-
is there a way to change my engine sppol up time in the pmdg 747 as i have downloaded some new sound files which i feel are an improvement, however with the CF6 i have noticed that ignition occurs on the model before it occurs on the sound, therefore you do not get the familiar 'boom' in the sound as light up occurs.if anyone could help i would be most appreicative
-
- 3 replies
- 1.1k views
-
-
Ive downloaded AES base pack. But i want to uninstall it, but there is no uninstall opener or anything. Even if i go to uninstall programmes there is nothing. And now FS2004 won't even load! It says error cannot read file....????? Whats going on, and how can i help this.
-
- 4 replies
- 1.2k views
-
-
Is there a way to only have my AI traffic as part of my scenery or will all the planes i have in my aircraft folder play a part?many thanks
-
- 12 replies
- 1.8k views
-
-
I know there's a patch to solve the KSEA mesh problem, but the FlightScenery sit is down.Does anyone know where i can find this patch?Thanks
-
- 9 replies
- 4.4k views
-
-
Hello together!I bought Captain Sim's Legendary C-130 and her extra package ... well, all works fine, except that i can't add the external fuel tanks (wing tanks) to some 'extra models' and remove JATO. Does someboby get a solution for my problem? Or does somebody get an idea to alter the responsible config-file (which i don't know)?Good bye and kind regards!Elmar
-
- 3 replies
- 1.3k views
-
-
This is so frustrating. From time to time, ofter the trottles get stuck and im only able to use one throttle. Example...left throttle leaver will not move, but the right lever will move. any suggestions...
-
- 2 replies
- 855 views
-
-
Has anyone tried to get FSD's Cessna 337 and Reality XP's WX radar to work together? The issue that I'm having is that I've added the gauge to the aircraft but the RXP gauge won't turn on. It's in the correct position...looks like it wants to turn on but doesn't. Any advice would be well received...so please advise and thanks!Mark
-
- 2 replies
- 1.3k views
-
-
Anyone with any ideas why Microsoft's cockamania piece of flight simulation software like most of their other products is so full of bugs? Just installed a scenery for Khasab AB(OOKB) in Oman,from Avsim's own library.It comes with its own installer,so should be pretty simple to merge with FS9's scenery.That's the theory.Have done the usual scenery install procedure.However,in reality,on Rwy 1 ready for T/O,I immediately get a CTD because of FS9 throwing up an Object Collision when in fact there is nothing on the runway.I have had the same issue with the Inchon airport scenery,when at a heavy gate,I get an Object Collision.This is driving me nuts! RICK
-
- 15 replies
- 3.4k views
-
-
I've been flying from Vancouver to (near) Whistler Mountain in two differant ways. There is a small lake with seaplane landing near by(CAE5) and also I've been flying into Pemberton (CYPS) which is close. The people that are going there from Vancouver by air (FOR REAL), what airport are they flying into? They, the 2 flights, are two of the most beautiful flights I've ever flown in 12 years of Flight Simulation. jerrycwo4Whistler Mountain is at approx: 50-07 N, 122-56W
-
- 2 replies
- 2k views
-
-
does anyone know if FSGenesis - Landclass and FS Global do the same?
-
Right i know the soundpack works reat with the CS757. But when i put it in the CS757's sound folder it wiped out all the horns and warning sounds. What i did is delete the CS757 sound in the aircraft sound folder, then put the TSS RB211 in the CS757 sound folder. Im i suppose to keep both?
-
Tried a flight to CYVR- Vancouver, B.C. and neither "GATE KEEPER" or DBS's "AIRPORT GPS" would show any data (gates/runways) there. If you have either of these programs would you give it a try and see if they work for you. Thanks jerrycwo4
-
- 1 reply
- 1.1k views
-
-
Hello, I just red that Aerosoft has released the EHAM scenery. So apparently its not eol yet. But looking at PMDG, FS9 is dead and its a shame (looking at the next 737 NG project)Twice i flew around the world online with a friend with the PMDG 747 and the PDMG 737-800. I flew about 300 logged flights within Europe = +/- 450 hours. I know the planes, the airports (mostly in EU) difficult approaches ect. Came far with FSpassengers. Even FSpassengers is eol concerning FS9. There will be no FS9 updates anymore. Sad...truly sad. FSX is not in reach and never will be due to the heavy system impact. (maybe in 2018 we'll bee able to get the framerates like FS9). Hopefully Aeroso…
-
- 5 replies
- 1.3k views
-